Produkt information
Castle Creations kvalitetskontroller specielt designet til heli-brug, men kan også bruges til elektriske fly. Controlleren er klar til at bruge lige ud af pakken, men giver dig en række ekstra muligheder for yderligere programmering. Talon 35 ESC har en BEC designet til dagens servoer, og pumper hele 7 ampere og 5 ampere kontinuerligt, hvilket skulle gøre selv de mest magt hungrige servoer glade.
PS! Produktteksten er maskineoversat fra norsk.
Specifikationer | |
| Celler | 2S-6S LiPo |
| Vægt | 27,8 G |
| Størrelse (Lx Bx H) | 49X 22,4x 8,4 mm |
| Power Træk | 35 |
| BEC | 5A |
Product details in english
This "mighty mini" can take on the most extreme maneuvers while keeping it?s cool. Talon 35 is intended for use in 450 Heli setups running up to 6S or .10 to .20 fixed wing applications pulling up to 35 amps and boasts a 7 amp peak/5 amp continuous BEC, keeping even the most draining servos at ease. Talon 35 also offers Castle?s industry-leading helicopter functions, not to mention easy programming using the Castle Link USB adapter (coupon included). The compact layout and thin profile make mounting Talon 35 simple and stress-free in any setup.
- Item number 010-0122-00
- Input voltage MIN: 2S LiPo
- MAX: 6S LiPo
- Max continuous amperage at full throttle 35 amps*
- BEC voltage (voltage regulator for powering radio and servos) 5.5 volts
- BEC output 7 amp peak** 5 amp continuous (always check servo draw prior to first flight)
- Dimensions
- Width: 0.88" (22.4mm)
- Length: 1.93" (49mm)
- Depth: 0.33" (8.4mm)
- Weight (with wires) 0.98 oz. (27.8g)
- Weight (without wires) 0.42 oz (12g)
Items needed for operation or installation :Battery connector and motor connectors sold separately
Programmability Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Castle Link adapter included in package) and freely downloadable Castle Link Windows software.
*RC HOBBY APPLICATION RATING: 35 amps for the duration of a single 4,000 mAh battery pack with the ESC in contact with a 5 mph airflow of 25C (77F) or cooler air. Controller temperature must never exceed 100C (212F). Exceeding current or temperature ratings may damage components and may shorten the life of the ESC. Always verify system current draw at full-throttle. Decrease load or increase airflow to decrease the ESC?s operating temperature.
**Peak indicates amperage sustainable for most servos? current draw transients. Always confirm servo current draw before the first flight of the model.
Mere info på engelsk
Dele
Find nemt delene
Dette produkt har PartFinder
Partfinder er designet til at gøre det så nemt som muligt at finde den rigtige del til produktet ved hjælp af eksploderede billeder og/eller styklister.
Åbn PartFinder
c
Dele du savner? Klik her!