Fragtfri bestilling over 200 kr. Vi fortolder!

Komplett utvalg av elektro- og nitrohelikopter samt servoer, batterier, elektronikk m.m.
184
Align 300X, leveres med digitale servoer og børsteløs motoropsætning komplet samlet. Du har også brug for flybarless-enhed, sender, modtager, batteri (3s 1300 XT30) og oplader, se anbefalet tilbehør.
kr 2.870,-
+
-
3|5|553
184
Align sætter en ny standard i 450-klassen med 450L Dominator! Her er 6S LiPo kombineret med kraftig motor, kraftig ESC og 36 cm knive, dette giver en 450 med overlegen styrke og stabilitet! Modellen leveres nu med BeastX Microbeaset Plus flyfri elek
kr 3.820,-
+
-
3|3|553
184
Align T-rex 450LP er en komplet helikopterpakke fra Align med forudbygget T-Rex 450 med flyvefrit rotorhoved og tilhørende elektronik. 10-kanals computerradio, der er fuldt programmeret samt batteri og oplader. Helikopteren har kvalitetskomponenter,
(3)
kr 5.098,-
+
-
3|7|553
184
Align T-Rex 470LM. Helikopteren leveres som byggesæt og nødvendigt tilbehør er radio/modtager med 6+ kanaler og heli system, pitchmåler, kontakt til ESC, oplader og et 6s LiPo batteri 1400 - 1900 mAh.
(1)
kr 4.695,-
+
-
3|1|553
184
Tourqe kører versionen af 470L. Helikopteren leveres som kit, og nødvendigt tilbehør er radio / modtager med 6+ kanaler og heli-system, tonehøjde, ESC-kontakt, oplader og et 6s LiPo-batteri 1400 - 1900 mAh.
(1)
kr 4.650,-
+
-
3|1|553
184
Align T-Rex 500X Tourqe Drive-version, opdateret og raffineret. 500X leveres med et helt nyt FL-rotorhoved med ekstremt lavt tyngdepunkt, der giver mindre modstand under 3D-flyvning og samtidig øger lydhørhed og præcision.
(1)
kr 6.995,-
+
-
3|2|553
184
Den nye Align T-Rex 550X er et betydeligt spring fremad, den er primært lettere end sin forgænger og har en række innovative designændringer som f.eks. ny flybarfri rotor med ekstremt lav CG, dette giver reduceret modstand og øger respons og præcisi
(1)
kr 10.199,-
+
-
3|2|553
184
Align T-Rex 650X er en kraftig elektrisk helikopter med 65 cm hovedrotorblade, kraftfuld 800-motor ig esc til 12S LiPo. Pakken leveres med ekstreme børsteløse HV-servoer og Microbeast flybarless elektronik.
kr 9.560,-
+
-
3|1|553
184
Align T-Rex 760X kommer her i Top Combo med rigtig cool elektronik. Selve helikopteren leveres som et sæt, og den leveres med Hobbywing Platinum HV 200A ESC, Digital HV Servos og Aligns 850MX-motor.
kr 14.020,-
+
-
3|2|553
184
T-Rex 800E leveres nu med Hobbywing 200A-regulator, kraftfulde HV-servoer og en børsteløs 850MX 490KV-motor! Dette helium har også Microbeast Plus flybarless system. Alt du behøver er en radio og modtager, 2 6s LiPo batteri og en kompatibel oplader,
kr 14.980,-
+
-
3|1|553
184
Align T-Rex TB40 leveres her som et sæt. Selve helikopteren leveres som et byggesæt, hvor al elektronik er påkrævet.

BEMÆRK! Billederne vist på produktet er af Top Combo, der følger med al elektronik.
kr 2.550,-
+
-
3|4|553
184
Align T-Rex TB40 leveres her i Combo med virkelig kraftfuld elektronik. Selve helikopteren leveres som byggesæt og den kommer med 60A ESC, kraftige digitale servoer, Microbeast 2 Flybarless og Aligns 400MX motor.
kr 4.460,-
+
-
3|4|553
184
Align T-Rex TB60 leveres her i Combo med virkelig kraftfuld elektronik. Selve helikopteren leveres som byggesæt, og den kommer med 130A ESC, kraftige digitale servoer og Aligns 750MX-motor.
kr 10.840,-
+
-
3|4|553
184
-15%
Produktet er blevet åbnet og emballagen er i stykker. Selve varen er ubrugt.
kr 9.195,-
10836|10.836,-
+
-
3|1|1297
184
Align T-Rex TB60 leveres her i Combo med virkelig kraftfuld elektronik. Selve helikopteren leveres som byggesæt og den kommer med 150A ESC, kraftige digitale servoer, Microbeast 2 Flybarless og Aligns 750MX motor.
(1)
kr 10.840,-
+
-
3|3|553
184
Align T-Rex TB60 leveres her som et sæt. Selve helikopteren leveres som byggesæt, hvor al elektronik er nødvendig.
kr 5.395,-
+
-
3|1|553
184
Align T-Rex TB70 leveres her som et sæt. Selve helikopteren leveres som byggesæt, hvor al elektronik er påkrævet.
kr 7.650,-
+
-
0|0|553
184
Align T-Rex TB70 V2 leveres her i Top Combo med virkelig kraftfuld elektronik. Selve helikopteren leveres som byggesæt og den kommer med Hobbywing Platinum HV 200A ESC, kraftige digitale servoer og Aligns 800MX motor.
kr 13.387,-
+
-
3|4|553
184
Aligns mindste 3D-helikopter, perfekt til at flyve i hallen, baghaven eller haven. Modellen kommer med dual direct drive børsteløse motorer, T15G flight controller og mulighed for attitude Auto-Level flyvning! T15 har et setup, der er helt fantastis
kr 1.895,-
+
-
3|11|553
184
Align dens mindste 3D-helikopter, perfekt til at flyve i hallen, baghaven eller haven. Modellen kommer med dual direct drive børsteløse motorer, T15G flight controller og mulighed for attitude Auto-Level flyvning! T15 har et setup, der er helt fanta
kr 1.895,-
+
-
3|6|553
184
Aligns mindste 3D-helikopter, perfekt til at flyve i hallen, baghaven eller haven. Modellen kommer med dual direct drive børsteløse motorer, T15G flight controller og mulighed for attitude Auto-Level flyvning! T15 har et set-up, der er helt perfekt
kr 2.795,-
+
-
3|1|553
184
Aligns mindste 3D-helikopter, perfekt til at flyve i hallen, baghaven eller haven. Modellen kommer med dual direct drive børsteløse motorer, T15G flight controller og mulighed for attitude Auto-Level flyvning! T15 har et set-up, der er helt perfekt
kr 2.795,-
+
-
3|3|553
183
T-Rex 600XN Dominator Combo er en ny nitro-helikopter fra Align til 0,50-motoren. Dette har et barbarfrit rotorhoved med et 550 design, der giver helikopteren et lavere tyngdepunkt (CG), hvilket fører til øget præcision og respons. Koblingen er desi
kr 7.650,-
+
-
3|1|553
183
T-Rex 700XN Dominator Super Combo er en ny Nitro-helikopter fra Align. Dette har et 700x flyvebarfrit rotorhoved, der giver helikopteren et lavere tyngdepunkt (CG), hvilket fører til øget præcision og respons. Motorophæng er flyttet frem, så tanken
kr 10.840,-
+
-
3|1|553
183
Align TN70 leveres her som et sæt. Selve helikopteren leveres som byggesæt og den leveres med brændstoftank, 105 High Performance rør, blade og guvernørsensor.
kr 7.650,-
+
-
3|1|553
183
Align TN70 leveres her i Combo med virkelig kraftfuld elektronik. Selve helikopteren leveres som byggesæt, og den leveres med B6M 2i1 spændingsregulator combo, 105 High Performance pipe, OS. MAX-105HZ, 650cc brændstoftank, kraftige digitale servoer
kr 15.300,-
+
-
3|2|553
191
2 stk batteri til T-Rex 150. 300mAh.
kr 152,-
+
-
3|9|34
191
2s 360mAh - 50C - Align passer til T-Rex T15. Dette batteri leveres kun med et balanceringskabel, der bruges til opladning og flyvning.
kr 89,-
+
-
3|26|197
191
2s 400mAh - 50C - Align passer til T-Rex T15. Dette batteri leveres kun med et balanceringskabel, der bruges til opladning og flyvning. Denne pakke er 60 mah større end den originale T15.
kr 115,-
+
-
3|24|197
191
3s 850mAh - 50C - Align til T-Rex 250 JST
kr 109,-
+
-
3|22|313
191
3S 1150mAh LiPo batteri med XT30 batteristik.
kr 109,-
+
-
3|11|313
191
3S 1300mAh LiPo-batteri designet til brug med Align T-Rex 300. Kan også bruges sammen med andre modeller, hvor batteriet passer og har XT30-stik
(2)
kr 133,-
+
-
3|32|313
191
3S 1300mAh LiPo batteri lavet til brug i Aligns 250 quad. Kan også bruges til andre modeller, hvor batteriet passer.
kr 127,-
+
-
3|15|313
191
6S 1450mAh for eksempel T-Rex 450 Dominator med 6S layout. XH-afbalanceringsstik og batterikontakt af XT60-type.
(3)
kr 255,-
+
-
3|14|259
191
6S 2200mAh for eksempel T-Rex 470 med 6S opsætning. XH balancestik og XT60 batteristik.
kr 443,-
+
-
3|21|259
191
Modtager for at bruge din JR DMSS-radio mod Align T-REX 150 DFC, radio skal have XBUS-kapacitet. Dette kan også bruges på Aligns GPro-enhed og lignende. Ikke anbefalet til større helikoptere.
kr 279,-
+
-
3|3|34
191
Modtager med AFHDS for Align A10.
kr 286,-
+
-
3|1|121
191
2stk batterier for M424 Quad
kr 133,-
+
-
3|30|34
191
12V afgifter for 2s 250mah-pakkerne til Align T-REX 150 DFC. 0,5A opladning. Oplader 2 stk batterier på samme tid.
kr 172,-
+
-
3|1|909
191
USB-lader for 1S M424-batteri
kr 105,-
+
-
3|7|34
185
Align DS450, metaltransmissionsservo, f.eks. T-Rex 250 og 450 CCPM. Kan også bruges til elektriske fly eller lignende. Kan bruges på 6,0-8,4V spænding.
(3)
kr 275,-
+
-
3|2|617
185
Align DS450M, metaltransmissionsserve, for eksempel T-Rex 250 og 450 CCPM. Kan også bruges til elektriske fly eller lignende. Kan bruges på 6,0-8,4V spænding. M-varianten har et metalcylinderhoved.
kr 382,-
+
-
3|12|617
185
Align DS455, metaltransmissionsservo, for eksempel T-Rex 250 og 450 haledrift. Kan også bruges til elektriske fly eller lignende.
(1)
kr 279,-
+
-
3|7|617
185
Align DS455M, metaltransmissionsserve, f.eks. T-Rex 250 og 450 haleoperation. Kan også bruges til elektriske fly eller lignende.
(2)
kr 337,-
+
-
3|10|617
185
Align DS530 Digital Servo. Digital servo, der f.eks. Passer ind i Align T-Rex 500. Servoen er meget hurtig og kraftig og passer fint til ccpm-servoen på t-rex 500. Servoen har coreless motor, så den centrerer meget godt.
kr 446,-
+
-
3|6|617
185
Align DS535M Digital Servo er en ekstremt hurtig haleservo til helikoptere i størrelse 500. Kan bruges på spændinger fra 6,0-8,4V og bruges ved maksimal spænding 0,035sek / 60deg. Servoen har coreless motor, så den centrerer meget godt.
(2)
kr 415,-
+
-
3|7|617
185
Meget kraftig og præcis servo, der kan bruges til helikopterbytte, som styreservo på bil eller lignende applikationer som større fly. Servoen har metaludstyr og trækker i alt 12,8 kg i 0,07sek ved 6,0 V.
kr 573,-
+
-
3|6|617
185
Meget kraftig og præcis servo, der kan bruges til helikopterbytte, som styreservo på bil eller lignende applikationer som større fly. Servoen har metalhjul og trækker så meget som 10 kg i 0,07 sek ved 6,0 V. Servo er lavprofil for lettere installati
kr 573,-
+
-
3|7|617
185
Haleservo til helikopter, som er meget hurtig. Servo passer perfekt til helikopter i størrelse 500/550 og opad.
kr 573,-
+
-
3|5|617
185
-28%
Align DS820M er en ekstrem HV-servo til heli med CNC-kasse, metal gearkasse og børsteløs motor.
kr 826,-
1145|1.145,-
+
-
3|1|617
185
Align DS825M er en ekstrem HV-servo til heli-brug med CNC-kasse, metaludstyr og børsteløs motor.
(2)
kr 1.140,-
+
-
3|3|617
185
Align DS830M er en ekstrem HV-servo til elevatorservo (TB70) og elevator-/skeerroer/pitch-servo (TN70).
kr 1.270,-
+
-
3|3|617
185
Align DS835M er en ekstrem HV-servo til TB70/TN70 (ror).
kr 1.270,-
+
-
3|1|617
185
Use For T-Rex 150
4g digital micro servos are special design for T-REX 150 DFC, features to increase micro helicopter control speed and precision, let the micro/indoor helicopter has same flight performance as large/outdoor helicopter.
kr 127,-
+
-
3|3|34
185
HSD15008T T15 Digital Servo
kr 203,-
+
-
3|20|34
185
HSD15009T T15 Digital Elevator Servo
kr 203,-
+
-
3|7|34
185
DS155A er en digital servo på 4g som operer på 4,8-6V. Passer blant annet til T-Rex 150
kr 127,-
+
-
3|1|34
192
Align samarbejder med Microbeast, så her får du BeastX Microbeast Plus med ledningssæt leveret fra Align.
(2)
kr 1.400,-
+
-
3|2|296
192
Flybarless system designet til Aligns mindre helikopter. Passer til modellerne 250, 450, 470 og 500.
kr 699,-
+
-
0|0|296
192
-33%
Align T15 Flybarless System S-FHSS
kr 382,-
571|571,-
+
-
3|1|296
192
Align T15GA Flybarless System A.BUS
kr 635,-
+
-
3|1|296
192
Flybarless enhed til Align T-Rex 150X, kan bruges sammen med Spectrum satellitter DSMX og DSM2.
kr 382,-
+
-
3|2|296
192
Align Gyrotape-pakken indeholder 4 stykker tape og metalplade til hundrede vibrationer.
  • Metallisk antivibrationsplade x 1 (26x26x1mm)
  • Dobbeltsidet tape x 4 (24x24x2mm)

    Egnet til GP750 / GP780, Sådan fikseres 3G-gryo og Flybarless
  • kr 45,-
    +
    -
    3|6|68
    193
    Elektronisk toningsmåler til helikopter, måleren viser ændringen i antallet af grader i displayet, og på denne måde kan du nemt indstille tonehøjde både på flyveløs og flyveløs helikopter.

    Introduktion:
    Udviklet af RandD-teamet i Alig
    (3)
    kr 293,-
    +
    -
    3|11|130
    193
    En pakke med to små flasker gevindlim, grøn er den stærkeste og blå er den svageste. Brugt på skruer for at forhindre løsnelse.
    UK HOLDTITE er et berømt klæbevirksomhed, Align R48 (anaerobics holder) er et grønt hurtigt klæbemiddel med høj st
    kr 49,-
    +
    -
    3|18|241
    193
    En pakke med to små flasker trådlim, begge flasker er af den blå type som er den svageste teadlock. Bruges på skruer for at forhindre dem i at løsne sig.
    kr 45,-
    +
    -
    3|10|241
    193
    Strålende stropp grundet til batterier. Der er to stropper i pakken.
    kr 49,-
    +
    -
    3|1|130
    193
    Align Super Starter for Helicopter kommer i en praktisk lille kasse og lancerer let .90 helikoptermotorer i størrelse. Startmotoren er gearet, og man har brug for et 3-cellers LiPo-batteri til at drive det. Startmotoren har indikation af batterispæn
    (4)
    kr 1.270,-
    +
    -
    3|4|81
    193
    Align Super Starter til fly kommer i en praktisk lille kuffert og starter motorer op til 180-glød. Startmotoren er gearet, og man har brug for et 3-cellers LiPo-batteri til at drive det. Batteriet skal også have den type dekanstik, der passer til. K
    (2)
    kr 1.270,-
    +
    -
    0|0|81
    193
    Værktøj til spænding af links på heli.
    Til brug på T-REX 450/500/550/600/700/800.
    kr 45,-
    +
    -
    3|5|520
    193
    Her leverer Align 3 Umbraco jern i HSS stål. To af dem er 1,3 mm og den sidste er 0,9 mm. Anbefales til blandt andet T-Rex 250.
    (2)
    kr 165,-
    +
    -
    0|0|109
    193
    Kraftig umbracoset fra Align i HSS-kvalitet. Umbraco-spidserne er i 1.5. 2. 2,5, 3 og 4 mm.
    kr 235,-
    +
    -
    3|10|109
    193
    Kraftfuldt umbrasæt fra Align i HSS kvalitet. Umbraco-spidserne er i 1,5. 2. 2,5, 3 og 4 mm.
    (1)
    kr 275,-
    +
    -
    3|5|109
    193
    Specielt designet til 250 klasses helikoptere giver denne swashplate leveler mulighed for præcis justering af swashplate niveauet, hvilket forbedrer helikopternes hoverstabilitet og flyveydelse. Skræddersyet specielt til Juster swashplate-design ved
    kr 55,-
    +
    -
    3|1|520
    193
    Specielt designet til 450 helikoptere i klasse giver denne swashplate-nivellering mulighed for præcis justering af swashplate-niveauet, hvilket forbedrer helikopternes hoverstabilitet og flyveydelse. Skræddersyet specielt til Juster swashplate-desig
    kr 76,-
    +
    -
    3|4|520
    193
    Specielt designet til 500 helikoptere i klasse giver denne swashplate-niveller mulighed for præcis justering af swashplate-niveauet, hvilket forbedrer helikopternes hoverstabilitet og flyveydelse. Skræddersyet specielt til Juster swashplate-design v
    kr 82,-
    +
    -
    3|1|520
    193
    Startaksel til Align Super starter. Komplet med envejsleje og O-ring.
    (1)
    kr 223,-
    +
    -
    0|0|81
    193
    HFSSTQ04T Start adapter til fly. Køb dette sammen med den justerede helikopterstarter for at have mulighed for også at starte fly.
    (2)
    kr 255,-
    +
    -
    3|4|81
    193
    Starter shaft til Align Super starter
    kr 125,-
    +
    -
    3|3|34
    193
    Fjedrende skruenøgle til T-REX 470 & 700
    (1)
    kr 159,-
    +
    -
    3|3|109
    193
    HZ024T hexagon skruetrækker (4 stk)
  • 1,5 mm (sort / 26,6 g) x1
  • 2,0 mm (blå / 28,6 g) x1
  • 2,5 mm (lilla / 29,5 g) x1
  • 3,0 mm (rød / 31 g) x1
  • kr 189,-
    +
    -
    3|12|109
    193
    K10273TA One Way Bearing fjernelsesværktøj.
    Fremragende værktøj til nem montering og adskillelse af envejsleje i hoveddrevet på TRex450 og Bælte CP.
    kr 36,-
    +
    -
    3|2|520
    193
    Balance med 3 mm stang. Kan bruges til at afbalancere hovedrotorvinger, halerotorvinger med nav og propeller, der har 3 mm huller.
    kr 56,-
    +
    -
    3|5|168
    193
    Tang for let at komme af fra kuglen på helikopter. Passer til 500-størrelser opad.
    (1)
    kr 185,-
    +
    -
    3|10|520
    196
    Passer Juster 150 og 150X.
    kr 115,-
    +
    -
    3|2|288
    196
    HC1521T T15 Painted Canopy - Blue
    kr 185,-
    +
    -
    3|2|34
    196
    HC1522T T15 Painted Canopy - Yellow
    kr 165,-
    +
    -
    3|13|34
    196
    HC3001T 300X malet baldakin
    kr 195,-
    +
    -
    3|2|288
    196
    HC4356T 450L Dominator Painted Canopy
    kr 252,-
    +
    -
    3|3|577
    196
    HC4357T 450L Dominator Painted Canopy
    kr 299,-
    +
    -
    3|1|577
    196
    HC4703T 470L malet baldakin
    kr 319,-
    +
    -
    3|1|577
    196
    HC4705T 470L malet baldakin
    kr 286,-
    +
    -
    3|2|577
    196
    Use for T-REX 500
    kr 326,-
    +
    -
    0|0|34
    196
    Til T-REX 500X / 500L
    kr 415,-
    +
    -
    3|1|578
    196
    Use for T-REX 550X/550L.
    kr 479,-
    +
    -
    3|2|34
    196
    Use for T-REX 550X/550L.
    kr 509,-
    +
    -
    3|2|34
    196
    HC6183T 600XN Painted Canopy-Yellow
    kr 473,-
    +
    -
    3|2|34
    196
    HC6184T 600XN Painted Canopy-Green
    kr 473,-
    +
    -
    3|2|34
    196
    HC6513T 650X Painted Canopy passer til T-Rex 650X
    kr 569,-
    +
    -
    3|1|34
    196
    HC6603T 600E Pro Painted Canopy
    kr 529,-
    +
    -
    3|1|34
    196
    HC7659T 760X malet baldakin
    kr 699,-
    +
    -
    3|1|581
    196
    HC7663T 700X malet baldakin til T-Rex 700E / 700L / 700X.
    kr 635,-
    +
    -
    3|2|581
    196
    HCB6001T TB60 malet baldakin - Orange
    kr 635,-
    +
    -
    3|1|288
    196
    HCB6002 TB60 Malet Baldakin - Blå
    (1)
    kr 635,-
    +
    -
    3|1|288
    196
    HCB7005 TB70 Malet Baldakin - Orange
    kr 796,-
    +
    -
    3|1|288
    196
    HQ0850CT 85 mm kulfiberhaleblad passer til T-Rex 550.
    kr 179,-
    +
    -
    3|3|132
    200
    Ansøg om ALIGN 55H-motor. Passer også til os 55HZ helikopter.
  • 55H Kølepakning med køleplade x1
  • kr 15,-
    +
    -
    3|2|167
    200
    Ansøg om ALIGN 55H-motor. Passer også til os 55HZ helikopter.
  • 55H dækpakning x1
  • kr 15,-
    +
    -
    3|7|167
    189
    100A regulator 3-6S til helikopter i størrelse 500-600 og andre applikationer, meget justerbar BEC !.
    kr 1.270,-
    +
    -
    3|2|195
    189
    130A ventilator 6-12S med ventilator, til helikopter i størrelse 600-800 og andre applikationer, meget justerbar BEC !.
    kr 2.395,-
    +
    -
    0|0|195
    189
    50A regulator, 2-6s LiPo med Governer-tilstand.
    kr 399,-
    +
    -
    0|0|195
    189
    Align 80A ESC 2-6s m/BEC
    kr 826,-
    +
    -
    3|2|195
    189
    Spændingsregulator for brændstofhelikopter. Bruges med 2s LiPo / Life Input, og controlleren har 2 udgange. Den ene udgang giver 1,5 V og forbindes til glødestikket, og den anden giver 7,4V til modtageren. Sørg for, at servoen kan modstå 7.4V.
    kr 573,-
    +
    -
    3|2|150
    189
    HEG15013T T15 Brushless ESC leveres med skruer og dobbelsidig tape.
    kr 286,-
    +
    -
    3|2|34
    189
    HEGBP002T BeastX Governor Sensor er designet for bruk på TN70 / T-REX 600N / T-REX 700N.
    kr 109,-
    +
    -
    3|9|34
    189
    Suitable for M480L / M690L.
    Features a high luminous LED for flight orientation. The LED color and motor rotate direction can be switched between red and white based on needs, as well as provide low voltage warnings.
    kr 413,-
    +
    -
    3|4|34
    189
    Oppgradert fra sin forgjenger, denne ESC-kontrolleren har innebygd BEC-spenningsinnstilling, er mye kraftigere og mer presis. Dessuten bruker den en høykvalitets 32-biters M4 AMR-prosessor og har overlegen regulator-ytelse, og støtter den beste flyp
    kr 555,-
    +
    -
    3|1|34
    189
    Børsteløs fartsregulator til T-Rex 250 med governor funksjon. Kan også brukes på fly og lignende.
    kr 379,-
    +
    -
    3|1|34
    189
    50A børsteløs hastighedskontrol til helikopter. Passer til en helikopter i størrelse 450-470 med 3-6S LiPo.
    kr 489,-
    +
    -
    3|3|195
    189
    HML15M03T 150M Main Motor Set (9000KV/1107)
    kr 185,-
    +
    -
    3|2|34
    189
    HML15M11T T15 Tail Motor Assembly 2405 1500KV
    kr 329,-
    +
    -
    3|2|34
    189
    HML46M02T 460MX børsteløs motor (3200KV)
    kr 446,-
    +
    -
    3|1|237
    189
    HML47M01T 470MX børsteløs motor (1800KV)
    kr 479,-
    +
    -
    3|1|237
    189
    Børsteløs motor til 500X / 500L
    kr 635,-
    +
    -
    3|1|237
    189
    HML73M02T 730MX børsteløs motor (960KV / 4230)
    kr 953,-
    +
    -
    3|1|34
    189
    Rå børsteløs helikoptermotor fra Align. Passer til T-Rex TB60, samt andre helikoptere der har plads til denne type motorer.
    kr 1.180,-
    +
    -
    0|0|237
    189
    Rå børsteløs helikoptermotor fra Align. Passer til T-Rex TB60 (6S version), samt andre helikoptere der har plads til denne type motor.
    kr 1.140,-
    +
    -
    3|1|237
    189
    Rå børsteløs helikoptermotor fra Align. Kan yde kontinuerlige 4,4kw og passer i T-Rex 700 og 800, samt andre helikoptere der har plads til denne type motor.
    kr 1.591,-
    +
    -
    3|1|237
    187
    Align håndklæde: Dimension: 75x48cm
    kr 62,-
    +
    -
    3|1|86
    197
    HB40H001XXT Main Rotor Housing Set - TB40
    kr 165,-
    +
    -
    3|1|34
    197
    HD120BT T15 Carbon Fiber Hovedblade
    kr 127,-
    +
    -
    3|8|131
    197
    230 mm carbonfiberblad til T-Rex 300X og lignende modeller.
    (1)
    kr 139,-
    +
    -
    3|7|131
    197
    325 mm carbonfiberblad til 450bar flybar helikopter 325 3K carbonfiber hovedblader er designet specielt til ekstrem 3D-flyvning med både høj smidighed og fremragende stabilitetsegenskaber. Bladene har helt nyt airfoil-design kombineret med ny malet
    (1)
    kr 149,-
    +
    -
    3|3|131
    197
    325 mm carbonfiberblad til 450bar flybar helikopter 325 3K carbonfiber hovedblader er designet specielt til ekstrem 3D-flyvning med både høj smidighed og fremragende stabilitetsegenskaber. Bladene har helt nyt airfoil-design kombineret med ny malet
    (5)
    kr 137,-
    +
    -
    3|4|131
    197
    360 mm klinger til blandt andet T-Rex 450L dominator 6S og andre helikoptere, der kan bruge denne størrelse klinger.
    (1)
    kr 152,-
    +
    -
    3|6|131
    197
    360 mm klinger til blandt andet T-Rex 450L dominator 6S og andre helikoptere, der kan bruge denne størrelse klinger.
    (1)
    kr 143,-
    +
    -
    3|3|131
    197
    HD380AT 380 carbonfiberklinger. 380mm carbonfiberblad til T-Rex 470L
    kr 159,-
    +
    -
    3|8|131
    197
    Brug til T-REX 470L. 380 3G-hovedbladene er designet specielt til ekstrem 3D-flyvning med både høj smidighed og fremragende stabilitetsegenskaber. Bladene har helt nyt airfoil-design kombineret med ny malet grafik. Derudover er knivstivheden blevet
    kr 165,-
    +
    -
    3|5|131
    197
    425mm carbon blade til flybarfri udgave af T-Rex 500 og andre lignende helikoptere.
    425 3K carbonfiber hovedblader er designet specielt til ekstrem 3D-flyvning med både høj smidighed og fremragende stabilitetskarakteristika. Bladene har helt
    kr 216,-
    +
    -
    0|0|131
    197
    425mm carbon blade til flybarfri udgave af T-Rex 500 og andre lignende helikoptere.
    425 carbon fiber Composites hovedblader er designet specielt til ekstrem 3D-flyvning, med både høj smidighed og fremragende stabilitetskarakteristika. Bladene
    (1)
    kr 189,-
    +
    -
    3|3|131
    197
    HD420KT 425 mm kulfiberblade - Sort passer til Trex 500.
    kr 216,-
    +
    -
    3|3|131
    197
    470 mm carbonfiberblad til T-Rex 500X.
    (1)
    kr 269,-
    +
    -
    3|5|131
    197
    Kulblad til brug på Align T-Rex 550E og lignende helikoptere.
    kr 433,-
    +
    -
    0|0|131
    197
    HD520DT Hvedeblade til 3 bladrotorhoved.
    kr 699,-
    +
    -
    3|1|131
    197
    Kulfiberblad til T-Rex 550, som er 55 cm lange. Bladene er lavet til helikoptere, der har en 4 mm bolt, og de har en 12 mm tykkelse inde i roden.
    kr 539,-
    +
    -
    3|2|131
    197
    230 mm kulfiberblade til Align T-Rex 550X, Align T-Rex 600 Electric, Align T-Rex 600 Nitro, Align T-Rex 600E Pro, Align T-Rex 600L Dominator, Align T-Rex 600XN og Align TB6 T-R
    (1)
    kr 509,-
    +
    -
    3|4|131
    197
    60 cm kulstofrotorblade til helikoptere i størrelse 50/600.
    600 3G-hovedbladerne er specielt designet til ekstrem 3D-flyvning med både høj smidighed og fremragende stabilitetsegenskaber. Bladene har helt nyt airfoil-design kombineret med ny m
    kr 635,-
    +
    -
    3|1|131
    197
    Carbon fiber blade til T-Rex 600N / 600XN. Specielt udviklet til brug på Nitro helikopter.
    kr 635,-
    +
    -
    3|4|131
    197
    -33%
    Kulfiberblade til T-Rex 650X i gul.
    kr 509,-
    762|762,-
    +
    -
    3|2|131
    197
    Kulfiberblade til T-Rex 650X.
    kr 719,-
    +
    -
    3|4|131
    197
    Carbon rotorblade med nogle kosmetiske afskrabninger, i kanten af logoet og lignende. Påvirker ikke flyveegenskaberne. Passer til .90 størrelse og 700 størrelse helikopter. 14mm tykkelse i rotorholder.
    kr 635,-
    +
    -
    3|42|131
    197
    70 cm kulstofrotorvinger til .90 flyvbare 3D-masker i størrelse. 14 mm rod med 5 mm diameter bolthul.
    700 3G-hovedbladerne er specielt designet til ekstrem 3D-flyvning med både høj smidighed og fremragende stabilitetsegenskaber. Bladene har h
    (1)
    kr 826,-
    +
    -
    3|4|131
    197
    Brug til T-REX 760X. Nye udvidede 760 carbonfiber-hovedblader forbedrer effektivt flyvestabilitet og effektydelse. Forøg styrken til bedre kontrol og omdefiner din flyveoplevelse. Og den indeholder ny airfolie og trykt grafik, øget stivhed og forlæn
    kr 1.140,-
    +
    -
    0|0|131
    197
    78 cm carbonrotorblade til blandt andet T-Rex 800E. 14 mm rod med 5 mm diameter bolthul.
    kr 995,-
    +
    -
    3|3|131
    197
    80 cm klinger til brug med for eksempel T-Rex 800 og T-Rex 700, som har forlænget hale med 800-halers opgraderingssæt
    kr 953,-
    +
    -
    0|0|131
    197
    Passer til Align T15. Pakken inneholder 4stk 2-blade tail blades.
    kr 63,-
    +
    -
    3|13|34
    197
    Brug til T-REX 450L / 470L.
    kr 59,-
    +
    -
    3|3|132
    197
    Brug til T-REX 450L / 470L. Nyt letvægtsdesign, forbedrer effektiviteten af halebladet for at gøre mere præcision på haleborens kontrol.
    kr 62,-
    +
    -
    3|2|132
    197
    HQ0700DT 70mm Carbon Fiber Tail Blade.
    kr 153,-
    +
    -
    3|5|34
    197
    HQ0703AT 70 Carbon Fiber Tail Blade - TB40
    kr 73,-
    +
    -
    3|2|34
    197
    Passer til 550E Three Blade Set. HQ0950DT 95mm kulfiberhaleblade. 3 stk i pakken. Let designet med 3K kulfiber.
    kr 255,-
    +
    -
    3|2|132
    197
    HQ0950ET TB60 kulfiber haleblade gul
    kr 229,-
    +
    -
    3|4|131
    197
    Passer til T-REX TB70, T-REX 650/700.
    (1)
    kr 215,-
    +
    -
    0|0|132
    197
    HQ1050HT 105 mm kulfiberhaleblade (3). Designet letvægts med 3K kulfiber.
    kr 277,-
    +
    -
    3|1|132
    197
    Passer til T-REX 800. Let designet med 3K kulfiber.
    kr 345,-
    +
    -
    3|4|132
    496
    HEG00003T Mini A.Bus Mottaker for A10-radio. 14 kanaler og tpler innspenning på 4-8.4V. Dimensjoner: 20x15.2x5.3mm.
    kr 219,-
    +
    -
    3|1|34
    496
    HEPBP301T Microbeast Bluetooth Smart Interface
    kr 446,-
    +
    -
    3|3|34
    198
    Plastinnlegg til metall hoved- og halebladgriper. Desse gir større kontaktflate mellom blad og bladgriper, og gir stivere holdekraft og forhindrer også skrap på rotorbladene.
    kr 49,-
    +
    -
    3|2|34
    198
    Skruesæt til T-Rex 250-500.
    Egnet til alle maskiner i 250 klasse.
    Egnet til alle maskiner i 450 klasse.
    Egnet til alle 500 klasse maskiner.
    (2)
    kr 149,-
    +
    -
    3|4|363
    198
    Plastinnlegg til metall hoved- og halebladgriper. Desse gir større kontaktflate mellom blad og bladgriper, og gir stivere holdekraft og forhindrer også skrap på rotorbladene.
    kr 67,-
    +
    -
    3|3|34
    198
    Plastinnlegg til metall halebladgriper. Desse gir større kontaktflate mellom blad og bladgriper, og gir stivere holdekraft og forhindrer også skrap på rotorbladene.
    kr 49,-
    +
    -
    3|8|34
    198
    Use for T-REX 500L.
    kr 136,-
    +
    -
    3|2|34
    198
    Plastinnlegg til metall hoved- og halebladgriper. Desse gir større kontaktflate mellom blad og bladgriper, og gir stivere holdekraft og forhindrer også skrap på rotorbladene.
    kr 67,-
    +
    -
    0|0|34
    198
    700FL main shaft, 2stk. Se bilde for informasjon om lengde. (Erstatter H70035)
    kr 189,-
    +
    -
    3|1|34
    198
    H7NG001BXT M1 TorqueTube Front Drive Gear Set/21T
    kr 126,-
    +
    -
    3|6|34
    198
    HSP15002T Align DS150Upper/Lower Cover
    kr 32,-
    +
    -
    3|4|34
    198
    HSP15501T Align DS155 Upper/Lower Cover
    kr 29,-
    +
    -
    3|1|34
    198
    Egnet til servoer i ALIGN DS410 / DS420 / DS410M-serien
    kr 45,-
    +
    -
    3|5|161
    198
    Plastisk drev til Align DS410 servo
    kr 32,-
    +
    -
    3|9|34
    198
    -80%
    Gear sæt til Align DS420
    kr 9,-
    44|44,-
    +
    -
    3|2|105
    198
    Velegnet til servoer i ALIGN DS4-serien.
    kr 45,-
    +
    -
    3|2|161
    198
    Use for ALIGN DS416M Servo
    kr 24,-
    +
    -
    3|9|34
    198
    Use for ALIGN DS430M Servo
    kr 24,-
    +
    -
    3|10|34
    198
    HSP45002T DS450 Servo Gear Set
    (2)
    kr 139,-
    +
    -
    3|2|105
    198
    -78%
    Reservedel til Align DS510, 520 og 510M servo.
    kr 6,-
    27|27,-
    +
    -
    3|9|363
    198
    HSP61015QRT D6FF Metal Servo Horn (M2.5) - Rød (3)
    kr 226,-
    +
    -
    3|2|161
    198
    Use for ALIGN DS615S Servo
    kr 152,-
    +
    -
    3|1|34
    198
    Use for ALIGN DS615S Servo
    kr 29,-
    +
    -
    3|10|34
    195
    Assistent til at få spindel på T-Rex 550, 600 og 700 eller enhver anden helikopter med spindelaksel på 8 mm eller 10 mm.

    6061-T6 Aluminiumlegeringsmateriale og CNC behandlet
  • Brug på T-REX 550 / 600/700.
  • (1)
    kr 176,-
    +
    -
    3|4|109
    409
    HEG15003T 150X Brushless ESC
    kr 255,-
    +
    -
    3|1|34
    188
    2 stk originalbatteri til T-Rex 100
    kr 133,-
    +
    -
    3|1|34
    188
    Sender for å styre Align T-Rex 100X med IPhone.
  • ALIGN A5 transmitter attachment is developed for smart phone (iPhone, iPad, iPod touch) to control TREX-100 and ALIGN Flight app need to be installed on your smart phone.
  • ALIGN Flight is the cont
  • kr 149,-
    +
    -
    3|6|34
    188
    Works as an individual equipment to set the ESC, each programmable option is displayed on LCD screen allow for easy setup. Works as an USB adapter to link the ESC with PC to update the ESC firmware or set the parameter by the USB Link Software on PC
    kr 349,-
    +
    -
    3|2|34
    188
    Kabel til T-Rex 100X sender. Monosimulatorkabel til FMS.
    kr 67,-
    +
    -
    3|5|36
    188
    B01015TA Motor Bearings (R2-52ZZ)
    kr 45,-
    +
    -
    3|4|34
    188
    D03773T T-Rex SE sticker
    kr 29,-
    +
    -
    3|4|34
    188
    Use for T-REX 100.
  • Blue main shaft(H11007A) is used with T1.4x7mm Screw.Fasten it from the bigger hole on the main shaft mount.
  • Red main shaft(H11007) is used with T1.4x2.5mm Screw.Fasten it from the smaller hole on the main shaft mount.
  • kr 49,-
    +
    -
    3|15|34
    188
    H11006AT 100X Flybar Rod Assembly
    kr 55,-
    +
    -
    3|6|34
    188
    6061-T6 Aluminum alloy material and CNC processed
  • Use for T-REX 100.
  • Must with:100 Rotor Housing(H11005A)or 100 Metal Re-fitting Components(H11025A).
  • kr 35,-
    +
    -
    3|14|34
    188
    H11007T 100 Main Motor Set
    kr 35,-
    +
    -
    3|29|34
    188
    H11008T 100 Swashplate
    kr 52,-
    +
    -
    3|10|34
    188
    H11009T 100 Main Frame Set
    kr 49,-
    +
    -
    3|6|34
    188
    H11010T 100 Landing Skid
    kr 59,-
    +
    -
    3|5|34
    188
    H11012T 100 Main Motor Set
    kr 55,-
    +
    -
    3|2|34
    188
    Use for T-REX 100S/100X.
    kr 25,-
    +
    -
    3|11|34
    188
    100X Complete Tail Assembly
    kr 79,-
    +
    -
    3|3|34
    188
    H11019T 100 Linkages
    kr 33,-
    +
    -
    3|4|34
    188
    100 Screw Parts
    kr 25,-
    +
    -
    3|21|34
    188
    H11020T 100 Screw Parts
    kr 25,-
    +
    -
    3|18|34
    188
    H11021T H63 Bearing 3x6x2 2stk
    kr 35,-
    +
    -
    3|2|34
    188
    Use for T-REX 100S/100X
    kr 245,-
    +
    -
    3|1|34
    188
    Upgrades til T-Rex 100
    kr 229,-
    +
    -
    3|11|34
    188
    Use for T-Rex 100
    kr 35,-
    +
    -
    3|4|34
    188
    Use For T-Rex 150
    kr 119,-
    +
    -
    3|1|34
    188
    Use For T-Rex 150
    kr 95,-
    +
    -
    3|6|34
    188
    H15B006XXT T15 Main Frame - Upper
    kr 125,-
    +
    -
    3|4|34
    188
    Passer til Align T15.
    kr 49,-
    +
    -
    3|3|34
    188
    H15B008XXT T15 Main Frame - Lower
    kr 63,-
    +
    -
    3|4|34
    188
    Use For T-Rex 150
    kr 89,-
    +
    -
    3|2|34
    188
    Use For T-Rex 150
    kr 79,-
    +
    -
    3|4|34
    188
    Passer til Align T15. Pakken inneholder 2stk skids.
    kr 89,-
    +
    -
    3|4|34
    188
    Use For T-Rex 150
    Brand new design of 78T main gear for T-REX 150, features solid structure, it can be increase the gear torsion strength to avoid deform under high speed rotation.
    kr 69,-
    +
    -
    3|3|34
    188
    H15H001AXT 150 Main Rotor Housing
    kr 79,-
    +
    -
    3|1|34
    188
    6061-T6 Aluminum alloy material and CNC processed.
    Use for Use for T-REX 150.
    kr 73,-
    +
    -
    3|7|34
    188
    6061-T6 Aluminum alloy material and CNC processed.
    Use for Use for T-REX 150.
    kr 149,-
    +
    -
    3|1|34
    188
    Use For T-Rex 150
    kr 77,-
    +
    -
    3|6|34
    188
    Use for T-REX 150.
    Stainless steel material. This high strength and high rigidity characteristics.
    kr 59,-
    +
    -
    3|3|34
    188
    V2-versjon av swashplaten til T-Rex 150. Her er det nedre kulelageret bedre kapslet inne slik at det swashplaten ikke kan dele seg.
    kr 82,-
    +
    -
    3|1|34
    188
    Use for Use for T-REX 150.
    Ultra-high hardness foam, high wear resistance, makes your blades more stable.
    kr 29,-
    +
    -
    3|17|34
    188
    H15H009AXT 150 CCPM Metal Swashplate
    kr 189,-
    +
    -
    3|2|34
    188
    Verktøy for å kunne sette opp swashplaten helt i vater på T-rex 150.
    kr 49,-
    +
    -
    3|4|34
    188
    H15H011XXT 150 Head Damper
    kr 35,-
    +
    -
    3|6|34
    188
    H15H013XXT 150 Main Rotor Holder Upgrade Set
    kr 129,-
    +
    -
    0|0|34
    188
    H15H014XXT 150 Main Shaft
    kr 57,-
    +
    -
    3|8|34
    188
    H15H015XXT 150 Main Rotor Holder
    kr 137,-
    +
    -
    3|1|34
    188
    Passer til Align T15.
    kr 115,-
    +
    -
    3|4|34
    188
    H15H022XXT T15 Main Rotor Holder
    kr 219,-
    +
    -
    3|4|34
    188
    Passer til Align T15.
    kr 69,-
    +
    -
    3|15|34
    188
    H15H024XXT T15 Head Damper innholder 8stk dampers og 2stk washers.
    kr 49,-
    +
    -
    3|3|34
    188
    H15H025XXT T15 Main Shaft (2)
    kr 95,-
    +
    -
    3|16|34
    188
    H15H026XXT T15 CCPM Metal Swashplate
    kr 216,-
    +
    -
    3|2|34
    188
    H15H027XXT T15 Linkage Rod Set
    kr 99,-
    +
    -
    3|3|34
    188
    H15H028XXT T15 Main Blade Holder
    kr 45,-
    +
    -
    3|4|34
    188
    Use for 150 Main Rotor Holder (H15H002XXT)
    kr 63,-
    +
    -
    3|3|34
    188
    Use For T-Rex 150
    kr 52,-
    +
    -
    3|2|34
    188
    Use for T-REX 150.
    kr 62,-
    +
    -
    3|1|34
    188
    Use for T-REX 150.
    6061-T6 Aluminum alloy material.
    kr 59,-
    +
    -
    3|4|34
    188
    Use for T-REX 150.
    6061-T6 Aluminum alloy material.
    kr 53,-
    +
    -
    3|2|34
    188
    Use for T-REX 150.
    6061-T6 Aluminum alloy material.
    kr 57,-
    +
    -
    3|9|34
    188
    Oppgraderingsdel for T-Rex 150, her får man bakre motorfeste i aluminium, samt karbon kalefinne.
    kr 99,-
    +
    -
    3|2|34
    188
    Passer til Align T15.
    kr 59,-
    +
    -
    3|16|34
    188
    H15T012XXT T15 Tail Motor Mount
    kr 63,-
    +
    -
    3|5|34
    188
    Use For T-Rex 150
    kr 65,-
    +
    -
    3|6|34
    188
    H15Z006XXT T15 Screw Set
    kr 39,-
    +
    -
    3|4|34
    188
  • Hexagonal screw hole 1.3mm
  • Metal head stopper x 1
  • Socket button head screw x 1(0#x4mm)
  • kr 22,-
    +
    -
    3|7|34
    188
    H25005T-00 Metal Head Stopper Black
    kr 22,-
    +
    -
    3|9|34
    188
  • Hexagonal screw hole 1.3mm
  • Metal flybar seesaw holder x 1
  • Bearing 681X x 4(F1.5xF4x1.2mm)
  • Socket Button Head Collar Screw x 2(0#x4mm)
  • kr 89,-
    +
    -
    3|3|34
    188
    H25009T Flybar Rod/152mm
    kr 27,-
    +
    -
    3|3|34
    188
    H25010T Metal Washout Base
    kr 43,-
    +
    -
    3|10|34
    188
    H25012TA Radius Arm
    kr 25,-
    +
    -
    3|12|34
    188
  • Hexagonal screw hole 1.3mm
  • Metal SF mixing arm x 2
  • Socket button head screw x 2(0#x6mm)
  • Linkage ball A(0#x2) x 4(F3.5x5.3mm)
  • Bearing 681X x 2(F1.5xF4x1.2mm)
  • Bearing 681ZZ x 2(F1.5xF4x2mm)
  • Washer x 2(F1.5xF3x0.5mm)
  • kr 83,-
    +
    -
    3|2|34
    188
  • Hexagonal screw hole 1.3mm
  • Metal SF mixing arm x 2
  • Socket button head screw x 2(0#x6mm)
  • Linkage ball A(0#x2) x 4(F3.5x5.3mm)
  • Bearing 681X x 2(F1.5xF4x1.2mm)
  • Bearing 681ZZ x 2(F1.5xF4x2mm)
  • Washer x 2(F1.5xF3x0.5mm)
  • kr 92,-
    +
    -
    3|2|34
    188
    H25015T Feathering Shaft
    kr 49,-
    +
    -
    3|1|34
    188
    H25018T One-way Bearing
    kr 69,-
    +
    -
    3|1|34
    188
    H25022T Tail Boom Brace
    kr 35,-
    +
    -
    3|1|34
    188
    H25023T Rudder Servo Mount
    kr 25,-
    +
    -
    3|7|34
    188
    Use for T-REX 250/SE/PRO.
    6061-T6 Aluminum alloy material and CNC processed.
    kr 169,-
    +
    -
    3|11|34
    188
    H25027T Tail Shaft Slide Bush
    kr 29,-
    +
    -
    3|5|34
    188
    H25028T Tail Drive Belt
    kr 36,-
    +
    -
    3|2|34
    188
    H25030T-00 Tail Boom/Black
    kr 55,-
    +
    -
    3|1|34
    188
    H25031T Stabilizer
    kr 97,-
    +
    -
    3|2|34
    188
    H25032T Stabilizer Mount
    kr 66,-
    +
    -
    3|5|34
    188
  • H25033TA Hardware Bag
  • Hexagonal screw hole 1.3mm
  • Socket screw x 2(M2x5mm)
  • Stainless steel socket screw x 2(M2x8mm)
  • Socket button head screw x 23(0#x3mm)
  • Socket button head screw x 13(0#x4mm)
  • Socket button head screw x 9(0#x5mm)
  • kr 95,-
    +
    -
    3|3|34
    188
    H25034T Landing Skid
    kr 63,-
    +
    -
    3|2|34
    188
    H25035T Motor Mount
    kr 69,-
    +
    -
    3|8|34
    188
    H25036T Ball Link
    kr 45,-
    +
    -
    3|3|34
    188
    H25037AT Landing Skid Nut Black
    kr 29,-
    +
    -
    3|8|34
    188
    H25037T Landing Skid Nut
    kr 17,-
    +
    -
    3|1|34
    188
  • Damper rubber-black 75° x 2(F2.5xF5x2.6mm)
  • kr 25,-
    +
    -
    3|1|34
    188
    H25039T Canopy Mounting Bolt
    kr 49,-
    +
    -
    3|3|34
    188
    H25039TA Canopy Mounting Bolt
    kr 45,-
    +
    -
    3|1|34
    188
    H25040T Canopy Nut
    kr 39,-
    +
    -
    3|3|34
    188
    H25042T Aluminum Hexagonal Bolt
    kr 55,-
    +
    -
    3|9|34
    188
    H25043T Frame Hardware
    kr 35,-
    +
    -
    3|12|34
    188
    Use for T-REX 250/250SE.
    kr 35,-
    +
    -
    3|4|34
    188
    H25049T Motor Pinion Gear 16
    kr 47,-
    +
    -
    3|1|34
    188
    Use for T-REX 250/SE/PRO
    kr 76,-
    +
    -
    3|2|34
    188
    H25053T Gyro Mount
    kr 46,-
    +
    -
    3|13|34
    188
    H25055TA Stainles Steel Linkage Ball
    kr 77,-
    +
    -
    3|2|34
    188
    H25056T Ball Link A-B
    kr 35,-
    +
    -
    3|16|34
    188
    H25057T Stainless Steel Linkage Rod
    kr 29,-
    +
    -
    3|11|34
    188
    H25058T Bearings(682XZZ)
    kr 49,-
    +
    -
    3|2|34
    188
    H25059T Bearings(MR74ZZ-d3.5)
    kr 45,-
    +
    -
    3|2|34
    188
    H25060T Bearings(681X)
    kr 27,-
    +
    -
    3|4|34
    188
    H25061T Bearings(MR63ZZ)
    kr 29,-
    +
    -
    3|11|34
    188
    H25062T-1 Tail Rotor Control Arm Set
  • Extended rudder control arm to increase travel range and control resolution.In addition, the increased leverage minimizes the load on rudder servo, allowing the tail to hold with higher precision.
  • kr 35,-
    +
    -
    3|9|34
    188
    H25063T Tail Drive Gear Mount Set
    kr 69,-
    +
    -
    3|11|34
    188
    H25069 Blade Balancer 2mm
    kr 42,-
    +
    -
    3|26|34
    188
    H25070T 250 Ball Link Plier
    kr 59,-
    +
    -
    3|2|34
    188
    H25073T Landing Skid
    kr 49,-
    +
    -
    0|0|34
    188
    H25074TA Tail Rotor Hub Set
    kr 59,-
    +
    -
    3|3|34
    188
    H25075T Metal Tail Rotor Shaft Assembly
    kr 59,-
    +
    -
    3|10|34
    188
    H25076T Metal Rudder Servo Mount
    kr 69,-
    +
    -
    3|20|34
    188
    H25077T Metal Main Shaft Bearing Block
    kr 109,-
    +
    -
    3|2|34
    188
    H25079T Metal Tail Drive Gear Assembly
    kr 59,-
    +
    -
    3|4|34
    188
    H25080T Philips Screw Driver
    kr 36,-
    +
    -
    3|5|34
    188
    H25082T Bearings(681ZZ)
    kr 29,-
    +
    -
    3|11|34
    188
    H25091T Carbon fiber tail boom x 1(F7.7xF8.5x241)
    kr 79,-
    +
    -
    3|9|34
    188
    H25092T Metal Tail Rotor Control Arm Set
    kr 69,-
    +
    -
    3|5|34
    188
    H25094T Metal Tail Boom Mount
  • Metal tail boom mount(Left) x 1
  • Metal tail boom mount(Right) x 1
  • Hex mounting bolt x 4(2.2x14mm)
  • Socket button head screw x 8(0#x4mm)
  • kr 89,-
    +
    -
    3|4|34
    188
    H25096T Main Drive Gear Complete
  • New main drive gear(120T)
  • Main gear case x 1
  • Bearing 683 x 1(F3xF7x2mm)
  • One-way bearing HF0306 x 1(F3xF6.5x6mm)
  • Cross screw x 4(T1.5x4mm)
  • Space x 1(F3xF4.8x0.5mm)
  • kr 95,-
    +
    -
    3|1|34
    188
    H25097T Main Drive Gear 120T x 2
  • New main drive gear(120T) x 2
  • kr 55,-
    +
    -
    3|4|34
    188
    Hjelpemiddel slik at man kan montere flybar på flybarlesshodet til T-rex 250. Dette for å lettere kunne måle pitch
    Use for T-REX 250 3G Programmable Flybarless System
  • Pitch Gauge x 1
  • Socket button head screw(0#x4mm80 thread) x 1
  • kr 45,-
    +
    -
    3|3|34
    188
    Use for T-REX 250 3G Programmable Flybarless System
  • Arm O x 2
  • Ball Link x 4
  • kr 29,-
    +
    -
    3|2|34
    188
    Use for T-REX 250
  • Linkage Ball B(?3.5x7.32mm) x 2
  • kr 35,-
    +
    -
    3|2|34
    188
    Use for T-REX 250/SE/PRO
    kr 137,-
    +
    -
    3|4|34
    188
    Use for T-REX 250/SE/PRO. Must with: 250PRO Fuselage Parts (H25117)
    kr 105,-
    +
    -
    3|6|34
    188
    Use for T-REX 250PRO
    Must with:250PRO Lower Main Frame (H25115)
    kr 59,-
    +
    -
    3|9|34
    188
    Use for T-REX 250PRO
    kr 29,-
    +
    -
    3|4|34
    188
    DFC-hode til T-Rex 250. For lavere tyngdepunkt, må brukes sammen med flybarlesselektronikk.
    Follow by 700 DFC/600 DFCs design, the 250 DFC flybarless rotor head system utilizes extreme low CG design, effectively reduces resistance during flight
    kr 305,-
    +
    -
    3|2|34
    188
    6061-T6 Aluminum alloy material and CNC processed< /br>Use for Use for T-REX 250DFC.(H25119)
    kr 125,-
    +
    -
    3|4|34
    188
    6061-T6 Aluminum alloy material and CNC processed< /br>Use for Use for T-REX 250DFC.(H25119)
    kr 146,-
    +
    -
    3|5|34
    188
    Use for T-REX 250DFC. (H25119)
    kr 59,-
    +
    -
    3|3|34
    188
    The ball link are manufactured utilizing POM material, sleek surface, with superior anti-wear characteristic.
    Use for T-REX 250DFC(H25119).
    kr 45,-
    +
    -
    3|9|34
    188
    Suitable for T-REX 250DFC
    kr 36,-
    +
    -
    3|2|34
    188
    Use for T-REX 250
    kr 23,-
    +
    -
    3|2|34
    188
    6061-T6 Aluminum alloy material and CNC processed. Use for all T-REX 250 class machine.
    kr 89,-
    +
    -
    3|1|34
    188
    Use for all T-Rex 250 class machines.
    kr 55,-
    +
    -
    3|1|34
    188
    Use for T-REX 250PRO DFC
    kr 57,-
    +
    -
    3|2|34
    188
    Use for T-REX 250
    kr 45,-
    +
    -
    3|2|34
    188
    M0.4 Torque Tube Front Drive Gear Set/28T
    Use for T-REX 250PRO
    Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear st
    kr 115,-
    +
    -
    3|18|34
    188
    M0.4 Torque Tube Front Drive Gear Set/28T
    Use for T-REX 250PRO
    Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear st
    kr 67,-
    +
    -
    3|13|34
    188
    Use for T-REX 250 Plus DFC
    250 Plus DFC Main Rotor Grip Arm Integrated Control Link Set
    kr 73,-
    +
    -
    3|18|34
    188
    Utilizes dual point attachment design for zero play and higher precision control feel.
    kr 119,-
    +
    -
    3|7|34
    188
    Use for T-Rex 250 DFC
    kr 45,-
    +
    -
    3|2|34
    188
    H30B001XXT 300X Carbon Main Frame
    kr 186,-
    +
    -
    3|2|34
    188
    H30B002XXT 300X Main Frame Mounting Bolt (8)
    kr 95,-
    +
    -
    3|1|34
    188
    H30B003XXT 300X Battery Mount
    kr 63,-
    +
    -
    3|1|34
    188
    H30B004XXT 300X Gyro Mount Set
    kr 129,-
    +
    -
    3|2|34
    188
    H30B006XXT 300X Receiver Mount
    kr 129,-
    +
    -
    3|1|34
    188
    H30B007XXT 300X Frame Mounting Block
    kr 139,-
    +
    -
    3|2|34
    188
    H30B008XXT 300X Metal Anti Rotation Bracket
    kr 139,-
    +
    -
    3|1|34
    188
    H30B009XXT 300X Shapely Reinforcment Plate and Brace Assembly
    kr 169,-
    +
    -
    3|1|34
    188
    H30B010XXT 300X Motor Mount
    kr 112,-
    +
    -
    3|2|34
    188
    H30B011XXT 300X Main Shaft Bearing Block
    kr 223,-
    +
    -
    3|1|34
    188
    H30B012XXT 300X Canopy Mounting Bolt
    kr 57,-
    +
    -
    3|1|34
    188
    H30F001XXT 300X Landing Skid
    kr 59,-
    +
    -
    3|2|34
    188
    H30G001XXT 300X Main Drive Gear Mount 40T
    kr 185,-
    +
    -
    3|2|34
    188
    H30G002XXT 300X Main Drive Gear 115T (2pcs)
    kr 65,-
    +
    -
    3|2|34
    188
    H30G003XXT 300X Motor Pinion Gear 14T
    kr 65,-
    +
    -
    3|6|34
    188
    H30G004XXT 300X Main Gear Case Set
    kr 129,-
    +
    -
    3|2|34
    188
    H30H001XXT 300X Main Shaft
    kr 82,-
    +
    -
    3|5|34
    188
    H30H002XXT 300X Main Rotor Housing
    kr 179,-
    +
    -
    3|1|34
    188
    H30H003XXT 300X Feathering Shaft
    kr 87,-
    +
    -
    0|0|34
    188
    H30H004XXT 300X CCPM Metal Swashplate
    kr 235,-
    +
    -
    3|3|34
    188
    H30H005XXT 300X Linkage Rod Set
    kr 79,-
    +
    -
    3|1|34
    188
    H30H006XXT 300X Main Blade Holder
    kr 57,-
    +
    -
    3|5|34
    188
    H30H007XXT 300X Main Rotor Holder
    kr 189,-
    +
    -
    0|0|34
    188
    H30H008XXT 300X Swashplate Leveler
    kr 69,-
    +
    -
    3|4|34
    188
    H30H009XXT 300X Main Rotor Grip Arm Integrated
    kr 152,-
    +
    -
    3|1|34
    188
    H30R001XXT 300X F2.5-6M Thrust Bearing
    kr 63,-
    +
    -
    3|3|34
    188
    H30T001XXT 300X Tail Boom Set
    kr 89,-
    +
    -
    3|2|34
    188
    H30T002XXT 300X Carbon Fiber Vertical Stabilizer
    kr 119,-
    +
    -
    3|1|34
    188
    H30T003XXT 300X Tail Drive Belt
    kr 65,-
    +
    -
    3|8|34
    188
    H30T004XXT 300X Tail Boom Mount
    kr 65,-
    +
    -
    3|5|34
    188
    H30T005XXT 300X Tail Belt Feathering Shaft
    kr 66,-
    +
    -
    3|4|34
    188
    H30T006XXT 300X Belt Pulley Assembly
    kr 139,-
    +
    -
    3|2|34
    188
    H30T007XXT 300X Plastic Tail Belt Unit
    kr 119,-
    +
    -
    3|2|34
    188
    H30T008XXT 300X Plastic I-Shaped Arm Set
    kr 85,-
    +
    -
    3|2|34
    188
    H30Z001XXT 300X Linkage Ball Set
    kr 95,-
    +
    -
    3|2|34
    188
    H30Z002XXT 300X Screw Parts
    kr 43,-
    +
    -
    3|2|34
    188
    H45018T Metal Head Stopper
    kr 39,-
    +
    -
    3|2|34
    188
    H45019T Metal Flybar Control Set
  • Metal flybar control arm x 2
  • Flybar control rod x 2(F4.3x39mm)
  • Set screw x 2(M3x3mm)
  • Socket screw x 4(M2x4mm)
  • kr 119,-
    +
    -
    3|2|34
    188
    H45019TA Metal Flybar Control Set
    kr 109,-
    +
    -
    3|10|34
    188
    H45020T Metal Flybar Seesaw Holder
    kr 119,-
    +
    -
    3|16|34
    188
    H45021T Feathering Shafte
  • Use for T-REX 450 Pro/sport/Plus
  • Feathering shaft x 2
  • Washer x 2(F2xF6x0.6mm)
  • Socket screw x 2(M2x6mm)
  • Aluminum collar x 2(F4xF5.6x1mm)
  • kr 59,-
    +
    -
    3|3|34
    188
    Use for T-REX 450 Pro / 450 Sport V2. / Plus
    kr 109,-
    +
    -
    3|4|34
    188
    H45024T Radius Arm
    kr 29,-
    +
    -
    3|31|34
    188
    H45025T Metal SF Mixing Arm
    kr 95,-
    +
    -
    3|8|34
    188
    Use for T-REX 450 Pro / 450 Pro 3GX. 6061-T6 Aluminum alloy material and CNC processed.
    kr 115,-
    +
    -
    3|6|34
    188
    H45029T Carbon Fiber Bottom Plate 1.6mm
    kr 89,-
    +
    -
    3|4|34
    188
    Use for T-REX 450 Pro / 450 Pro 3GX
    kr 49,-
    +
    -
    3|1|34
    188
    H45033T Metal Stabilizer Mount
    kr 93,-
    +
    -
    3|1|34
    188
    H45036T Tail Boom Brace
    kr 59,-
    +
    -
    3|2|34
    188
    H45037T Tail Boom
  • 347 Tail boom x 2(F11xF12x347mm)
  • Rudder control rod x 1(F1.3x330mm)
  • Ball link x 2
  • Tail control guide x 2(F12.2xF14.6x4mm)
  • kr 75,-
    +
    -
    0|0|34
    188
    Use for T-REX 450 Pro/Pro V2.
    6061-T6 Aluminum alloy material and CNC processed.
    kr 229,-
    +
    -
    3|4|34
    188
    H45042T Torque Tube Bearing Holder
    kr 63,-
    +
    -
    3|2|34
    188
    H45044T Aluminum Hexagon Bolt
    kr 49,-
    +
    -
    3|2|34
    188
    H45045T Ball Link
    Use for T-REX 450 SE/V2/PRO.
    kr 35,-
    +
    -
    3|2|34
    188
    H45046T Ball Link A/B
    kr 29,-
    +
    -
    3|31|34
    188
    H45047T Stainless Steel Linkage Rod ( A )
    kr 35,-
    +
    -
    3|2|34
    188
    H45048T Linkage Ball Set
  • Linkage ball A(M2.5x4) x 2(F4.75x13mm)
  • Linkage ball A(M2x2.5) x 12(F4.75x7.18mm)
  • Long linkage ball (M2x2.5) x 1(F4.75x19.68mm)
  • kr 69,-
    +
    -
    3|1|34
    188
    H45049T Skid Mount
    kr 65,-
    +
    -
    3|7|34
    188
    Use for T-REX 450 L / Pro.
    kr 35,-
    +
    -
    3|2|34
    188
    H45050T Landing Skid White
  • Landing skid x 1
  • Washer x 2(F2.6xF5.8x0.6mm)
  • Socket button head screw x 2(M2.5x10mm)
  • kr 35,-
    +
    -
    3|2|34
    188
    H45050T-00 Landing Skid Black
  • Landing skid x 1
  • Washer x 2(F2.6xF5.8x0.6mm)
  • Socket button head screw x 2(M2.5x10mm)
  • kr 37,-
    +
    -
    3|3|34
    188
    Use for T-REX 450 Pro / 450 Pro 3GX.
    kr 45,-
    +
    -
    3|5|34
    188
    H45052T Canopy Mounting Bolt
    kr 27,-
    +
    -
    3|1|34
    188
    H45053T Torque Tube
  • Use for T-REX 450 Pro.
  • Special protection design torque tube. When you have a crash or collision with tail blade, it will protect the umbrella gear and make the damge at the back section of the torque tube. While using
  • kr 95,-
    +
    -
    3|5|34
    188
    H45059T Motor Pinion Gear 13T
    kr 36,-
    +
    -
    3|3|34
    188
    H45061T Frame hardware
  • Socket button head screw x 26(M2.5x5mm)
  • Socket button head screw x 2(M2.5x8mm)
  • Socket button head self tapping screw x 14(T2.6x6mm)
  • kr 47,-
    +
    -
    3|2|34
    188
    H45081T Metal Flybar Control Set 450Sport
    kr 115,-
    +
    -
    3|12|34
    188
    H45082T Metal Washout Control Arm 450Sport
    kr 106,-
    +
    -
    3|4|34
    188
    H45083T Radius arm
    kr 25,-
    +
    -
    3|19|34
    188
    H45084T Metal SF Mixing Arm Set 450Sport
    kr 99,-
    +
    -
    3|4|34
    188
    H45087T Bottom Plate
    kr 49,-
    +
    -
    3|17|34
    188
    H45088T Metal Main Shaft Bearing Block. Passer 450 Sport og SE v2.
    kr 99,-
    +
    -
    3|11|34
    188
  • Battery Mounting Plate x 1
  • Gyro Mount x 1
  • Socket button head self tapping screw x 6(T2x8mm)
  • kr 45,-
    +
    -
    3|12|34
    188
    H45091T Frame Mounting Block 450Sport
    kr 53,-
    +
    -
    3|3|34
    188
    H45094T Frame Hardware 450Sport
    kr 46,-
    +
    -
    3|1|34
    188
    H45095T Servo Mount Nut
    kr 22,-
    +
    -
    3|8|34
    188
    H45098T Tail Boom Mount 450Sport
    kr 106,-
    +
    -
    3|6|34
    188
    H45099T Metal Tail Drive Gear Assembly 450Sport
    kr 59,-
    +
    -
    3|44|34
    188
  • Metal tail drive pulley cover x 4
  • Metal tail drive pulley wheel x 2
  • Tail rotor shaft(F3x41mm) x 2
  • kr 69,-
    +
    -
    3|5|34
    188
    H45104T Stabilizer Mount
    kr 36,-
    +
    -
    0|0|34
    188
    H45105T 450 Sport Ball Link A/B 450Sport
    kr 29,-
    +
    -
    3|29|34
    188
    H45107T 450 Sport Linkage Ball Set
    kr 85,-
    +
    -
    3|6|34
    188
    Apply to 450 series
    kr 36,-
    +
    -
    3|2|34
    188
    H45108T Skid Pipe For T-Rex 450
    kr 27,-
    +
    -
    3|8|34
    188
    Use for T-REX 450 3G Programmable Flybarless System
  • Washer x 2
  • Radius arm x 2
  • 681ZZ Bearing x 4
  • FMR52ZZ Bearing x 4
  • 450FL Metal Washout Base x 1
  • 450FL Metal control arm x 2
  • Socket button head screw(0#×4mm) x 4
  • Socket button h
  • kr 145,-
    +
    -
    3|3|34
    188
    Use for 450 3G Programmable Flybarless System.
    kr 33,-
    +
    -
    3|2|34
    188
    Use for T-REX 450 3G Programmable Flybarless System
  • Linkage Ball A(M2.5x2.5) x 2
  • kr 33,-
    +
    -
    3|19|34
    188
    450 PRO FL V2 Main Rotor Housing Set/Black
    Use for T-REX450 PRO 3G Programmable Flybarless System
  • 6061-T6 Aluminum alloy material and CNC processed.
  • kr 129,-
    +
    -
    3|12|34
    188
  • 450 Metal Bearing mount x 1(F7xF9.5x5.2mm)
  • Bearing mount washer x 1(F4xF5.1x0.3mm)
  • Linkage Ball E(M2x2.5) x 1
  • MR74ZZ Bearing x 2(F4xF7x2.5mm)
  • kr 63,-
    +
    -
    3|3|34
    188
    6061 Aluminum alloy material and CNC processed?
  • Use for T-REX 450 PRO/SPORT.
  • kr 63,-
    +
    -
    3|1|34
    188
    6061-T6 Aluminum alloy material and CNC processed?
    Use for T-REX 450 PRO.
  • 450 PRO Metal rudder servo mount x 1(40.7x26x22.7mm)
  • Socket button head screw x 4(M2.5x6mm)
  • Socket button head screw x 4(M2.5x8mm)
  • kr 139,-
    +
    -
    3|2|34
    188
    A7075-T6 Aluminum alloy material and CNC processed?
  • Use for T-REX 450 PRO.
  • Metal Anti Rotation Bracket x 1
  • Socket button head screw x 2(M2.5x6mm)
  • kr 105,-
    +
    -
    3|1|34
    188
    6061-T6 Aluminum alloy material and CNC processed.
  • Use for T-REX 450 PRO Flybarless System.
  • kr 112,-
    +
    -
    3|4|34
    188
    Use for T-REX 450 Pro 3GX
    kr 25,-
    +
    -
    3|2|34
    188
    Use for T-REX 450 Sport V2.
  • 6061-T6 Aluminum alloy material and CNC processed
  • Must with:Sport V2 Metal Mixing Arm (U)(H45141)
  • kr 175,-
    +
    -
    3|3|34
    188
    6061-T6 Aluminum alloy material and CNC processed.
  • Use for T-REX 450 Sport V2 .
  • Must with:Sport V2 Metal Main Rotor Holder Set(H45139)
  • kr 95,-
    +
    -
    3|6|34
    188
    6061-T6 Aluminum alloy material and CNC processed.
  • Use for T-REX 450 Sport V2 .
  • Must with:Sport V2 New Metal Washout Base(H45145)
  • kr 139,-
    +
    -
    3|6|34
    188
    Use for T-REX 450 Sport V2.
  • 6061-T6 Aluminum alloy material and CNC processed
  • Must with:Sport V2 Metal Flybar Seesaw Holder set(H45140)
    Sport V2 Flybar Control Rod(H45144)
  • kr 109,-
    +
    -
    3|2|34
    188
    Use for T-REX 450 Sport V2.
  • 6061-T6 Aluminum alloy material and CNC processed
  • Must with:Sport V2 Metal Mixing Arm (L)(H45142)
  • kr 52,-
    +
    -
    3|6|34
    188
    Use for T-REX 450 Sport V2.
  • 6061-T6 Aluminum alloy material and CNC processed
  • Must with:Sport V2 Carbon Main Frame(U) set(H45147)
    Sport V2 Carbon Main Frame(L) set(H45148)
  • kr 145,-
    +
    -
    3|2|34
    188
    Use for T-REX 450 Sport V2
  • Must with:
    Sport V2 Metal Main Shaft Bearing Block(H45146)
    Sport V2 Carbon Main Frame(U) set(H45147)
    Sport V2 Bottom Plate(H45150)
    Sport V2 Fuselage Parts(H45151)
  • kr 112,-
    +
    -
    3|1|34
    188
    Use for T-REX 450 Sport V2.
  • Sport V2 Carbon Main Frame(U) set(H45147)
  • Sport V2 Carbon Main Frame(L) set(H45148)
  • kr 95,-
    +
    -
    3|3|34
    188
    Use for T-REX 450 Sport V2.
    kr 45,-
    +
    -
    3|2|34
    188
    Use for T-REX 450 Series.
    Must with::H45157 Motor Pinion Helical Gear 12T.
    New style high strength 121 tooth Mod 0.6 helical main hear for 450 size helis. The increase gear pitch can withstand higher power, at the same time minimize operat
    kr 43,-
    +
    -
    3|9|34
    188
    Use for T-REX 450 Series.
  • Must with:Slant Thread Main Drive Gear/121T(H45156)
  • kr 43,-
    +
    -
    3|2|34
    188
    Use for T-REX 450 Series.
    Must with:Slant Thread Main Drive Gear/121T(H45156)
    kr 35,-
    +
    -
    3|4|34
    188
    Use for T-REX 470L. Highly enhance structural strength, effectively increase the torsional capability.
    kr 49,-
    +
    -
    3|3|34
    188
    Follow by 700 DFC/600 DFCs design, the 450 DFC flybarless rotor head system utilizes extreme low CG design, effectively reduces resistance during flight, increased flight responsiveness and precision, resulting in superior 3D performance and unimagi
    kr 509,-
    +
    -
    3|1|34
    188
    Follow by 700 DFC/600 DFCs design, the 450 DFC flybarless rotor head system utilizes extreme low CG design, effectively reduces resistance during flight, increased flight responsiveness and precision, resulting in superior 3D performance and unimagi
    kr 446,-
    +
    -
    3|3|34
    188
    Use for Use for T-REX450DFC.(H45162QN)
    6061-T6 Aluminum alloy material and CNC processed.
    The damper rubbers are manufactured utilizing POM material, sleek surface, with superior anti-wear characteristic.
    kr 136,-
    +
    -
    3|1|34
    188
    Use for Use for T-REX450DFC.(H45162)
    6061-T6 Aluminum alloy material and CNC processed.
    The damper rubbers are manufactured utilizing POM material, sleek surface, with superior anti-wear characteristic.
    kr 127,-
    +
    -
    3|1|34
    188
    Use for T-REX450DFC.(H45162QN)
    6061-T6 Aluminum alloy material and CNC processed.
    kr 249,-
    +
    -
    3|2|34
    188
    Use for T-REX450DFC.(H45162)
    6061-T6 Aluminum alloy material and CNC processed.
    kr 189,-
    +
    -
    3|1|34
    188
    450DFC Main rotor grip arm integrated control link set.
    6061-T6 Aluminum alloy material and CNC processed.
    Suitable for T-REX 450DFC.
    kr 172,-
    +
    -
    3|5|34
    188
    Use for T-REX 450DFC. H45162
    kr 59,-
    +
    -
    3|8|34
    188
    Use for T-REX 450DFC. H45162
    kr 49,-
    +
    -
    3|2|34
    188
    Use for T-REX 450 Plus/Sport V2
    kr 82,-
    +
    -
    3|4|34
    188
    Use for T-REX 450 Plus/Sport V2
    kr 67,-
    +
    -
    0|0|34
    188
    H45172T 450 Plus Flybar Control Set
    kr 67,-
    +
    -
    3|11|34
    188
    Use for T-REX 450 Plus/Sport V2.
    kr 39,-
    +
    -
    3|6|34
    188
    Use for T-REX 450 Plus/Sport V2.
    kr 126,-
    +
    -
    3|7|34
    188
    Use for T-REX 450 Plus/Sport/Sport V2/SE/SE V2
    kr 127,-
    +
    -
    3|3|34
    188
    Use for T-REX 450 Plus/SE/SE V2/Sport/Sport V2.
    kr 55,-
    +
    -
    3|3|34
    188
    Utilizes dual point attachment design for zero play and higher precision control feel.Constructed with CNC aluminum alloy, with precision ball bearing at moving points, improving structure rigidity and smoothness, allowing rudder control to be more
    kr 249,-
    +
    -
    0|0|34
    188
    H45180T 450DFC Ball Link
    kr 39,-
    +
    -
    3|4|34
    188
    Utilizes dual point attachment design for zero play and higher precision control feel. Constructed with CNC aluminum alloy, with precision ball bearing at moving points, improving structure rigidity and smoothness, allowing rudder control to be more
    kr 259,-
    +
    -
    3|3|34
    188
    The ball link are manufactured utilizing POM material, sleek surface, with superior anti-wear characteristic.
    Use for T-REX 450DFC(H45162/45162QN).
    Must with H45165A
    kr 67,-
    +
    -
    3|9|34
    188
    Use for T-REX450.
    Use with H45038 Metal Tail Torque Tube Unit / H45038A Metal Tail Torque Tube Unit / H45179 450PRO Metal Tail Pitch Assembly. / H45181 450PRO V2 Metal Tail Pitch Assembly. / H45186 New Tail Torque Tube Unit.
    kr 42,-
    +
    -
    3|6|34
    188
    Suitable for T-REX 450DFC
    kr 35,-
    +
    -
    3|2|34
    188
    Brand new tail gear box with higher material quality and easy maintenance. Utilizes dual point attachment design for zero play and higher precision control feel. Constructed with CNC aluminum alloy, with precision ball bearing at moving points, impr
    kr 319,-
    +
    -
    3|1|34
    188
    Use for T-REX 450 PRO/SPORT V2
    kr 27,-
    +
    -
    3|3|34
    188
    Use for T-REX 450 L
    kr 127,-
    +
    -
    3|12|34
    188
    Use for T-REX 450 L
    kr 122,-
    +
    -
    3|2|34
    188
    Use for T-REX 450 L
    kr 57,-
    +
    -
    3|3|34
    188
    Use for T-REX 450 L
    kr 89,-
    +
    -
    3|3|34
    188
    Use for T-REX 450 L
    kr 79,-
    +
    -
    3|8|34
    188
    Use for T-REX 450 L
    New style swash anti-rotation guide with embedded anti-wear material, effectively minimize the wear between swashplate long ball and guide.
    kr 113,-
    +
    -
    3|1|34
    188
    Suitable for T-REX 450L/470L. 450L Metal Shapely Reinforcement Plate And Brace Assembly. Brand new CNC metal reinforcement plate and brace compare with frame mounting bolt effectively increase the torsional stength of main frame, under extreme 3D ma
    kr 195,-
    +
    -
    3|1|34
    188
    450L Metal Shapely Reinforcement Plate And Brace Assembly
    Suitable for T-REX 450L.
    Brand new CNC metal reinforcement plate and brace compare with frame mounting bolt effectively increase the torsional stength of main frame, under extreme 3
    kr 119,-
    +
    -
    3|5|34
    188
    Use for T-REX 450 L
    kr 97,-
    +
    -
    3|7|34
    188
    Use for T-REX 450 L
    kr 89,-
    +
    -
    3|5|34
    188
    Use for T-REX 450 L
    kr 142,-
    +
    -
    3|4|34
    188
    Use for T-REX 450 L
    kr 29,-
    +
    -
    3|4|34
    188
    Use for T-REX 450 L.
    Special design to extend the servo mounting space, it allow larger micro servo can be install on the helicopter directly without any extra washer, suitable for full size of micro servos.
    kr 146,-
    +
    -
    3|9|34
    188
    H45B014XXT450L Carbon Fiber Main Frame (L)
    kr 165,-
    +
    -
    3|5|34
    188
    H45B015XXT 450L Carbon Fiber Main Frame (R)
    kr 165,-
    +
    -
    3|5|34
    188
    M0.6 Torque Tube Front Drive Gear Set/28T
    Use for T-REX 450P L / PRO. Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear s
    kr 86,-
    +
    -
    3|3|34
    188
    M0.6 Torque Tube Front Drive Gear Set/26T
    Use for T-REX 450PRO
    Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear st
    kr 87,-
    +
    -
    3|4|34
    188
    Use for T-REX 450PRO
    Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage.
    Must with:
    kr 75,-
    +
    -
    3|5|34
    188
    104T 28T Autorotation Tail Drive Upgrade Set
    Use for T-REX 450L/450 PRO.
    Brand new autorotation tail drive upgrade set efficiently reduces the tail rpm while improving tail authority which allows for precise flying performance.
    kr 103,-
    +
    -
    3|1|34
    188
    H45G005XXT 104T M0.6 Autorotation Tail Drive Gear Set
    kr 73,-
    +
    -
    3|7|34
    188
    6061-T6 Aluminum alloy material and CNC processed.
    Use for T-REX 450PRO.
    kr 125,-
    +
    -
    3|6|34
    188
    450 Plus DFC Main Rotor Grip Arm Integrated Control Link Set
    kr 115,-
    +
    -
    3|3|34
    188
    Use for T-REX 450 Plus / Sport / Pro.
    Brand new design for 450 Feathering Shaft, both ends of shaft increased thickness from 3mm to 4mm, so its whole external diameter is equal in 4mm thick, plus 700 class of robust fixation between Main Rotor
    kr 95,-
    +
    -
    3|5|34
    188
    Use for T-REX 450 L / Plus / Sport / Pro.
    Must with:F4-8Thrust Bearing(H45R002XXW).
    kr 52,-
    +
    -
    3|5|34
    188
    Designed specifically for DFC rotorhead system, improving DFC connecting rods strength and minimizing linkage detachment during extreme flight maneuvers.
    6061-T6 Aluminum alloy material and CNC processed.
    Suitable for 450DFC Main Rotor Hea
    kr 185,-
    +
    -
    3|1|34
    188
    Designed specifically for DFC rotorhead system, improving DFC connecting rods strength and minimizing linkage detachment during extreme flight maneuvers.
    6061-T6 Aluminum alloy material and CNC processed.
    Suitable for 450DFC Main Rotor Hea
    kr 209,-
    +
    -
    3|5|34
    188
    Use for T-Rex 450
    kr 49,-
    +
    -
    3|4|34
    188
    Use for T-Rex 450 - Must with:450 Feathering Shaft H45H006
    kr 56,-
    +
    -
    3|2|34
    188
    Use for 450 Metal Tail Rotor Holder(H45T002XXT)
    kr 59,-
    +
    -
    3|1|34
    188
    H45R004XXT Bearing(F681XZZ)
    kr 89,-
    +
    -
    3|2|34
    188
    Use for T-REX 450 Metal Tail Pitch Assembly
    kr 29,-
    +
    -
    3|1|34
    188
    6061-T6 Aluminum alloy material and CNC processed.
    Use for T-REX 450.
    Must with 450 Metal Tail Rotor Holder(H45T002XXW).
    kr 52,-
    +
    -
    3|1|34
    188
    Use for T-REX 450 L / other 450 series.
    Must with: 450L Torque Tube(H45T005XXW).
    kr 45,-
    +
    -
    3|3|34
    188
    Use for T-REX 450L / other 450 series.
    The high torque power torque tube has the extreme strenth, anti-torque and difficult to break properties.
    Suitable for normal and 3D flying.
    Must with:450L Tail Linkage Rod(H45T004XXW).
    kr 67,-
    +
    -
    3|5|34
    188
    Use for T-REX 450 series.
    Using competitive material and special imbedded technology for vertical tail, enhanced its structural strength and boutique texture efficiently, vivacious color providing excellent visibility.
    kr 152,-
    +
    -
    3|2|34
    188
    Use for T-REX 450L
    kr 59,-
    +
    -
    3|1|34
    188
    450L Tailboom Support Rods Reinforcement Plates Set
    Use for T-REX 450

    Added tailboom support bridge design to increase the rigidity of the overall tailboom/support assembly.
    kr 35,-
    +
    -
    3|1|34
    188
    Use for T-REX 450L.
    6061-T6 Aluminum alloy material.
    kr 69,-
    +
    -
    0|0|34
    188
    H45T011XXT 450L Tail Boom Mount Set
    kr 73,-
    +
    -
    3|1|34
    188
    Apply for 450 Sport V2
    kr 35,-
    +
    -
    3|10|34
    188
    Use for T-REX 450L
    kr 69,-
    +
    -
    3|2|34
    188
    Use for T-REX 470L.
    kr 95,-
    +
    -
    3|2|34
    188
    H47B003AXT 470L Battery Mount
    kr 127,-
    +
    -
    3|4|34
    188
    Use for T-REX 470L/470LT
    kr 175,-
    +
    -
    3|2|34
    188
    H47B004XXT 470L Carbon Main Frame(L)
    kr 189,-
    +
    -
    3|2|34
    188
    Use for T-REX 470L/470LT
    kr 175,-
    +
    -
    3|2|34
    188
    H47B005XXT 470L Carbon Main Frame(R)
    kr 189,-
    +
    -
    3|1|34
    188
    Use for T-REX 470L.
    kr 47,-
    +
    -
    3|2|34
    188
    Use for T-REX 470L. Unique design for T-REX 470L for metal parts upgrade which is made of advanced aluminum CNC cutting manufactures. Clean aesthetic and high visibility in air, perfectly exhibits the T-REX 470L?s attractiveness and exclusiveness
    kr 115,-
    +
    -
    3|2|34
    188
    H47B009XXT 470L Motor Mount
    kr 119,-
    +
    -
    3|2|34
    188
    Use for T-REX 470L. 6061-T6 Aluminum alloy material and CNC processed.
    kr 149,-
    +
    -
    3|1|34
    188
    Use for T-REX 470L.
    kr 119,-
    +
    -
    3|6|34
    188
    Use for T-REX 470L.
    kr 87,-
    +
    -
    3|2|34
    188
    Use for T-REX 470L.
    kr 65,-
    +
    -
    3|3|34
    188
    Use for T-REX 470L.
    kr 59,-
    +
    -
    3|6|34
    188
    Use for T-REX 470L. 6061-T6 Aluminum alloy material and CNC processed.
    kr 89,-
    +
    -
    3|2|34
    188
    Use for T-REX 470L/450L/450 PRO
    kr 63,-
    +
    -
    3|1|34
    188
    Use for T-REX 470L/450L/450 PRO
    kr 65,-
    +
    -
    3|3|34
    188
    H47G001XXT 470L Main Gear Case Set
    kr 146,-
    +
    -
    3|1|34
    188
    H47G003XXT 470L Metal Tail Drive Belt Pulley Asse
    kr 159,-
    +
    -
    3|1|34
    188
    Use for T-Rex 470L
    kr 75,-
    +
    -
    3|5|34
    188
    H47G006XXT 470L M2.5 Drive Gear Mount
    kr 119,-
    +
    -
    3|2|34
    188
    H47G007XXT 470L M2.5 One-way Bearing Shaft
    kr 39,-
    +
    -
    3|1|34
    188
    H47G009XXT 104T Autorotation Tail Drive Gear
    kr 85,-
    +
    -
    3|4|34
    188
    H47G010XXT 470LT Main Drive Gear Mount
    kr 106,-
    +
    -
    3|1|34
    188
    H47G011XXT 470LT Main Gear Case Set
    kr 152,-
    +
    -
    3|2|34
    188
    H47G012XXT 470LT One-way Bearing Shaft
    kr 46,-
    +
    -
    3|3|34
    188
    Use for T-REX 470L.
    kr 59,-
    +
    -
    3|5|34
    188
    470L Counter Thread Main Linkage Rod Set
    kr 69,-
    +
    -
    3|1|34
    188
    H47H005XXT 470L Main Shaft Bearing Block
    kr 207,-
    +
    -
    3|2|34
    188
    H47H007XXT 470L Main Shaft Spacer
    kr 39,-
    +
    -
    3|1|34
    188
    This swashplate leveler allows for precise swashplate level adjustment, improving helicopter hover stability and flight performance.
    Tailored specifically for Align swashplate designs, utilizing CNC alloy metal for pleasing aesthetic and funct
    kr 105,-
    +
    -
    3|5|34
    188
    Use for T-REX 470L.
    kr 189,-
    +
    -
    3|1|34
    188
    6061-T6 Aluminum alloy material and CNC processed. Use for T-REX 470L.
    kr 175,-
    +
    -
    3|2|34
    188
    H47H014XXT 470L Plastic Main Rotor Holder
    kr 66,-
    +
    -
    3|2|34
    188
    H47H015XXT 470L Metal Upgrade Set
    kr 609,-
    +
    -
    3|5|34
    188
    H47H016XXT 470L M2.5 Main Shaft Set
    kr 89,-
    +
    -
    3|3|34
    188
    H47H017XXT 470L M2.5 Belt Pulley Assembly Upgrade Set
    kr 119,-
    +
    -
    3|2|34
    188
    Use for T-REX 470L.Manufactured utilizing POM material, sleek surface, with superior anti-wear characteristic.
    kr 59,-
    +
    -
    3|1|34
    188
    H47H019XXT 470L V2 Main Rotor Holder
    kr 216,-
    +
    -
    0|0|34
    188
    Use for T-REX 470L.
    kr 63,-
    +
    -
    3|2|34
    188
    H47T001XXT 470L Tail Boom
    kr 79,-
    +
    -
    3|3|34
    188
    H47T002XXT 470L Carbon Fiber Tail Linkage Rod
    kr 89,-
    +
    -
    3|1|34
    188
    H47T003XXT 470L Tail Linkage Rod
    kr 49,-
    +
    -
    3|9|34
    188
    H47T004XXT 470L Carbon Fiber Vertical Stabilizer
    kr 146,-
    +
    -
    3|3|34
    188
    H47T005XXT 470L Tail Rotor Hub
    kr 69,-
    +
    -
    3|3|34
    188
    H47T006XXT 470L Tail Rotor Holder
    kr 172,-
    +
    -
    3|1|34
    188
    H47T007AXT 470L Tail Belt Unit
    kr 363,-
    +
    -
    3|1|34
    188
    Use for T-REX 470L.
    kr 62,-
    +
    -
    3|1|34
    188
    H47T012XXT 470L Carbon Fiber Vertical Stabilizer
    kr 49,-
    +
    -
    3|2|34
    188
    Use for T-REX 470L.
    kr 116,-
    +
    -
    3|2|34
    188
    Use for T-REX 470L.
    kr 69,-
    +
    -
    3|2|34
    188
    Use for T-REX 470L.
    kr 139,-
    +
    -
    3|3|34
    188
    Use for T-REX 470L.
    kr 165,-
    +
    -
    3|1|34
    188
    Use for T-REX 470L.
    6061-T6 Aluminum alloy material and CNC processed.
    Unique design for T-REX 470L for metal parts upgrade which is made of advanced aluminum CNC cutting manufactures. Clean aesthetic and high visibility in air, perfectly
    kr 55,-
    +
    -
    3|1|34
    188
    Use for T-REX 470L. High quality new tail control arm, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.
    kr 57,-
    +
    -
    3|1|34
    188
    H47T021XXT 470L Metal Tail Rotor Shaft Assembly
    kr 95,-
    +
    -
    3|2|34
    188
    H47T022XXT 470L Tail Pitch Control Link
    kr 63,-
    +
    -
    3|2|34
    188
    H47T023XXT 470L Belt Pulley Assembly
    kr 129,-
    +
    -
    3|3|34
    188
    H47T024XXT 470LT Tail Boom Mount Set
    kr 69,-
    +
    -
    3|4|34
    188
    H47T025XXT 470LT Tail Torque Tube Unit
    kr 305,-
    +
    -
    3|2|34
    188
    H47T026XXT 470LT Torque Tube
    kr 76,-
    +
    -
    3|2|34
    188
    H47T027XXT 470LT Torque Tube Bearing Holder
    kr 57,-
    +
    -
    3|4|34
    188
    H47T028XXT 470LT Torque Tube Rear Drive Gear Set
    kr 67,-
    +
    -
    3|2|34
    188
    H47T030XXT 470L Metal Rudder Servo Mount
    kr 139,-
    +
    -
    3|1|34
    188
    Use for T-REX 470LM. Steel ball parts is made of rigid stainless steel, features wear-resisting, and anti-oxidization. Therefore this refitting component is absolutely helpful for the accuracy of flying movement control and the stable of the flight.
    kr 96,-
    +
    -
    3|2|34
    188
    H47Z004XXT M2.5 Special Washer
    kr 37,-
    +
    -
    3|3|34
    188
    6061-T6 Aluminum alloy material and CNC processed
  • Use for T-REX 500E / 500ESP / 500E PRO / 500EFL PRO.
  • kr 223,-
    +
    -
    3|1|34
    188
    H50004 Thrust Bearing
    kr 73,-
    +
    -
    3|2|34
    188
    H50006T Metal Main Rotor Housing
    kr 249,-
    +
    -
    3|2|34
    188
    H50012 Washout Control Arm
    kr 87,-
    +
    -
    3|5|34
    188
    H50013T-1 Metal Control Lever
    kr 219,-
    +
    -
    3|8|34
    188
    H50014T Radius Arm
    kr 25,-
    +
    -
    3|17|34
    188
    H50015T Metal Washout Base
    kr 59,-
    +
    -
    3|7|34
    188
    H50017 One-Way Shaft
    kr 39,-
    +
    -
    3|1|34
    188
    Suitable for all 500 class machines.
    kr 115,-
    +
    -
    3|11|34
    188
    Use for T-REX 500 series.
    kr 89,-
    +
    -
    3|3|34
    188
    145T M0.6 Autorotation Tail Drive Gear set
    Use for T-REX 500E / 500ESP / 500E PRO / 500EFL PRO.
    kr 59,-
    +
    -
    0|0|34
    188
    H50020T One Way Bearing
    kr 69,-
    +
    -
    3|2|34
    188
    H50022 Damper Rubber / Black 85
    kr 46,-
    +
    -
    3|2|34
    188
    H50023T Feathering Shaft
    kr 65,-
    +
    -
    3|4|34
    188
    H50024 SF Mixing Arm
    kr 65,-
    +
    -
    3|14|34
    188
  • Metal flybar seesaw holder x 1
  • Bearing MR83ZZ x 2(F3xF8x3mm)
  • Bearing MR74ZZ x 2(F4xF7x2.5mm)
  • M3 collar screw x 2(M3x9.6mm)
  • Socket button head screw x 2(M3x12mm)
  • Washer x 2(F3xF4.8x0.3mm)
  • kr 142,-
    +
    -
    3|1|34
    188
    H50026 Flybar Seesaw Holder
    kr 53,-
    +
    -
    3|17|34
    188
    Use for T-REX 500.
  • Suitable for:Tail Rotor Control Arm Set(H60044),Metal Tail Rotor Control Arm Set(H60186).
  • kr 57,-
    +
    -
    3|13|34
    188
    Use for T-REX 500.
  • Tail boom brace end x 4
  • Tail boom brace x 2(F1.9xF3.9x322mm)
  • kr 89,-
    +
    -
    3|1|34
    188
    H50037 Tail Rotor Shaft Assembly
    kr 66,-
    +
    -
    3|3|34
    188
    H50040 Tail Boom 2pcs
    kr 127,-
    +
    -
    3|2|34
    188
    H50041 Tail Case
    kr 69,-
    +
    -
    3|4|34
    188
    6061-T6 Aluminum alloy material and CNC processed
  • Use for T-REX 500E PRO / 500EFL PRO.
  • kr 69,-
    +
    -
    3|2|34
    188
    H50043 Tail Drive Gear Assembly
    kr 115,-
    +
    -
    3|6|34
    188
    H50044 Tail Boom Case
    kr 89,-
    +
    -
    3|6|34
    188
    H50045T Tail Drive Belt
    kr 73,-
    +
    -
    3|1|34
    188
    H50046T Plastic Hexagon Bolt
    kr 20,-
    +
    -
    3|17|34
    188
    H50047T Landing Skid
    kr 76,-
    +
    -
    3|1|34
    188
    H50050T Bearing Block
    kr 73,-
    +
    -
    3|3|34
    188
    Use for bearing block
  • 6061-T6 Aluminum alloy material and CNC processed
  • Use for T-REX 500E PRO / 500EFL PRO.
  • kr 47,-
    +
    -
    3|2|34
    188
    H50051T Hexagonal Bolt
    kr 47,-
    +
    -
    3|7|34
    188
  • Material:NBR
  • Quantity:4 pcs
  • Weight:0.71g/pcs
  • kr 29,-
    +
    -
    3|1|34
    188
    H50054T Ball link
    kr 39,-
    +
    -
    3|2|34
    188
    H50055T Main Blade Holder
    kr 35,-
    +
    -
    3|2|34
    188
    H50056T Canopy Nut
    kr 29,-
    +
    -
    0|0|34
    188
    H50057 Servo Feste Set
    kr 47,-
    +
    -
    3|1|34
    188
    H50060T Motor Pinion Gear 13T
    kr 33,-
    +
    -
    3|6|34
    188
    H50061 Motor Pinion Gear 14T
    kr 33,-
    +
    -
    3|4|34
    188
    H50062T Motor Pinion Gear 15T
    kr 33,-
    +
    -
    3|2|34
    188
  • Motor pinion gear 16T x 1
  • Modulus: 0.6
  • kr 33,-
    +
    -
    3|8|34
    188
    H50064T Motor Pinion Gear 17T
    kr 42,-
    +
    -
    3|1|34
    188
    H50065 Bearing (MR126ZZ)
    kr 75,-
    +
    -
    3|3|34
    188
    H50066 Bearing (MR74ZZ/MR83ZZ)
    kr 69,-
    +
    -
    3|5|34
    188
    H50067 Bearing ( MR688ZZ)
    kr 73,-
    +
    -
    3|1|34
    188
    H50068 Canopy Support
    kr 45,-
    +
    -
    3|3|34
    188
    6061-T6 Aluminum alloy material and CNC processed
  • Use for T-REX 500E PRO / 500EFL PRO.
  • kr 209,-
    +
    -
    3|1|34
    188
  • Tail blade x 2
  • New landing skid x 2
  • Flybar paddle x 2
  • M3 set screw x 6(M3x4mm)
  • Sticker x 4
  • kr 59,-
    +
    -
    3|8|34
    188
    H50089T 500Tail Shaft Slide Bush
    kr 35,-
    +
    -
    3|1|34
    188
  • Skid pipe x 2(F5xF6.5x237mm)
  • Skid pipe end cap x 4
  • kr 49,-
    +
    -
    3|2|34
    188
    H50094T-1 Main rotor Linkage Ball (M2.5)
    kr 45,-
    +
    -
    3|8|34
    188
    Torque-Tube til T-Rex 500

  • Torque tube x 1(F5xF6x467mm)
  • Torque tube end x 2(F2xF5.9x32mm)
  • Torque tube bearing holder x 1(F14.5x7.5x10mm)
  • Bearing MR106ZZ x 1(F6xF10x3mm)
  • kr 109,-
    +
    -
    3|19|34
    188
  • Use for T-REX 500.
  • Use for 500 Torque Tube Drive Assembly.
  • Bearing MR128 x 4(MR128)
  • Bearing 684ZZ x 2(F4xF9x4mm)
  • kr 127,-
    +
    -
    3|2|34
    188
    H50100T 500 Carbon Fiber Tail Boom
    kr 197,-
    +
    -
    3|3|34
    188
    H50101T Dampener Rubber Gray 70
    kr 27,-
    +
    -
    3|10|34
    188
    Use for T-REX 500E PRO / 500EFL PRO
    kr 133,-
    +
    -
    3|5|34
    188
    Inneholder:
  • Tail boom mount(Left) x 1
  • Tail boom mount(Right) x 1
  • Aluminum hexagonal bolt x 4(F4x35.7mm)
  • kr 97,-
    +
    -
    3|2|34
    188
    Inneholder:
  • Metal plate(L) x 1
  • Metal plate(R) x 1
  • Metal tail unit x 1
  • Control arm mounting bolt x 1
  • Tail rotor shaft assembly x 1
  • Aluminum bolt x 1(F4.98x24mm)
  • Front long umbrella gear-25T x 1(F18.5xF8x25.4mm)
  • Bushing x 1(F10
  • kr 303,-
    +
    -
    3|1|34
    188
    H50118T 500Carbon Fiber Flybar Paddle A
    kr 99,-
    +
    -
    3|1|34
    188
    Use for T-REX 500.
    kr 45,-
    +
    -
    3|3|34
    188
    Hjelpemiddel slik at man kan montere flybar på flybarlesshodet til T-rex 500. Dette for å lettere kunne måle pitch
    Use for T-REX500 3G Programmable Flybarless System
  • Pitch Gauge x 1
  • Socket button head screw(M2x6mm) x 1
  • kr 49,-
    +
    -
    3|1|34
    188
    Use for T-REX500 3G Programmable Flybarless System
  • Linkage Ball A(M2x3.5) x 2
  • Linkage Ball A(M2.5x3.5) x 2
  • Linkage Ball A(M3x4) x 2
  • kr 39,-
    +
    -
    3|3|34
    188
    6061-T6 Aluminum alloy material and CNC processed
  • Use for T-REX 500E PRO / 500EFL PRO
  • Must with:500PRO(H50119A)
  • kr 47,-
    +
    -
    3|3|34
    188
    6061-T6 Aluminum alloy material and CNC processed
  • Use for T-REX 500E / ESP / PRO / EFL PRO
  • Must with:500PRO Metal Tail Rotor Holder(H50119B)
  • kr 59,-
    +
    -
    3|4|34
    188
    H50140T Tail Rotor Hub 2pcs
    kr 47,-
    +
    -
    3|5|34
    188
    6061 Aluminum alloy material and CNC processed?
  • Use for T-REX 500.
  • kr 59,-
    +
    -
    3|2|34
    188
    500 Tail Case Part Bag
  • Use for T-REX 500 Tail Torque Tube.
  • kr 57,-
    +
    -
    3|14|34
    188
    Use for T-REX 500
  • 6061-T6 Aluminum alloy material and CNC processed
  • kr 87,-
    +
    -
    3|4|34
    188
    6061-T6 Aluminum alloy material and CNC processed
  • Use for T-REX 500EFL PRO.
  • kr 149,-
    +
    -
    3|7|34
    188
    Suitable for T-REX 500E PRO
  • 6061-T6 Aluminum alloy material and CNC processed.
  • kr 106,-
    +
    -
    3|10|34
    188
    Suitable for T-REX 500E PRO
  • 6061-T6 Aluminum alloy material and CNC processed.
  • kr 79,-
    +
    -
    3|8|34
    188
    Suitable for T-REX 500EFL PRO / 500L . 6061-T6 Aluminum alloy material and CNC processed.
    kr 123,-
    +
    -
    0|0|34
    188
    6061-T6 Aluminum alloy material and CNC processed.
  • Use for T-REX 500E PRO .
  • kr 119,-
    +
    -
    3|9|34
    188
    6061-T6 Aluminum alloy material and CNC processed.
  • Use for T-REX 500E PRO .
  • Must with: 500PRO Metal Washout Base(H50015A)
  • kr 119,-
    +
    -
    3|6|34
    188
    6061-T6 Aluminum alloy material and CNC processed.
  • Use for T-REX 500E PRO .
  • kr 109,-
    +
    -
    3|10|34
    188
    Use for T-REX 500E PRO / 500EFL PRO
    kr 119,-
    +
    -
    3|14|34
    188
    Use for T-REX 500E PRO / 500EFL PRO
    kr 35,-
    +
    -
    3|2|34
    188
    6061-T6 Aluminum alloy material and CNC processed
  • Use for T-REX 500E PRO / 500EFL PRO
  • kr 143,-
    +
    -
    3|3|34
    188
    7075-T6 Aluminum alloy material and CNC processed
  • Use for T-REX 500E PRO / 500EFL PRO.
  • kr 89,-
    +
    -
    3|1|34
    188
    Use for T-REX 500E PRO / 500EFL PRO
    kr 95,-
    +
    -
    3|4|34
    188
    Suitable for T-REX 500E PRO / 500EFL PRO
    kr 29,-
    +
    -
    3|2|34
    188
    Use for T-REX 500E PRO / 500EFL PRO
    kr 55,-
    +
    -
    3|1|34
    188
    Use for T-REX 500E PRO / 500EFL PRO
    kr 169,-
    +
    -
    3|2|34
    188
    Apply for T-REX 500E PRO / 500EFL PRO
    kr 59,-
    +
    -
    3|2|34
    188
    kr 55,-
    +
    -
    3|2|34
    188
    6061-T6 Aluminum alloy material and CNC processed.
  • Use for T-REX 500E PRO / 500EFL PRO
  • kr 27,-
    +
    -
    3|9|34
    188
    Precision CNC machined module 0.7 main gear for minimal noise and high energy transfer efficiency.
    Use for T-REX 500E / 500ESP / 500E PRO / 500EFL PRO .
    Must with:Motor Pinion Helical Gear 12T(H50168)
    kr 165,-
    +
    -
    3|3|34
    188
    6061-T6 Aluminum alloy material and CNC processed
  • Use for T-REX 500E / 500ESP / 500E PRO / 500EFL PRO.
  • Must with:Slant Thread Main Drive Gear/134T(H50178)
  • kr 45,-
    +
    -
    3|1|34
    188
    H50183T 500DFC Metal Main Rotor Holder Arm
    kr 89,-
    +
    -
    3|9|34
    188
    Main rotor grip arm integrated control link set. Use for T-REX500DFC.(H50181) 6061-T6 Aluminum alloy material and CNC processed.
    kr 152,-
    +
    -
    3|5|34
    188
    Use for T-REX 500DFC.(H50181)
    kr 127,-
    +
    -
    3|3|34
    188
    Use for T-REX 500DFC/600E PRO/600EFL PRO/600N V2/600N 3G .
    kr 39,-
    +
    -
    0|0|34
    188
    Suitable for T-REX 500DFC/500PRO/500FL PRO.
    kr 28,-
    +
    -
    3|1|34
    188
    H50188T 500DFC Head Damper
    kr 63,-
    +
    -
    3|3|34
    188
    Use for T-REX 500PRO.< /br>Must with H50082B 500PRO Metal Tail Pitch Assembly.
    kr 42,-
    +
    -
    3|1|34
    188
    Use for T-REX 500DFC(H50181)
    kr 57,-
    +
    -
    3|3|34
    188
    7075-T6 Aluminum alloy material and CNC processed.
    Use for T-REX 500E PRO
    kr 116,-
    +
    -
    3|3|34
    188
    Use for T-REX 500L. Utilizes composite material integration technology on carbon side frame plates, also adding battery mounting rails and top mounted motor base design make assembly easy and protectable.
    kr 329,-
    +
    -
    3|1|34
    188
    Use for T-REX 500L. Utilizes composite material integration technology on carbon side frame plates, also adding battery mounting rails and top mounted motor base design make assembly easy and protectable.
    kr 329,-
    +
    -
    3|1|34
    188
    Use for T-REX 500L.
    6061-T6 Aluminum alloy material and CNC processed.
    A single piece main bearing block with integrated servo mounts similar to that of T-Rex 700L, for simplified servo installation and clean aesthetic.
    kr 216,-
    +
    -
    3|2|34
    188
    H50B006AXT1 500X Monteringsbolt til baldakin passer til T-REX 500X / 500L
    kr 83,-
    +
    -
    3|2|34
    188
    H50B007AXT 500X Brushless ESC Mounting Plate Set
    kr 112,-
    +
    -
    3|4|34
    188
    Use for T-REX 500L.
    kr 199,-
    +
    -
    3|1|34
    188
    Use for T-REX 500L.
    kr 112,-
    +
    -
    3|2|34
    188
    500L Metal Shapely Reinforcement Plate And Brace Assembly Suitable for T-REX 500L. Brand new CNC metal reinforcement plate and brace compare with frame mounting bolt effectively increase the torsional stength of main frame, under extreme 3D maneuver
    kr 182,-
    +
    -
    3|1|34
    188
    Use for T-REX 500L. 6061-T6 Aluminum alloy material and CNC processed.
    kr 79,-
    +
    -
    3|4|34
    188
    Use for T-REX 500L.
    kr 112,-
    +
    -
    3|2|34
    188
    H50B015AXT 500XT Carbon Main Frame(L)
    kr 345,-
    +
    -
    3|2|34
    188
    H50B016AXT 500XT Carbon Main Frame(R)
    kr 345,-
    +
    -
    3|1|34
    188
    H50B017XXT 500X Bottom Plate
    kr 189,-
    +
    -
    3|2|34
    188
    H50F001XXT 500X Landing Skid
    kr 67,-
    +
    -
    3|1|34
    188
    M0.6 Torque Tube Front Drive Gear Set/36T
    Use for T-REX 500PRO
    Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear str
    kr 115,-
    +
    -
    3|2|34
    188
    Use for T-REX 500.
    Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage.
    kr 113,-
    +
    -
    3|5|34
    188
    M0.6 Torque Tube Front Drive Gear Set/31T for T-Rex 500
    Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and cr
    kr 159,-
    +
    -
    3|2|34
    188
    H50G005XXT 500X Drive Gear Mount
    kr 149,-
    +
    -
    3|3|34
    188
    H50G006XXT 500X Main Gear Case Set
    kr 143,-
    +
    -
    3|3|34
    188
    H50G008XXT 500X Tail Drive Belt Pulley Assembly
    kr 195,-
    +
    -
    3|3|34
    188
    H50G010XXT 130T Autorotation Tail Drive Gear
    kr 67,-
    +
    -
    3|7|34
    188
    H50G011XXT 500XT Main Drive Gear Mount
    kr 175,-
    +
    -
    3|1|34
    188
    H50G012XXT 500XT One-way Bearing Shaft
    kr 57,-
    +
    -
    3|5|34
    188
    H50G013XXT M0.7 Torque Tube Front Drive Gear Set/34T
    kr 127,-
    +
    -
    3|1|34
    188
    Use for T-REX 500L.
    6061-T6 Aluminum alloy material and CNC processed.
    kr 193,-
    +
    -
    3|3|34
    188
    Suitable for T-REX 500L / 500 PRO DFC.
    Specially designed for both DFC and FL flybarless rotor head system, improving linkage rod connection strength and minimizing detachment during extreme flight maneuvers.
    6061-T6 Aluminum alloy materi
    kr 319,-
    +
    -
    3|1|34
    188
    Use for T-REX 500X
    kr 267,-
    +
    -
    3|1|34
    188
    6061-T6 Aluminum alloy material and CNC processed. Use for T-REX 500X.
    kr 203,-
    +
    -
    3|2|34
    188
    H50H007XXT 500X Main Shaft
    kr 159,-
    +
    -
    3|5|34
    188
    Use for T-REX 500X
    kr 286,-
    +
    -
    3|1|34
    188
    H50T005XXT 500X Tail Belt Unit
    kr 345,-
    +
    -
    3|1|34
    188
    H50T006XXT 500X Tail Rotor Hub Set
    kr 76,-
    +
    -
    3|1|34
    188
    H50T007XXT 500X Tail Rotor Holder
    kr 249,-
    +
    -
    3|1|34
    188
    H50T008XXT Tail Drive Belt
    kr 67,-
    +
    -
    3|4|34
    188
    H50T009XXT Carbon Fiber Stabilizer 500X
    kr 152,-
    +
    -
    3|1|34
    188
    Use for T-REX 500X.
    kr 159,-
    +
    -
    3|3|34
    188
    H50T012XXT 500X Tail Boom
    kr 119,-
    +
    -
    3|6|34
    188
    H50T013XXT Carbon Fiber Tail Linkage Rod 500X
    kr 125,-
    +
    -
    3|4|34
    188
    H50T014XXT 500X Tail Belt Feathering Shaft
    kr 89,-
    +
    -
    3|1|34
    188
    H50T015XXT 500X Belt Pulley Assembly
    kr 149,-
    +
    -
    3|3|34
    188
    H50T016XXT 500XT Tail Boom Mount Set
    kr 116,-
    +
    -
    3|1|34
    188
    H50T017XXT 500XT Tail Torque Tube Unit
    kr 349,-
    +
    -
    3|1|34
    188
    H50T018XXT 500XT Torque Tube
    kr 89,-
    +
    -
    3|1|34
    188
    Use for T-REX 500L.
    kr 56,-
    +
    -
    3|2|34
    188
    Use for T-REX 500L.
    Steel ball parts is made of rigid stainless steel, features wear-resisting, and anti-oxidization.
    kr 75,-
    +
    -
    3|2|34
    188
    H50Z003XXT 500X Linkage Rod Set
    kr 82,-
    +
    -
    3|1|34
    188
    H50Z004XXT 500X Linkage Ball Set
    kr 95,-
    +
    -
    3|2|34
    188
    6061-T6 Aluminum alloy material and CNC processed?
  • Use for T-REX 550E
  • kr 112,-
    +
    -
    3|1|34
    188
    6061-T6 Aluminum alloy material and CNC processed?
  • Use for T-REX 550E
  • kr 24,-
    +
    -
    3|13|34
    188
    6061-T6/7075-T6 Aluminum alloy material and CNC processed?
  • Use for T-REX 550E.
  • kr 145,-
    +
    -
    3|1|34
    188
    H55025T Frame Hardware
    kr 67,-
    +
    -
    3|2|34
    188
    Apply to T-REX 550E / 600E.
    kr 52,-
    +
    -
    3|5|34
    188
    Use for T-REX 550E.
    kr 106,-
    +
    -
    3|1|34
    188
    550 Carbon Tail Control Rod Assembly
    Use for T-REX 550E.
    kr 169,-
    +
    -
    3|2|34
    188
    Apply for T-REX 550E
    kr 47,-
    +
    -
    3|3|34
    188
    Use for T-REX 550
  • 600 Linkage rod(A) x 4(F1.96x14mm)
  • 600 Linkage rod(E) x 3(F1.96x32mm)
  • 700N Linkage rod(D) x 2(F1.96x44mm)
  • kr 33,-
    +
    -
    3|4|34
    188
    Use for T-REX 550.
  • Motor pinion gear 17T x 1
  • kr 49,-
    +
    -
    3|5|34
    188
    H55059T Main Blade Screws
    kr 39,-
    +
    -
    3|3|34
    188
    Use for T-REX 550
  • Tail drive belt(550XL) x 1
  • kr 45,-
    +
    -
    3|12|34
    188
    6061-T6 Aluminum alloy material and CNC processed
    Apply for T-REX 550E PRO.
    Must with 550E PRO Carbon Fiber Main Frame-2.0mm(H55B003XXW)
    kr 57,-
    +
    -
    3|3|34
    188
    Use for T-REX 550E PRO.
    Must with 550E PRO Motor Mount(H55B002XXW)
    kr 532,-
    +
    -
    3|2|34
    188
    Use for T-REX 550X. Carbon side frame plates utilized composite material integration technology, adding battery mounting rails.The clever use of open spaces within the frame resulting in a structure that is both rigid and aesthetically pleasing.
    kr 479,-
    +
    -
    3|1|34
    188
    Carbon side frame plates utilized composite material integration technology, adding battery mounting rails.The clever use of open spaces within the frame resulting in a structure that is both rigid and aesthetically pleasing.
    kr 367,-
    +
    -
    3|1|34
    188
    Use for T-REX 550X Carbon side frame plates utilized composite material integration technology, adding battery mounting rails.The clever use of open spaces within the frame resulting in a structure that is both rigid and aesthetically pleasing.
    kr 425,-
    +
    -
    3|1|34
    188
    6061-T6 Aluminum alloy material and CNC processed. Apply for T-REX 550L/550X.
    kr 259,-
    +
    -
    3|2|34
    188
    6061-T6 Aluminum alloy material and CNC processed. Apply for T-REX 550L.
    kr 207,-
    +
    -
    3|3|34
    188
    6061-T6 Aluminum alloy material and CNC processed.
    Apply for T-REX 550L/550X.
    kr 189,-
    +
    -
    3|2|34
    188
    6061-T6 Aluminum alloy material and CNC processed. Apply for T-REX 550L.
    kr 159,-
    +
    -
    3|4|34
    188
    6061-T6 Aluminum alloy material and CNC processed. Apply for T-REX 550L.
    kr 169,-
    +
    -
    3|2|34
    188
    6061-T6 Aluminum alloy material and CNC processed.
    Apply for T-REX 550L/550X.
    kr 189,-
    +
    -
    3|2|34
    188
    6061-T6 Aluminum alloy material and CNC processed. Apply for T-REX 550L.
    kr 149,-
    +
    -
    3|1|34
    188
    6061-T6 Aluminum alloy material and CNC processed. Apply for T-REX 550L/550X.
    kr 137,-
    +
    -
    3|3|34
    188
    6061-T6 Aluminum alloy material and CNC processed. Apply for T-REX 550L.
    kr 103,-
    +
    -
    3|1|34
    188
    6061-T6 Aluminum alloy material and CNC processed. Use for T-REX 550L.
    kr 65,-
    +
    -
    3|2|34
    188
    Use for T-REX 550L/550X.
    kr 269,-
    +
    -
    3|3|34
    188
    Use for T-REX 550L/550X
    kr 186,-
    +
    -
    3|1|34
    188
    H55B013XXT 550L Receiver Mount
    kr 149,-
    +
    -
    3|3|34
    188
    H55B014XXT 550L Aluminum Hexagonal Bolt
    kr 49,-
    +
    -
    3|2|34
    188
    Suitable for T-REX 550L. Brand new CNC metal reinforcement plate and brace compare with frame mounting bolt effectively increase the torsional stength of main frame, under extreme 3D maneuver, you can strongly feel its solid reinforcement from its s
    kr 225,-
    +
    -
    3|1|34
    188
    Bruges til T-REX 550E.
    Splinterny M1 motorspiralformet tandhjul med rustfrit stålmateriale. Disse høje styrke og høje stivhedsegenskaber kan hjælpe med at øge slidstyrken og levetiden.
    kr 109,-
    +
    -
    3|3|34
    188
    Use for T-REX 550E.
    Brand new M1 motor helical pinion with Stainless steel material. This high strength and high rigidity characteristics can help to increase wear resistance and longevity.
    kr 39,-
    +
    -
    3|1|34
    188
    Use for T-REX 550E PRO.
    Brand new M1 motor helical pinion with Stainless steel material. This high strength and high rigidity characteristics can help to increase wear resistance and longevity.
    Must with 550E PRO Motor Mount(H55B002XXW), 5
    kr 49,-
    +
    -
    3|1|34
    188
    H55H001AXT 550E DFC Main Shaft
    kr 189,-
    +
    -
    3|4|34
    188
    H55H001XXT 550L Main Shaft Set
    kr 165,-
    +
    -
    0|0|34
    188
    The 550FL Flybarless Rotor Head System utilizes extreme low CG design, effectively reduces resistance during 3D maneuvers, increased flight responsiveness and precision. In addition, the styling appearance harmony with red anodized and stainless col
    kr 759,-
    +
    -
    3|2|34
    188
    Suitable for T-REX 550L
    Must with 550FL Flybarless Rotor Head System(H55H002XXT)
    kr 172,-
    +
    -
    3|2|34
    188
    Tre blads rotorhode, passer til T-Rex 550/600. Dette rotorhode gir deg overlegent stabilitet og lavt tyngdepunkt.
    kr 1.400,-
    +
    -
    3|1|34
    188
    H55H005XXT 550E Tri-Blades Main Shaft
    kr 185,-
    +
    -
    3|2|34
    188
    Use for T-REX 550L/550X.
    kr 252,-
    +
    -
    3|1|34
    188
    Use for T-REX 550L/550X.
    kr 203,-
    +
    -
    3|1|34
    188
    Use for T-REX 550L/550X.
    kr 305,-
    +
    -
    3|1|34
    188
    Use for T-REX 550
    Brand new matting carbon tailboom using carbon fiber and aluminum imbedded technology, features light weight and high strength, its unique matting carbon color coupled with whole helicopter, definitely let your helicopter outs
    kr 206,-
    +
    -
    0|0|34
    188
    Use for T-REX 550L/550X/600N.
    kr 165,-
    +
    -
    3|2|34
    188
    Use for T-REX 550L/600N.
    kr 152,-
    +
    -
    3|2|34
    188
    H55T005XXT 3 blads halerotor gir deg overlegent "tail-lock" egenskaper og god kontroll følelse. Ypperlig til 3D flyvning. Passer til T-Rex 550/600.
    kr 635,-
    +
    -
    3|2|34
    188
    H55T006XXT 550X Carbon Fiber Vertical Stabilizer
    kr 159,-
    +
    -
    3|3|34
    188
    Use for T-REX 550X.
    kr 185,-
    +
    -
    3|3|34
    188
    H55T008XXT Three Blades Tail Rotor Hub Shafts
    kr 75,-
    +
    -
    3|3|34
    188
    H60001T-1 Thrust Bearing
    kr 69,-
    +
    -
    3|2|34
    188
    H60002T Bearing (MR148ZZ)
    kr 99,-
    +
    -
    3|3|34
    188
    H60004T-00 Metal Main Rotor Housing/Black
    kr 209,-
    +
    -
    3|2|34
    188
    6061-T6 Aluminum alloy material and CNC processed?
  • Use for T-REX 550E.
  • Metal head stopper x 1
  • Socket screw x 1(M3x8mm)
  • kr 36,-
    +
    -
    3|2|34
    188
    H60006T Feathering Shaft
    kr 59,-
    +
    -
    3|4|34
    188
    H60012T Flybar Rod
    kr 35,-
    +
    -
    0|0|34
    188
    Use for T-REX 550E/600/600 Nitro
    kr 267,-
    +
    -
    3|5|34
    188
    Use for T-REX 550E, T-REX 600/600 Nitro.
    Must with New Main Gear Case Set-Black(HN6064BA).
    kr 147,-
    +
    -
    3|5|34
    188
    Use for T-REX 550E, T-REX 600/600 Nitro.
    Must with New Main Gear Case Set-Black(HN6064BA).
    kr 172,-
    +
    -
    3|1|34
    188
    H60021T One-Way Bearing
    kr 82,-
    +
    -
    3|1|34
    188
    H60023T Control Shaft
    kr 29,-
    +
    -
    3|19|34
    188
    H60024T Elevator Lever
    kr 35,-
    +
    -
    3|5|34
    188
    H60030T Canopy Mounting Bolt
    kr 20,-
    +
    -
    3|5|34
    188
    H60031T Bearing Block
    kr 79,-
    +
    -
    3|20|34
    188
    H60032T Aluminium Hexagon Bolt
    kr 45,-
    +
    -
    3|1|34
    188
    6061-T6 Aluminum alloy material and CNC processed?
  • Apply for T-REX 550E / 600E?
  • kr 59,-
    +
    -
    3|3|34
    188
    Inneholder:
  • Tail boom case(Left) x 1
  • Tail boom case(Right) x 1
  • Plastic hexagonal bolt x 6
  • Socket button head screw x 1(M3x5mm)
  • kr 115,-
    +
    -
    3|2|34
    188
    H60036T Tail Drive Belt
    kr 47,-
    +
    -
    3|3|34
    188
    H60039T Standard Landing Skid
    Passer kun til 600E
    kr 49,-
    +
    -
    3|5|34
    188
    H60040T 3D Landing Skid
    Passer kun til 600E
    kr 39,-
    +
    -
    3|2|34
    188
  • Tail boom brace end x 4
  • M3 special washer x 4(F3xF8x2mm)
  • Tail boom brace x 2(F5x460mm)
  • Socket button head screw x 2(M3x8mm)
  • Socket button head screw x 2(M3x12mm)
  • kr 92,-
    +
    -
    0|0|34
    188
    H60054T Hook & Loop Fastening Tape
    Lengde 35cm, der de siste 5cm er "hektedelen"
    kr 39,-
    +
    -
    3|9|34
    188
    H60062T Bevel Main Drive Gear/188T
    kr 97,-
    +
    -
    3|3|34
    188
    H60063T Bearing(MR105ZZ)
    kr 63,-
    +
    -
    3|3|34
    188
    Use for T-REX 550E/600E/600 Nitro/700E/700 Nitro
    kr 45,-
    +
    -
    3|2|34
    188
    Use for T-REX 500/600/600 Nitro
    kr 56,-
    +
    -
    3|5|34
    188
    H60073T Radius Arm
    kr 18,-
    +
    -
    3|11|34
    188
    Use for T-REX 550 / 600 / 700 Series.
    kr 82,-
    +
    -
    0|0|34
    188
    T-REX metal tail pitch assembly features high precise bearing structure and high rigid CNC processes aluminum alloy material, and therefore this refitting component is absolutely helpful for the accuracy of flying movement control and the stable of
    kr 165,-
    +
    -
    3|1|34
    188
    H60085T Main Blade Holder
    kr 52,-
    +
    -
    3|1|34
    188
    4pcs bearing 3x7x3
    kr 59,-
    +
    -
    3|1|34
    188
    H60087T Bearing (MR74ZZ/623ZZ)
    kr 49,-
    +
    -
    3|20|34
    188
    H60089T Linkage Ball Set
    kr 99,-
    +
    -
    3|1|34
    188
    H60092T Canopy Mounting Bolt
    kr 47,-
    +
    -
    3|6|34
    188
    H60102T Bearing 5x11x5 - 2 stk 685ZZ
    kr 65,-
    +
    -
    3|1|34
    188
    H60103 Bearing(684ZZ)
    kr 69,-
    +
    -
    3|2|34
    188
    H60104 Bearing(MR83ZZ/MR95ZZ)
    kr 55,-
    +
    -
    3|15|34
    188
    H60105 Bearing(6800ZZ/689ZZ)
    kr 89,-
    +
    -
    3|3|34
    188
    H60106T Bearing (MR106ZZ)
    kr 59,-
    +
    -
    3|1|34
    188
    H60108 Flybar Rod/440mm
    kr 39,-
    +
    -
    3|3|34
    188
    H60111 New Landing Skid
    kr 69,-
    +
    -
    3|3|34
    188
    H60119T-1 Torque Tube Drive set
    kr 146,-
    +
    -
    3|6|34
    188
    H60120T M3 Stainless Steel Linkage Ball
    kr 57,-
    +
    -
    3|2|34
    188
    H60124T 600 Torque Tube Drive Bearing Holder
    kr 92,-
    +
    -
    3|7|34
    188
    H60125T Bearing (6701ZZ)
    kr 92,-
    +
    -
    3|2|34
    188
    H60126T New Landing Skid
    kr 69,-
    +
    -
    3|2|34
    188
    H60129 Hook and Loop Tape / 600 brug
  • Brug Hook and Loop Tape, tape Hook-siden (hooket) på batteriets monteringsplade og Loops-siden (fuzzy) på batteriet for at fastgøre batteriet og undgå eventuel slip .
  • Spænd krogsiden (hooket) på ba
  • kr 35,-
    +
    -
    3|18|130
    188
    H60139AT One-way Bearing Shaft.
    Use with 180T M0.6 Autorotation Tail Drive Gear(H60020A):
  • Must with Torque Tube Front Drive Gear Set (H60121) or (H60147) or (H60122) .Suitable use for T-REX 600E/600N/550E
    Use with 131T M0.8 Autorotatio
  • kr 86,-
    +
    -
    3|2|34
    188
    H60145 Main Blade Holder Dual
    kr 63,-
    +
    -
    3|6|34
    188
    H60149T 600 Canopy Nut
    kr 39,-
    +
    -
    0|0|34
    188
    H60150T New Tail Control Guide
    kr 43,-
    +
    -
    3|1|34
    188
    Use for T-REX 550E/600E/600N/ 700E/700N
  • Must with:V2 Metal Tail Rotor Holder/Silver(HN6103B)
  • kr 69,-
    +
    -
    3|2|34
    188
    H60158T Screw
  • Socket collar screw x 2(M4x27mm)
  • Socket collar screw x 2(M3x22mm)
  • M4 nut x 2
  • M3 nut x 2
  • kr 18,-
    +
    -
    3|1|34
    188
    H60159T Main Shaft

  • Main shaft x 2(F10x201x29.3mm)
  • Lock collar x 1(F10xF16x6mm)
  • M4 set screw x 2(M4x4mm)
  • Socket collar screw x 2(M3x22mm)
  • M3 nut x 2
  • kr 95,-
    +
    -
    3|11|34
    188
  • Tail shaft slide bush x 1(F5XF7.2X16.7mm)
  • kr 39,-
    +
    -
    3|6|34
    188
    H60161T Main Blade Linkage Rod
    kr 29,-
    +
    -
    3|10|34
    188
  • Linkage rod(E) x 4(F1.96x32mm)
  • Linkage rod(F) x 2(F1.96x11mm)
  • kr 25,-
    +
    -
    3|2|34
    188
  • Metal flybar seesaw holder x 1
  • Bearing MR83ZZ x 2(F3x8x3mm)
  • Bearing MR74ZZ x 2(F4xF7x2.5mm)
  • M3 collar screw x 2(M3x9.6mm)
  • Socket button head screw x 2(M3x12mm)
  • Washer x 2(F3xF5.5x0.3mm)
  • kr 152,-
    +
    -
    3|8|34
    188
    H60167T Motor Pinion Gear 11T
  • Motor pinion gear 11T x 2
  • Modulus:0.7
  • Shaft diamater:F5mm
  • Weight:2.6g/pc
  • kr 46,-
    +
    -
    3|13|34
    188
    H60168T Motor Pinion Gear 12T
  • Motor pinion gear 12T x 2
  • Modulus:0.7
  • Shaft diamater:F5mm
  • Weight:2.6g/pc
  • kr 46,-
    +
    -
    3|11|34
    188
    H60169T Motor Pinion Gear 13T
  • Motor pinion gear 13T x 2
  • Modulus:0.7
  • Shaft diamater:F5mm
  • Weight:2.6g/pc
  • kr 46,-
    +
    -
    3|5|34
    188
    H60177T 600ESP Main Shaft
    kr 76,-
    +
    -
    3|4|34
    188
    H60181T 600ESP Control Shaft
    kr 39,-
    +
    -
    3|10|34
    188
    H60182T Main Blade Screws
    kr 22,-
    +
    -
    3|11|34
    188
    6061-T6 Aluminum alloy material and CNC processed?
  • Use for T-REX 600N/600E/700E tail servo.
  • kr 129,-
    +
    -
    3|4|34
    188
    6061-T6 Aluminum alloy material and CNC processed
  • Use for T-REX 500/550E/600E/600N.
  • Must with:(Optional) H60077A, H60133B.
  • kr 87,-
    +
    -
    3|2|34
    188
    H60187T Frame Mounting Bolt
    kr 39,-
    +
    -
    3|14|34
    188
    H60188T Metal Stabilizer Belt
    kr 172,-
    +
    -
    3|1|34
    188
  • Long linkage ball(M3x3) x 1(F4.75x24.59mm)
  • Linkage ball B(M3x3) x 7(F4.75x9.77mm)
  • kr 46,-
    +
    -
    3|9|34
    188
    H60191T Control Link
    kr 39,-
    +
    -
    3|11|34
    188
    H60193T 600ESP Servo Linkage Rod
    kr 25,-
    +
    -
    3|1|34
    188
    Suitable for T-REX 550E/600E PRO/600EFL PRO.
    Suitable with: 600PRO Main Gear Case Set(H60200)
    One-way Bearing Shaft(H60139A)
    Torque Tube Front Drive Gear Set(H60228)
    kr 159,-
    +
    -
    3|2|34
    188
    Suitable for T-REX 550E/600E PRO/600EFL PRO.
    Suitable with:
  • 600PRO Main Gear Case Set(H60200)
  • CNC Slant Thread Main Drive Gear/112T(H70020)
  • One-way Bearing Shaft(H60139A)
  • 131T M0.8 Autorotation Tail Drive Gear(H60198)and Torque Tube
  • kr 66,-
    +
    -
    3|2|34
    188
    131T M0.8 Autorotation Tail Drive Gear Assembly - Suitable for T-REX 550E/600E PRO.
    kr 109,-
    +
    -
    3|4|34
    188
    131T M0.8 Autorotation Tail Drive Gear Assembly

    Suitable for T-REX 550E/600E PRO/600EFL PRO.
  • Suitable with:600PRO Main Gear Case Set(H60200)
    CNC Slant Thread Main Drive Gear/112T(H70020)One-way Bearing Shaft(H60139A)
    131T M0.8 Autor
  • kr 89,-
    +
    -
    3|12|34
    188
    New design of one-way bearing for preventing locking.
  • Use for T-REX 600E PRO/600EFL PRO.
  • Suitable with:
    CNC Slant Thread Main Drive Gear/112T(H70020A)One-way Bearing Shaft(H60139A)
    131T M0.8 Autorotation Tail Drive Gear(H60198)and Torque
  • kr 216,-
    +
    -
    3|2|34
    188
    Use for T-REX 600E PRO
    kr 203,-
    +
    -
    3|8|34
    188
    Use for T-REX 600E PRO
    kr 125,-
    +
    -
    3|5|34
    188
    Suitable for T-REX 600E PRO / 600EFL PRO.
  • 6061-T6 Aluminum alloy material and CNC processed.
  • kr 275,-
    +
    -
    3|2|34
    188
    Use for T-REX 600E PRO / 600EFL PRO
    kr 419,-
    +
    -
    3|2|34
    188
    Use for T-REX 600E PRO / 600EFL PRO
    kr 419,-
    +
    -
    3|2|34
    188
    H60214AT 600PRO Frame Mounting Block
    kr 109,-
    +
    -
    3|1|34
    188
    H60215T 600PRO Battery Mount
    kr 179,-
    +
    -
    3|1|34
    188
    Apply for T-REX 600E PRO / 600EFL PRO
    kr 47,-
    +
    -
    3|12|34
    188
  • Suitable for T-REX 600E PRO / 600EFL PRO
  • kr 203,-
    +
    -
    3|1|34
    188
    Use for T-REX 600E PRO
    kr 59,-
    +
    -
    3|3|34
    188
    Suitable for T-REX 600E PRO
    kr 49,-
    +
    -
    3|2|34
    188
    Use for T-REX 600E PRO
  • Steel ball parts is made of rigid stainless steel, features wear-resisting, and anti-oxidization. Therefore this refitting component is absolutely helpful for the accuracy of flying movement control and the stable of the fl
  • kr 65,-
    +
    -
    3|2|34
    188
    Use for T-REX 550E / 600E PRO / 600EFL PRO
    kr 59,-
    +
    -
    3|3|34
    188
    Suitable for T-REX 550/600. Must with 550FL Flybarless Rotor Head System(H55H002XXT) or 600FL Flybarless Rotor Head System(H60H003XXT). 6061-T6 Aluminum alloy material and CNC processed.
    kr 169,-
    +
    -
    3|5|34
    188
    Use for T-REX 600EFL PRO
    kr 45,-
    +
    -
    3|2|34
    188
    Use for T-REX 550E / 600E PRO / 600EFL PRO
  • Suitable for:131T M0.8 Autorotation Tail Drive Gear(H60198)
  • Steel ball parts is made of rigid stainless steel, features wear-resisting, and anti-oxidization. Therefore this refitting component is abso
  • kr 57,-
    +
    -
    3|3|34
    188
    Use for T-REX 550E V2/600N V2/600E PRO/600EFL PRO.
  • Must with Metal Tail Pitch Assembly(H60077A).
  • kr 49,-
    +
    -
    3|3|34
    188
    Suitable for T-REX 600DFC(H60239A)< /br>6061-T6 Aluminum alloy material and CNC processed.
    kr 149,-
    +
    -
    3|2|34
    188
    Suitable for T-REX 600DFC(H60239A)< /br>6061-T6 Aluminum alloy material and CNC processed.
    kr 146,-
    +
    -
    3|2|34
    188
    600DFC Main rotor grip arm integrated control link set< /br>Suitable for T-REX 600DFC(H60239A)< /br>6061-T6 Aluminum alloy material and CNC processed.
    kr 185,-
    +
    -
    3|2|34
    188
    H60243AT 600DFC Main Shaft
    kr 152,-
    +
    -
    3|2|34
    188
    Use for T-REX 600DFC(H60239A)
    kr 146,-
    +
    -
    3|12|34
    188
    Use for T-REX 600DFC
  • Manufactured utilizing POM material, sleek surface, with superior anti-wear characteristic.
  • kr 66,-
    +
    -
    3|3|34
    188
    Use for T-REX 550.600.700.800DFC/700N/700N 3G/700E/700E 3G/700 F3C .
    kr 39,-
    +
    -
    3|3|34
    188
    Utilizes dual point attachment design for zero play and higher precision control feel.
    Constructed with CNC aluminum alloy, with precision ball bearing at moving points, improving structure rigidity and smoothness, allowing rudder control to be
    kr 319,-
    +
    -
    3|8|34
    188
    Utilizes dual point attachment design for zero play and higher precision control feel.
    Constructed with CNC aluminum alloy, with precision ball bearing at moving points, improving structure rigidity and smoothness, allowing rudder control to be
    kr 316,-
    +
    -
    3|2|34
    188
    H60252AT 600 Tail Torque Tube Unit
    kr 573,-
    +
    -
    3|1|34
    188
    600E PRO Metal Shapely Reinforcement Plate And Brace Assembly
    Suitable for T-REX 600E PRO.
    Brand new CNC metal reinforcement plate and brace effectively increase the torsion stength of main frame, under extreme 3D maneuver, you can strongl
    kr 175,-
    +
    -
    3|8|34
    188
    Precision CNC machined module 1 main gear for minimal noise and high energy transfer efficiency.
    Use for T-REX 600 PRO/550E series.
    kr 229,-
    +
    -
    3|1|34
    188
    Use for T-REX 600PRO/600EFL PRO/550E/550X
    Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage.
    kr 122,-
    +
    -
    3|4|34
    188
    Use for T-REX 550/600 class. Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage.
    kr 117,-
    +
    -
    3|3|34
    188
    Use for T-REX 600
    A power upgrade system designed specifically to bump up the power output of T-Rex 600E Pro by 30pst by upgrading the motor from 600MX motor (3300w/5500w) to 750MX/530KV motor (4400w/7260w). The feel as if a turbo charger was a
    kr 427,-
    +
    -
    3|2|34
    188
    M1. Precision CNC machined module 1 main gear for minimal noise and high energy transfer efficiency.
    Use for T-REX 600 PRO series .
    Must with Motor Slant Thread Pinion Gear 14T( H60G006XXW).
    kr 169,-
    +
    -
    3|4|34
    188
    Use for T-REX 600E PRO.
    Brand new M1 motor helical pinion with Stainless steel material. This high strength and high rigidity characteristics can help to increase wear resistance and longevity.
    600 PRO Must with CNC Slant Thread Main Drive
    kr 39,-
    +
    -
    3|8|34
    188
    Use for T-REX 550/600.
    Must with:F8-14MThrust Bearing(H60R001XXW).
    kr 82,-
    +
    -
    3|2|34
    188
    Use for T-REX 550/600.
    Brand new design for 600 Feathering Shaft, both ends of shaft increased thickness from 6mm to 8mm, so its whole external diameter is equal in 8mm thick, which can effectively enhance strength of main rotor system. In addi
    kr 127,-
    +
    -
    3|15|34
    188
    H60H004XXT 600 CCPM Metal Swashplate
    kr 345,-
    +
    -
    3|2|34
    188
    Use for T-REX 600.
    Must with:600 Feathering Shaft(H60H001XXW).
    kr 69,-
    +
    -
    3|3|34
    188
    T-REX metal tail rotor shaft assembly features high precise bearing structure and high rigid CNC processes aluminum alloy material, and therefore this refitting component is absolutely helpful for the accuracy of flying movement control and the stab
    kr 49,-
    +
    -
    3|3|34
    188
    Use for T-REX 550E/600/600 Nitro/600 PRO
    kr 62,-
    +
    -
    3|6|34
    188
    Brand new matting carbon tailboom using carbon fiber and aluminum imbedded technology, features light weight and high strength, its unique matting carbon color coupled with whole helicopter, definitely let your helicopter outstanding in the flying f
    kr 249,-
    +
    -
    3|1|34
    188
    Suitable for T-REX 550/600. Must with 550FL Flybarless Rotor Head System(H55H002XXT) or 600FL Flybarless Rotor Head System(H60H003XXT)
    kr 57,-
    +
    -
    0|0|34
    188
    Suitable for T-REX 650X
    kr 255,-
    +
    -
    3|1|34
    188
    Passer til T-REX 650X
    kr 267,-
    +
    -
    3|1|34
    188
    Passer til T-REX 650X
    kr 267,-
    +
    -
    3|1|34
    188
    Suitable for T-REX 650X
    kr 165,-
    +
    -
    3|1|34
    188
    Suitable for T-REX 650X
    kr 179,-
    +
    -
    3|5|34
    188
    Suitable for T-REX 650X
    kr 159,-
    +
    -
    3|2|34
    188
    Suitable for T-REX 650X
    kr 179,-
    +
    -
    3|2|34
    188
    Suitable for T-REX 650X
    kr 156,-
    +
    -
    3|2|34
    188
    Suitable for T-REX 650X - 650X Shapely Reinforcement Plate And Brace Assembly
    kr 189,-
    +
    -
    3|3|34
    188
    Suitable for T-REX 650X
    kr 165,-
    +
    -
    3|1|34
    188
    Suitable for T-REX 650X
    kr 182,-
    +
    -
    3|1|34
    188
    Suitable for T-REX 650X
    kr 109,-
    +
    -
    3|1|34
    188
    Suitable for T-REX 650X
    kr 69,-
    +
    -
    3|1|34
    188
    Suitable for T-REX 650X
    kr 55,-
    +
    -
    3|4|34
    188
    Suitable for T-REX 650X
    kr 99,-
    +
    -
    3|2|34
    188
    Suitable for T-REX 650X
    kr 57,-
    +
    -
    3|2|34
    188
    H65B017XXT Canopy Nut (4)
    kr 29,-
    +
    -
    3|2|34
    188
    H65B018XXT 650X Upgraded Canopy Mounting Bolt
    kr 112,-
    +
    -
    3|3|34
    188
    Suitable for T-REX 650X
    kr 89,-
    +
    -
    3|2|34
    188
    H65G002XXT 650X 131T M0.8 Autorotation Tail Drive Gear
    kr 127,-
    +
    -
    3|7|34
    188
    H65G003XXT 650X M0.8 Torque Tube Front Drive Gear Set 34T
    kr 119,-
    +
    -
    3|4|34
    188
    Suitable for T-REX 650X
    kr 156,-
    +
    -
    3|4|34
    188
    H65T001XXT Tail Belt Unit
    kr 507,-
    +
    -
    3|2|34
    188
    Suitable for T-REX 650X
    kr 242,-
    +
    -
    3|1|34
    188
    H65T003XXT 650X Carbon Fiber Tail Boom
    kr 249,-
    +
    -
    3|3|34
    188
    H65T004XXT 650X Torque Tube
    kr 115,-
    +
    -
    3|8|34
    188
    Suitable for T-REX 650X
    kr 156,-
    +
    -
    3|9|34
    188
    H65T006XXT Tail Pitch Assembly
    kr 159,-
    +
    -
    3|4|34
    188
    H65T007XXT Tail Pitch Control Link
    kr 45,-
    +
    -
    3|2|34
    188
    H65T008XXT 650X Carbon Fiber Tail Boom. 2stk i pakken.
    kr 137,-
    +
    -
    3|5|34
    188
    Suitable for T-REX 650X
    kr 43,-
    +
    -
    3|2|34
    188
    H6NB001XXT 600XN Carbon Fiber Main Frame(U)
    kr 289,-
    +
    -
    3|2|34
    188
    H6NB002XXT 600XN Carbon Fiber Main Frame(L)
    kr 289,-
    +
    -
    3|2|34
    188
    H6NB003XXT 600XN Shapely Reinforcement Plate And Brace Assembly
    kr 245,-
    +
    -
    3|2|34
    188
    H6NB004XXT 600XN Main Shaft Bearing Block
    kr 255,-
    +
    -
    3|1|34
    188
    H6NB005XXT 600XN The 3rd Main Shaft Bearing Block
    kr 185,-
    +
    -
    3|1|34
    188
    H6NB006XXT 600XN Main Frame Mounting Bolt
    kr 119,-
    +
    -
    3|2|34
    188
    H6NB007XXT 600XN Bottom Plate
    kr 267,-
    +
    -
    3|2|34
    188
    H6NB008XXT 600XN Frame Mounting Block
    kr 175,-
    +
    -
    3|2|34
    188
    H6NB009XXT 600XN Engine Mount
    kr 267,-
    +
    -
    3|2|34
    188
    H6NB010XXT 600XN Rudder Servo Mount Set
    kr 199,-
    +
    -
    3|2|34
    188
    H6NB011XXT 600XN Receiver Mount
    kr 182,-
    +
    -
    3|2|34
    188
    H6NB012XXT 600XN Canopy Support Set
    kr 57,-
    +
    -
    3|2|34
    188
    Suitable for T-REX 600XN
    kr 139,-
    +
    -
    3|1|34
    188
    H6NB014XXT 600XN Engine Fan Cover Set
    kr 142,-
    +
    -
    3|2|34
    188
    H6NB015XXT 600XN Clutch/Start Shaft
    kr 149,-
    +
    -
    3|6|34
    188
    H6NB016XXT 600XN Clutch Bell Set
    kr 235,-
    +
    -
    3|1|34
    188
    H6NB017XXT 600XN Metal Drive Gear Assembly
    kr 637,-
    +
    -
    3|2|34
    188
    Use for T-REX 600N/600E/550
    Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage.
    Must with A
    kr 149,-
    +
    -
    3|2|34
    188
    H6NG002XXT 600XN Idler Pulley Spur Gear
    kr 235,-
    +
    -
    3|2|34
    188
    H6NG003XXT Engine Spur Gear Set/20T
    kr 229,-
    +
    -
    3|2|34
    188
    Suitable for T-REX 600N DFC
    Suitable to use with T-REX 600DFC Main Rotor Head Upgrade Set (H60239A)
    kr 109,-
    +
    -
    3|13|34
    188
    Suitable for T-REX 600N DFC, ( for ramme med ekstra opplagring under autorotasjonsgir )
    Suitable to use with T-REX 600DFC Main Rotor Head Upgrade Set (H60239A)
    kr 127,-
    +
    -
    3|4|34
    188
    Suitable for T-REX 600XN
    kr 229,-
    +
    -
    3|2|34
    188
    H6NH005XXT 600XN CCPM Metal Swashplate
    kr 356,-
    +
    -
    3|1|34
    188
    Suitable for T-REX 600XN
    kr 173,-
    +
    -
    3|4|34
    188
    Use for T-REX 600N
    kr 139,-
    +
    -
    3|4|34
    188
    H6NT002XXT 600XN Tail Boom Mount Set
    kr 142,-
    +
    -
    3|3|34
    188
    H6NT003XXT 600XN Carbon Fiber Vertical Stabilizer
    kr 249,-
    +
    -
    3|1|34
    188
    H6NT004XXT 600XN Carbon Tail Control Rod Assembly
    kr 149,-
    +
    -
    3|2|34
    188
    H6NZ001XXT 600XN Linkage Rod Set
    kr 133,-
    +
    -
    3|1|34
    188
    6061-T6 Aluminum alloy material and CNC processed?
  • Use for T-REX 700E.
  • kr 267,-
    +
    -
    3|2|34
    188
  • 700E Receiver Mount x 1
  • 700N Elevator Servo Mount x 1
  • 600E Elevator Servo Mount x 1
  • 700N Servo Mounting Plate x 1
  • Socket button head screw x 2(M3x14mm)
  • Socket Button Head Collar Screw x 2(M3x6mm)
  • Socket button head self tapping
  • kr 97,-
    +
    -
    3|2|34
    188
    H70054T Motor Pinion Gear 12T
    kr 49,-
    +
    -
    3|4|34
    188
    Use for T-REX 550E/600E/600N/700E/700N.
    kr 69,-
    +
    -
    3|1|34
    188
    H70059T Landing Skid
    kr 75,-
    +
    -
    3|1|34
    188
    Landingunderstell som også kan brukes på T-REX 550E/600E/600N/700E/700N.
    700F3C Landing skid x 2
    kr 67,-
    +
    -
    3|4|34
    188
    Use for T-REX 700E.
  • Motor Slant Thread pinion gear 12T x 1
  • M4 set screw x 2(M4x4mm)
  • kr 76,-
    +
    -
    3|3|34
    188
    Use for T-REX 700E
    kr 209,-
    +
    -
    3|1|34
    188
    Tail Control Guide
  • Suitable for T-REX 700E F3C / 700E / 700N
  • kr 75,-
    +
    -
    0|0|34
    188
    Use for T-REX 700E / 700E F3C V1 V2.
  • 6061-T6 Aluminum alloy material and CNC processed.
  • kr 349,-
    +
    -
    3|4|34
    188
    H70086AT Reciver Mount erstatter H70086T.
    kr 239,-
    +
    -
    3|1|34
    188
    6061-T6 Aluminum alloy material and CNC processed
  • Use for T-REX 700E / 700E F3C
  • kr 183,-
    +
    -
    3|1|34
    188
    700DFC Main rotor grip arm integrated control link set.
    Suitable for T-REX 700DFC.(H70089A) .6061-T6 Aluminum alloy material and CNC processed.
    kr 223,-
    +
    -
    3|3|34
    188
    H70093AT 700E DFC Main Shaft
    kr 172,-
    +
    -
    0|0|34
    188
    Suitable for T-REX700DFC.(H70089A)< /br>6061-T6 Aluminum alloy material and CNC processed
    kr 185,-
    +
    -
    0|0|34
    188
    Use for T-REX 700DFC.
    Manufactured utilizing POM material, sleek surface, with superior anti-wear characteristic
    kr 55,-
    +
    -
    3|3|34
    188
    Utilizes dual point attachment design for zero play and higher precision control feel.
    Constructed with CNC aluminum alloy, with precision ball bearing at moving points, improving structure rigidity and smoothness, allowing rudder control to be
    kr 382,-
    +
    -
    0|-1|34
    188
    Use for Black Shark 3 - 700 fuselage.
    kr 127,-
    +
    -
    3|1|34
    188
    Use for Black Shark ? 700 / 760 F3C Fuselage.
    kr 127,-
    +
    -
    3|1|34
    188
    Skruesett for T-Rex 550,600 og 700. Stort utvalg med skruer, skiver og muttere. Se bilder for innhold.
    kr 249,-
    +
    -
    3|4|34
    188
    Use for T-REX 700E
    kr 169,-
    +
    -
    3|2|34
    188
    Use for T-REX 700E
    New style swash anti-rotation guide with embedded anti-wear material, effectively minimize the wear between swashplate long ball and guide
    kr 199,-
    +
    -
    3|2|34
    188
    6061-T6 Aluminum alloy material and CNC processed
    Apply for T-REX 700E/700E DFC.
    kr 165,-
    +
    -
    3|2|34
    188
    Verktøy for å enklere stille inn swashplaten på alignhelikopter. Ved hjelp av denne får man lettere stilt swashplaten helt i vater både på topp, bunn og i senterposisjon.
    kr 95,-
    +
    -
    3|8|34
    188
    6061-T6 Aluminum alloy material and CNC processed. Apply for T-REX 700E DFC.
    kr 193,-
    +
    -
    3|4|34
    188
    Use for 700DFC
    kr 79,-
    +
    -
    3|2|34
    188
    6061-T6 Aluminum alloy material and CNC processed
    Use for T-REX 550X/700E DFC.
    kr 69,-
    +
    -
    3|10|34
    188
    Metal Shapely Reinforcement Plate And Brace Assembly
    Suitable for T-REX 700E/800E. - Brand new CNC metal reinforcement plate and brace effectively increase thetorisional stength of main frame, under extreme 3D maneuver, you can strongly feel it
    kr 303,-
    +
    -
    3|3|34
    188
    H70B005XXT 700X Carbon Fiber Main Frame(L)
    kr 303,-
    +
    -
    0|0|34
    188
    H70B006XXT 700X Carbon Fiber Main Frame(R)
    kr 303,-
    +
    -
    0|0|34
    188
    H70B007XXT 700X Carbon Fiber Main Frame
    kr 249,-
    +
    -
    3|1|34
    188
    H70B008XXT 700X Frame Washer
    kr 45,-
    +
    -
    3|4|34
    188
    H70B009XXT 700X Servo Mount Set
    kr 169,-
    +
    -
    3|1|34
    188
    H70B010XXT 700X Canopy Support Set
    kr 69,-
    +
    -
    3|1|34
    188
    H70B011XXT 700X Canopy Mounting Bolt
    kr 109,-
    +
    -
    3|2|34
    188
    H70B013XXT 700X Carbon Fiber Bottom Plate
    kr 179,-
    +
    -
    3|1|34
    188
    H70B014AXT 700X Receiver Mount
    kr 189,-
    +
    -
    3|4|34
    188
    H70B014BXT 700X Receiver Mount
    kr 189,-
    +
    -
    3|2|34
    188
    H70B015XXT 700X Frame Mounting Block
    kr 182,-
    +
    -
    3|2|34
    188
    H70B016XXT 700X Main Shaft Bearing Block
    kr 279,-
    +
    -
    3|2|34
    188
    H70B017XXT 700X The 3rd Main Shaft Bearing Block
    kr 129,-
    +
    -
    3|2|34
    188
    H70B018XXT 700X Anti Rotation Bracket
    kr 177,-
    +
    -
    3|3|34
    188
    H70B019XXT 700X Frame Mounting Bolt
    kr 99,-
    +
    -
    3|2|34
    188
    H70B020XXT 700X Motor Pinion Gear Bearing Mount
    kr 146,-
    +
    -
    3|1|34
    188
    H70B021AXT Motor Mount
    kr 146,-
    +
    -
    3|1|34
    188
    H70B022XXT 700X Speed Frame Mounting Bolt
    kr 82,-
    +
    -
    3|4|34
    188
    H70B030XXT TB70 Main Shaft Sleeve. Passer blant annet TB70
    kr 69,-
    +
    -
    3|2|34
    188
    Use for T-REX 700E/800E.
    Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage.
    Due to the m
    kr 112,-
    +
    -
    3|8|34
    188
    Use for T-REX 700E/800E.
    Brand new low drive gear ratio with high strength and wear resistance,effectively reduce the tail vibration during speedy rotation keeping well tail lock performance and power output to prevent unexpected structure iss
    kr 127,-
    +
    -
    3|2|34
    188
    H70G002AXT CNC Slant Thread Main Drive Gear/112T
    kr 279,-
    +
    -
    3|2|34
    188
    Precision CNC machined module 1 main gear for minimal noise and high energy transfer efficiency.
    Use for T-REX 700N/E 800E.
    Must with Motor Pinion Helical Gear 12T/M1(H70062).
    kr 207,-
    +
    -
    3|10|34
    188
    Use for T-REX 700E.
    kr 63,-
    +
    -
    3|1|34
    188
    Gear Ratio 1:4.95
    Use for T-REX 700 Nitro.
    Must with H7NG001AXW, M1 Torque Tube Front Drive Gear Set/21T.
    Use for T-REX 700E/800E.
    Must with H70G001AXW, M1 Torque Tube Front Drive Gear Set/22T
    kr 203,-
    +
    -
    3|2|34
    188
    Precision CNC machined module 1 main gear for minimal noise and high energy transfer efficiency.
    Use for T-REX 700E/800E. Must with H60225 Motor Pinion Helical Gear 13T
    kr 172,-
    +
    -
    3|4|34
    188
    Use for T-REX 800E/700E/600E PRO.
    Brand new M1 motor helical pinion with Stainless steel material. This high strength and high rigidity characteristics can help to increase wear resistance and longevity.
    800E Must with CNC Slant Thread Mai
    kr 65,-
    +
    -
    3|2|34
    188
    H70G010XXT Motor Slant Thread Pinion Gear 12T (L2)
    kr 119,-
    +
    -
    3|2|34
    188
    H70G011XXT Motor Slant Thread Pinion Gear 13T (L27)
    kr 89,-
    +
    -
    3|3|34
    188
    Use for T-REX 700X/700E/800E.
    Brand new low drive gear ratio with high strength and wear resistance,effectively reduce the tail vibration during speedy rotation keeping well tail lock performance and power output to prevent unexpected structure
    kr 225,-
    +
    -
    3|3|34
    188
    H70G013XXT 105T M1 Heli Auto Tail Drive Gear Set
    kr 249,-
    +
    -
    3|1|34
    188
    H70G014XXT torque Tube Rear Drive Gear Set 19T
    kr 189,-
    +
    -
    3|1|34
    188
    H70H004BXT 700X FL Designed Main Rotor Housing Set
    kr 286,-
    +
    -
    3|2|34
    188
    Suitable for T-REX 700/800. The new 700E Three-Blade Rotor Head is specially made from 3-D rotation surface process, as well as aerospace grade aluminum alloy, strongly enhance structural toughness and precision. Also painted with high texture and b
    kr 2.230,-
    +
    -
    3|1|34
    188
    H70H010XXT 700X Control Arm Set
    kr 185,-
    +
    -
    0|0|34
    188
    H70H011XXT 700E Tri-Blades Head Feathering Shaft
    kr 115,-
    +
    -
    3|3|34
    188
    H70H012XXT 700E Tri-Blades Head Damper
    kr 59,-
    +
    -
    3|1|34
    188
    H70H013XXT 700X Radius Arm
    kr 49,-
    +
    -
    3|1|34
    188
    H70H014XXT 700E Three-Blade Head Rotor Housing
    kr 329,-
    +
    -
    3|2|34
    188
    H70H016XXT 700E TiN Shaft
    kr 265,-
    +
    -
    3|3|34
    188
    H70H017XXT 700X High-Strength Main Shaft
    kr 179,-
    +
    -
    0|0|34
    188
    H70R002XXT F6-12M Thrust Bearing
    kr 89,-
    +
    -
    3|2|34
    188
    CNC processed. Must with 700E Metal Shapely Reinforcement Plate And Brace Assembly(H70B002XXT).
    kr 45,-
    +
    -
    3|3|34
    188
    H70T001AXT 700 Tail Rotor Holder
    kr 233,-
    +
    -
    3|2|34
    188
    H70T001BXT 700 Tail Rotor Holder
    kr 249,-
    +
    -
    3|1|34
    188
    H70T002BXT 700 Tail Rotor Hub
    kr 82,-
    +
    -
    3|1|34
    188
    Use for T-REX 700E/700N/800. Must with:700 Tail Rotor (H70T001XXT)
    kr 95,-
    +
    -
    3|5|34
    188
    Plastinnlegg til metall halebladgriper. Desse gir større kontaktflate mellom blad og bladgriper, og gir stivere holdekraft og forhindrer også skrap på rotorbladene.
    kr 69,-
    +
    -
    3|2|34
    188
    Use for T-REX 700 Nitro Pro / 700E. Brand new matting carbon tailboom using carbon fiber and aluminum imbedded technology, features light weight and high strength, its unique matting carbon color coupled with whole helicopter, definitely let your he
    kr 286,-
    +
    -
    3|2|34
    188
    Suitable for T-REX 700/800 . The brand new 700E three tail blade set is specially made from aerospace grade aluminum alloy with precise mechanical process, highly enhance structural rigidity and precision. Total 3 tail blades design allow to achieve
    kr 637,-
    +
    -
    3|2|34
    188
    H70T009XXT Tail Pitch Control Link
    kr 55,-
    +
    -
    3|1|34
    188
    H70T010XXT 700X Tail Boom Mount Set
    kr 142,-
    +
    -
    3|2|34
    188
    H70T011XXT 700 Tail Control Arm
    kr 182,-
    +
    -
    3|3|34
    188
    H70T010XXT 700X Tail Boom Mount Set
    kr 139,-
    +
    -
    3|8|34
    188
    Use for T-REX 800/700/600/550 DFC 3G Programmable Flybarless System
    Must with:600DFC CCPM Metal Swashplate(H60248)
    Must with:700DFC CCPM Metal Swashplate(H70098)
    kr 49,-
    +
    -
    3|2|34
    188
    Manufactured utilizing POM material, sleek surface, with superior anti-wear characteristic.
    Use for T-REX 800DFC/700DFC/600DFC/550DFC.
    Use for 600DFC CCPM Metal Swashplate (H60248) .
    Use for 700DFC CCPM Metal Swashplate (H70098) .
    kr 47,-
    +
    -
    3|2|34
    188
    Suitable for T-REX 700E/700N/700 F3C/800E. Must be used with 700FL Flybarless Rotor Head System (H70H002XXT)
    kr 127,-
    +
    -
    3|2|34
    188
    Use for T-REX 550X/700X. 700X Counter Thread Main Linkage Rod Set
    kr 149,-
    +
    -
    3|1|34
    188
    H70Z009XXT 700 Tail Drive Gear Spacer
    kr 29,-
    +
    -
    3|2|34
    188
    H70Z010AXT Linkage Ball M2.5
    kr 67,-
    +
    -
    3|1|34
    188
    Use for T-REX 760X. Brand new CG adjustable CNC Aluminum Battery Mount with movable latch design allow to adjust CG for different battery size, as well as providing great protection for the battery and convenient way for mounting.
    kr 367,-
    +
    -
    3|3|34
    188
    H76H001XXT 760X 3D Main Rotor Holder Arm
    kr 216,-
    +
    -
    3|1|34
    188
    H76H002XXT 760X F3C Main Rotor Holder Arm
    kr 223,-
    +
    -
    3|1|34
    188
    Passer til Align T-Rex 760X.
    kr 49,-
    +
    -
    3|2|34
    188
    H76T001XXT 760 Upgrade Tail Assembly
    kr 573,-
    +
    -
    3|3|34
    188
    Use for T-REX 760X. Brand new matting carbon tailboom using carbon fiber and aluminum imbedded technology, features light weight and high strength, its unique matting carbon color coupled with whole helicopter, definitely let your helicopter outstan
    kr 399,-
    +
    -
    3|2|34
    188
    Use for T-REX 760X. 6063-T5 Aluminum alloy material.
    kr 172,-
    +
    -
    3|2|34
    188
    Use for T-REX 760X
    kr 216,-
    +
    -
    3|2|34
    188
    Use for T-REX 760X. 6061-T6 Aluminum alloy material and CNC processed.
    kr 165,-
    +
    -
    3|2|34
    188
    Use for T-REX 700 Nitro DFC
    kr 532,-
    +
    -
    3|1|34
    188
    Use for T-REX 700 Nitro DFC
    kr 519,-
    +
    -
    3|2|34
    188
    Use for T-REX 700 Nitro DFC
    kr 127,-
    +
    -
    3|6|34
    188
    6061-T6 Aluminum alloy material and CNC processed.
    Use for T-REX 700 Nitro DFC
    kr 229,-
    +
    -
    3|2|34
    188
    6061-T6 Aluminum alloy material.
    Use for T-REX 700.
    Must with H7NT004XXW 700N DFC Torque Tube. H7NT004XXW Carbon Tail Control Rod Assembly.
    kr 79,-
    +
    -
    3|4|34
    188
    Use for T-REX 700 Nitro DFC
    kr 95,-
    +
    -
    3|7|34
    188
    Use for T-REX 700 Nitro DFC
    kr 93,-
    +
    -
    3|2|34
    188
    H7NB011AXT 700N Engine Fan Cover Set
    kr 133,-
    +
    -
    3|3|34
    188
    6061-T6 Aluminum alloy material and CNC processed.
    Use for T-REX 700N DFC.
    kr 139,-
    +
    -
    3|2|34
    188
    Use for T-REX 700 Nitro DFC
    kr 152,-
    +
    -
    3|2|34
    188
    Suitable for T-REX 700N DFC.
    As same as design concept of shapely Reinforcement plate and brace for T-REX 700E/800E helicopters, T-REX 700N Frame Shapely Stiffer not only effectively increase the torsional strength of main frame, buy also subtl
    kr 63,-
    +
    -
    3|10|34
    188
    H7NB016AXT 700XN Carbon Fiber Main Frame(U)
    kr 279,-
    +
    -
    3|1|34
    188
    H7NB017XXT 700XN Carbon Fiber Main Frame(L)
    kr 279,-
    +
    -
    3|2|34
    188
    H7NB018XXT 700XN Bottom Plate
    kr 255,-
    +
    -
    3|2|34
    188
    H7NB019XXT 700XN Rudder Servo Mount Set
    kr 183,-
    +
    -
    3|2|34
    188
    H7NB020XXT 700XN Clutch/Start Shaft
    kr 165,-
    +
    -
    3|2|34
    188
    H7NB021XXT 700XN Engine Mount
    kr 255,-
    +
    -
    3|1|34
    188
    H7NB022XXT 700XN The 3rd Main Shaft Bearing Block
    kr 185,-
    +
    -
    3|2|34
    188
    H7NB023XXT 700XN Main Frame Mounting Bolt
    kr 112,-
    +
    -
    3|2|34
    188
    H7NB024XXT 700XN Shapely Reinf Plate & Brace ass
    kr 223,-
    +
    -
    3|2|34
    188
    H7NB025XXT 700XN Receiver Mount
    kr 167,-
    +
    -
    3|2|34
    188
    H7NB026XXT 700XN Canopy Mounting Bolt
    kr 87,-
    +
    -
    3|5|34
    188
    H7NB026XXT 700XN Drive Gear Assembly
    kr 169,-
    +
    -
    3|4|34
    188
    H7NB029XXT 700XN Clutch Bell Set
    kr 199,-
    +
    -
    3|13|34
    188
    Use for T-REX 700XN. Aluminium alloy material. New 700XN Metal Drive Gear Assembly utilizes all-aluminum CNC machining technology for strengthen structure and coefficient of friction, allow to experience the high-performance flights. Super durable a
    kr 609,-
    +
    -
    0|0|34
    188
    Work with HN7125, for T-Rex 700N
    kr 99,-
    +
    -
    3|3|34
    188
    Work with HN7125, for T-Rex 700N
    kr 82,-
    +
    -
    3|5|34
    188
    Use for T-REX 700 Nitro Pro / 700E / 700L / 800E. Enhance structural strength also extend one-way bearing durability and service life.
    kr 277,-
    +
    -
    0|0|34
    188
    H7NG005XXT CNC Hel Thread Main Drive Gear/107T
    kr 215,-
    +
    -
    3|2|34
    188
    H7NG006XXT 700XN Idler Pulley Helical Gear
    kr 172,-
    +
    -
    3|2|34
    188
    H7NG008XXT M1 Engine Helical Gear Set/13T
    kr 129,-
    +
    -
    3|1|34
    188
    H7NR001XXT Bearings(625ZZ)
    kr 133,-
    +
    -
    3|1|34
    188
    Use for T-REX 700 Nitro DFC
    kr 106,-
    +
    -
    3|6|34
    188
    6061-T6 Aluminum alloy material.
    Use for T-REX 700.
    Must with H7NT004XXW 700N DFC Torque Tube. H7NT004XXW Carbon Tail Control Rod Assembly.
    kr 172,-
    +
    -
    3|4|34
    188
    Use for T-REX 700.
    Must with H7NT004XXW 700N DFC Torque Tube.
    H7NT004XXW Carbon Tail Control Rod Assembly.
    kr 303,-
    +
    -
    3|4|34
    188
    H7NT004AXT 700N DFC Torque Tube
    kr 165,-
    +
    -
    3|2|34
    188
    Use for T-REX 700 Nitro DFC
    kr 199,-
    +
    -
    3|4|34
    188
    Carbon Fiber Tail Boom-Matte Black. Use for T-REX 700.
    Brand new matting carbon tailboom using carbon fiber and aluminum imbedded technology, features light weight and high strength, its unique matting carbon color coupled with whole helicopte
    kr 226,-
    +
    -
    3|1|34
    188
    H7NT007XXT 700 Tail Boom Support Rods
    kr 137,-
    +
    -
    3|1|34
    188
    H7NZ001XRT M3 Special Washer-Red
    kr 87,-
    +
    -
    3|4|34
    188
    H7NZ002XXT 700XN Linkage Rod Set
    kr 149,-
    +
    -
    3|2|34
    188
    Use for T-REX 800E PRO.
    kr 756,-
    +
    -
    3|1|34
    188
    Use for T-REX 800E PRO.
    kr 759,-
    +
    -
    3|1|34
    188
    H80B039XXT 800E PRO Canopy Mounting Bolt
    kr 92,-
    +
    -
    3|4|34
    188
    Designed specifically for attaching the aerial photography gimbals to T-Rex 800E. The assembly features high rigidity to withstand the higher payload of aerial photography equipment and increase the stability during takeoff/landings.
    kr 437,-
    +
    -
    3|2|34
    188
    Suitable for T-REX 800E / M480L / M690L.
    kr 85,-
    +
    -
    3|5|34
    188
    Use for H80F001XXW 800E Aerial Photography Landing Gear Assembly.
    kr 63,-
    +
    -
    3|4|34
    188
    Use for T-REX 700E/700N/800E.
    Innovative composite of fiber material for landing gear, unique stylish shape, functional intensity and visual beauty are both innovative design.
    kr 319,-
    +
    -
    3|1|34
    188
    Use for 800E
    kr 379,-
    +
    -
    3|2|34
    188
    Use for T-REX 800E
    kr 145,-
    +
    -
    3|3|34
    188
    H80T011AXT 800E Torque Tube
    kr 229,-
    +
    -
    3|1|34
    188
    Use for T-REX 700E/700N/800E.
    Using competitive material and special imbedded technology for vertical tail, enhanced its structural strength and boutique texture efficiently, vivacious color providing excellent visibility.
    kr 242,-
    +
    -
    3|1|34
    188
    Brand new matting carbon tailboom using carbon fiber and aluminum imbedded technology, features light weight and high strength, its unique matting carbon color coupled with whole helicopter, definitely let your helicopter outstanding in the flying f
    kr 329,-
    +
    -
    3|1|34
    188
    The ball link are manufactured utilizing POM material, sleek surface, with superior anti-wear characteristic.
    Use for T-REX 800E DFC
    kr 102,-
    +
    -
    3|1|34
    188
    Use for T-REX 800E DFC
    kr 99,-
    +
    -
    3|1|34
    188
    HB40B001XXT Upper Main Frame Left - TB40
    kr 269,-
    +
    -
    3|1|34
    188
    HB40B002XXT Upper Main Frame Right - TB40
    kr 269,-
    +
    -
    3|1|34
    188
    HB40B003XXT Lower Main Frame Left - TB40
    kr 265,-
    +
    -
    3|1|34
    188
    HB40B004XXT Lower Main Frame Right - TB40
    kr 265,-
    +
    -
    3|1|34
    188
    HB40B005XXT ESC Mount - TB40
    kr 89,-
    +
    -
    3|1|34
    188
    HB40B007XXT Battery Mount - TB40
    kr 125,-
    +
    -
    3|3|34
    188
    HB40B008XXT Battery Latch - TB40
    kr 125,-
    +
    -
    3|2|34
    188
    HB40B009XXT Main Shaft Sleeve - TB40
    kr 63,-
    +
    -
    3|2|34
    188
    HB40B010XXT Main Shaft Bearing Block Base (Upper) - TB40
    kr 235,-
    +
    -
    3|1|34
    188
    HB40B011XXT Main Shaft Bearing Block - TB40
    kr 189,-
    +
    -
    3|1|34
    188
    HB40B012XXT Frame Mounting Bolt - TB40
    kr 79,-
    +
    -
    3|1|34
    188
    HB40B015XXT Anti Rotation Bracket - TB40
    kr 197,-
    +
    -
    3|1|34
    188
    HB40B016XXT Front DriveShaft Bearing House - TB40
    kr 143,-
    +
    -
    3|1|34
    188
    HB40B017XXT Main Shaft 3rd Bearing Block - TB40
    kr 172,-
    +
    -
    3|2|34
    188
    HB40B018XXT Motor Mount Assembly - TB40
    kr 229,-
    +
    -
    3|1|34
    188
    HB40B020XXT Canopy Support Bolt Set - TB40
    kr 99,-
    +
    -
    3|3|34
    188
    HB40B023XXT Slant Thread Mai Drive Gear 46 - TB40
    kr 125,-
    +
    -
    3|3|34
    188
    HB40B029XXT Motor Drive Belt - TB40
    kr 89,-
    +
    -
    3|2|34
    188
    HB40B030XXT Tail Drive Belt - TB40
    kr 115,-
    +
    -
    3|5|34
    188
    HB40B031XXT Canopy Mounting Bolt - TB40
    kr 63,-
    +
    -
    3|3|34
    188
    HB40F001XOT Landing Skid Orange - TB40
    kr 76,-
    +
    -
    3|1|34
    188
    HB40F001XXT Landing Skid - TB40
    kr 75,-
    +
    -
    3|7|34
    188
    HB40F002XXT Landing Skid Mount - TB40
    kr 95,-
    +
    -
    3|2|34
    188
    HB40H002XXT Main Rotor Holder - TB40
    kr 223,-
    +
    -
    3|1|34
    188
    HB40H003XXT Control Arm Set - TB40
    kr 189,-
    +
    -
    3|5|34
    188
    HB40H004XXT Spindle - TB40
    kr 67,-
    +
    -
    3|5|34
    188
    HB40H005XXT Main Shaft - TB40
    kr 133,-
    +
    -
    3|5|34
    188
    HB40H006XXT CCPM Metal Swashplate - TB40
    kr 223,-
    +
    -
    3|1|34
    188
    HB40T001XXT Front Tail Boom Mount Set - TB40
    kr 109,-
    +
    -
    3|2|34
    188
    HB40T002XXT Tail Boom Mount - Rear - TB40
    kr 152,-
    +
    -
    3|2|34
    188
    HB40T003XXT Tail Belt Unit - TB40
    kr 285,-
    +
    -
    3|1|34
    188
    HB40T004XXT Belt Tail Spindle Set - TB40
    kr 159,-
    +
    -
    3|1|34
    188
    HB40T005XXT Tail Rotor Control Arm Set - TB40
    kr 172,-
    +
    -
    3|2|34
    188
    HB40T006XXT TB40 Tail Pitch Assembly
    kr 172,-
    +
    -
    3|4|34
    188
    HB40T007XXT Tail Rotor T-Shaped Mount Spindle Set - TB40
    kr 119,-
    +
    -
    3|1|34
    188
    HB40T008XXT Tail Rotor Holder - TB40
    kr 159,-
    +
    -
    3|2|34
    188
    HB40T009XOT Carbon Fiber Vertical Stabilizer - Orange - TB40
    kr 133,-
    +
    -
    3|1|34
    188
    HB40T009XXT Carbon Fiber Vertical Stabilizer TB40
    kr 129,-
    +
    -
    3|1|34
    188
    HB40T010XXT Carbon Fiber Tail Boom - TB40
    kr 172,-
    +
    -
    3|5|34
    188
    HB40T011XXT Carbon Tail Control Rod - TB40
    kr 119,-
    +
    -
    3|1|34
    188
    HB40Z001XXT Linkage Rod Set - TB40
    kr 77,-
    +
    -
    3|4|34
    188
    HB40Z002XXT Linkage Ball Set - TB40
    kr 119,-
    +
    -
    3|1|34
    188
    HB40Z003XXT Screw Parts - TB40
    kr 125,-
    +
    -
    3|3|34
    188
    HB60B001XXT Upper Main Frame - Left TB60
    kr 379,-
    +
    -
    3|1|34
    188
    HB60B002XXT Upper Main Frame - Right TB60
    kr 379,-
    +
    -
    3|1|34
    188
    HB60B003XXT Lower Main Frame - Left TB60
    kr 316,-
    +
    -
    3|1|34
    188
    HB60B004XXT Lower Main Frame - Right TB60
    kr 316,-
    +
    -
    3|1|34
    188
    HB60B007XXT Battery Mount - TB60
    kr 239,-
    +
    -
    3|12|34
    188
    HB60B008XXT Main Shaft Sleeve TB60
    kr 79,-
    +
    -
    3|2|34
    188
    HB60B009XXT Main Shaft Bearing - TB60
    kr 207,-
    +
    -
    3|1|34
    188
    HB60B010XXT Main Belt Pulley Assembly TB60
    kr 119,-
    +
    -
    3|2|34
    188
    HB60B011XXT Motor Drive Belt TB60
    kr 99,-
    +
    -
    3|1|34
    188
    HB60B012XXT Tail Drive Belt TB60 (HTD1800-3M Width:6mm)
    kr 172,-
    +
    -
    3|2|34
    188
    HB60B014XXT Motor Mount Assembly TB60
    kr 269,-
    +
    -
    3|1|34
    188
    HB60B015XXT Main Shaft Bearing Block Base Upper TB60
    kr 286,-
    +
    -
    3|1|34
    188
    HB60G001XXT Main Drive Gear 62T TB60 (2)
    kr 199,-
    +
    -
    3|6|34
    188
    HB60G002XXT 44T Belt Pullet Assembly TB60
    kr 379,-
    +
    -
    3|1|34
    188
    HB60H001XXT Main Rotor Housing Set TB60
    kr 316,-
    +
    -
    3|1|34
    188
    HB60H002XXT Main Rotor Holder TB60
    kr 325,-
    +
    -
    3|1|34
    188
    HB60H003XXT Main Rotor Holdr Arm TB60
    kr 199,-
    +
    -
    3|1|34
    188
    HB60H004XXT Spindle TB60
    kr 129,-
    +
    -
    3|5|34
    188
    HB60H005XXT Main Shaft TB60
    kr 173,-
    +
    -
    3|5|34
    188
    HB60H006XXT CCPM Metal Swashplate TB60
    kr 382,-
    +
    -
    3|1|34
    188
    HB60T001XXT Tail Belt Unit TB60
    kr 392,-
    +
    -
    3|1|34
    188
    HB60T002XGT Carbon Fiber Tail Boom TB60 Blue
    kr 223,-
    +
    -
    3|3|34
    188
    HB60T002XOT Carbon Fiber Tail Boom TB60 Orange
    kr 236,-
    +
    -
    3|1|34
    188
    HB60T002XXT Carbon Fiber Tail Boom TB60
    kr 223,-
    +
    -
    3|1|34
    188
    HB60Z001XXT Linkage Rod Set TB60
    kr 152,-
    +
    -
    3|3|34
    188
    HB70B001XXT TB70 Upper Main Frame - Left
    kr 446,-
    +
    -
    3|1|34
    188
    HB70B002XXT TB70 Upper Main Frame - Right
    kr 446,-
    +
    -
    3|1|34
    188
    HB70B003XXT TB70 Lower Main Frame - Left
    kr 335,-
    +
    -
    3|1|34
    188
    HB70B004XXT TB70 Lower Main Frame - Right
    kr 335,-
    +
    -
    3|1|34
    188
    HB70B014XXT Motor Mount TB70
    kr 207,-
    +
    -
    3|1|34
    188
    HB70B015XXT Tail Rudder Servo Mount TB70
    kr 175,-
    +
    -
    3|3|34
    188
    HB70B017XXT Canopy Clip TB70
    kr 59,-
    +
    -
    3|3|34
    188
    HB70B018XXT Frame Mounting Bolt TB70
    kr 59,-
    +
    -
    3|1|34
    188
    HB70B019XXT TB70 Canopy Mounting Bolt (2)
    kr 182,-
    +
    -
    3|4|34
    188
    HB70B021XXT Front Drive Main Shaft 15T TB70
    kr 395,-
    +
    -
    3|2|34
    188
    HB70B022AXT Motor Drive Belt 15mm TB70
    kr 115,-
    +
    -
    3|2|34
    188
    HB70B023XXT Tail Drive Belt TB70
    kr 179,-
    +
    -
    3|3|34
    188
    HB70B026AXT Belt Pulley Arm Set TB70
    kr 239,-
    +
    -
    3|1|34
    188
    HB70B027XXT TB70 Battery Mount 1pc
    kr 242,-
    +
    -
    0|0|34
    188
    HB70B028XXT Battery Latch TB70
    kr 143,-
    +
    -
    3|2|34
    188
    HB70B029XXT Reciver Mount TB70
    kr 143,-
    +
    -
    3|2|34
    188
    HB70B031XXT TB70 Antenna Holder
    kr 69,-
    +
    -
    0|0|34
    188
    HB70B032XXT Canopy Support Bolt Set TB70 passer til Align TB70.
    kr 79,-
    +
    -
    3|3|34
    188
    NYHED!
    HB70F001AXT Landing Skid TB70 erstatter HB70F001XXT.
    kr 112,-
    +
    -
    3|4|34
    188
    HB70F002XXT Landing Skid Mount TB70
    kr 89,-
    +
    -
    3|4|34
    188
    HB70G001XXT Slant Thread Main Drive Gear 62T TB70
    kr 207,-
    +
    -
    3|3|34
    188
    HB70G002XXT 50T Belt Pulley Assembly TB70
    kr 497,-
    +
    -
    3|1|34
    188
    HB70G003AXT 22T Motor Belt Pulley Assembly TB70
    kr 152,-
    +
    -
    3|1|34
    188
    HB70G008XXT 23T Tail Belt Pulley Assembly TB70
    kr 143,-
    +
    -
    3|1|34
    188
    HB70H001XXT Main Rotor Housing Set TB70
    kr 349,-
    +
    -
    3|1|34
    188
    HB70H002XXT Main Rotor Holder TB70
    kr 349,-
    +
    -
    3|1|34
    188
    HB70H003XXT Main Rotor Holder Arm TB70 passer til Align TB70.
    kr 199,-
    +
    -
    3|2|34
    188
    HB70H006XXT TB70 Control Arm Set
    kr 252,-
    +
    -
    3|2|34
    188
    HB70H007XXT Radius Arm TB70
    kr 89,-
    +
    -
    3|2|34
    188
    HB70H008XXT Main Shaft TB70
    kr 179,-
    +
    -
    3|5|34
    188
    HB70H009XXT TB70 CCPM Metal Swashplate
    kr 399,-
    +
    -
    3|1|34
    188
    HB70H010AXT Main Blade Holder TB70
    kr 125,-
    +
    -
    3|2|34
    188
    HB70H011XXT Spindle TB70
    kr 143,-
    +
    -
    3|10|34
    188
    HB70R003XXT Main Shaft TN70
    kr 175,-
    +
    -
    3|2|34
    188
    HB70R003XXT One-Way Bearing FE420Z - TB70
    kr 207,-
    +
    -
    3|1|34
    188
    HB70R005XXT Bearing(F686ZZ)
    kr 89,-
    +
    -
    3|1|34
    188
    HB70T001XXT Front Tail Boom Mount Set TB70
    kr 143,-
    +
    -
    3|2|34
    188
    HB70T003XXT TB70 Tail Belt Unit
    kr 69,-
    +
    -
    3|1|34
    188
    HB70T004AXT Tail Spindle Set TB70
    kr 207,-
    +
    -
    3|2|34
    188
    HB70T004AXT Tail Spindle Sleeve TB70
    kr 95,-
    +
    -
    3|3|34
    188
    HB70T005XXT TB70 Metal Tail Pitch Assembly
    kr 462,-
    +
    -
    3|1|34
    188
    HB70T006XXT Tail Rotor Holder TB70
    kr 399,-
    +
    -
    3|1|34
    188
    HB70T007XXT Carbon Fiber Vertical Stabilizer TB70
    kr 159,-
    +
    -
    3|2|34
    188
    HB70T008XOT TB70 Carbon Fiber Tail Boom - Orange
    kr 242,-
    +
    -
    3|2|34
    188
    HB70T008XXT TB70 Carbon Fiber Tail Boom
    kr 242,-
    +
    -
    3|3|34
    188
    HB70T009XXT TB70 Carbon Tail Control Rod Assembly
    kr 209,-
    +
    -
    3|2|34
    188
    HB70T010XXT Tail Control Guide TB70
    kr 76,-
    +
    -
    3|2|34
    188
    HB70T011XXT Tail Boom Clip TB70
    kr 59,-
    +
    -
    3|2|34
    188
    HB70T012AXT Tail T-Mount Spinde Damper TB70
    kr 76,-
    +
    -
    3|1|34
    188
    HB70Z001XXT Linkage Rod Set TB70
    kr 173,-
    +
    -
    3|4|34
    188
    HB70Z002XXT Linkage Ball Set TB70
    kr 189,-
    +
    -
    3|2|34
    188
    HB70Z003XXT M3 Special Washer
    kr 143,-
    +
    -
    3|1|34
    188
    HB70Z004XXT TB70 Screw Parts
    kr 127,-
    +
    -
    3|1|34
    188
    HBZ70T013AXT Tail Rotor T-Shaped Spindle Mount passer til Align TB70.
    kr 125,-
    +
    -
    3|2|34
    188
    HC1003T 100 Painted Canopy
    kr 57,-
    +
    -
    3|2|34
    188
    HCB4001T Painted Canopy Orange - TB40
    kr 286,-
    +
    -
    3|3|34
    188
    2 sett med rotorblader til T-Rex 150
    kr 93,-
    +
    -
    3|4|34
    188
    HD123BBT 150 Main Blades-White til T-Rex 150X
    kr 95,-
    +
    -
    3|5|34
    188
    2 sett med rotorblader til T-Rex 150
    kr 49,-
    +
    -
    3|7|34
    188
    2 sett med rotorblader til T-Rex 150
    kr 49,-
    +
    -
    3|8|34
    188
    2 sett med rotorblader til T-Rex 150
    kr 49,-
    +
    -
    3|9|34
    188
    HE1G005XXT Torque Tube Front Drive Gear Set 19T
    kr 215,-
    +
    -
    3|3|34
    188
    HE1G006XXT TiN Torque Tube Rear Drive Gear Set19T
    kr 275,-
    +
    -
    3|5|34
    188
    Passer til T-REX 700. 800 og Align E1.
    kr 479,-
    +
    -
    3|1|34
    188
    HE50H19T 50 Connecting Rod
    kr 87,-
    +
    -
    3|8|34
    188
    USB-lader for to batterier til T-Rex 100. Laderen har medfølgende USB-kabel slik at man kan lade fra de fleste pc-er.
    kr 156,-
    +
    -
    3|10|34
    188
    HEG15004T 150GRS Flybarless System Set
    kr 509,-
    +
    -
    0|0|34
    188
    Suitable for HEC10001 CH100 Li-po Charger.
    Suitable for HER00001 AT 100 Transmitter set
    kr 106,-
    +
    -
    3|8|34
    188
    HEP00018T A10 Transmitter Simulator Kabel
    (1)
    kr 89,-
    +
    -
    3|2|36
    188
    Use For T-Rex 150/Suitable for the 150 MRS 3 in 1 Controller.
    kr 35,-
    +
    -
    3|2|34
    188
    HEP15003T 150 Motor Wire Set
    kr 77,-
    +
    -
    0|0|34
    188
    HEP15004T 150GRS Double Sided Tape
    kr 59,-
    +
    -
    3|2|34
    188
    Suitable for the 3GX MR gryo and Flybarless sensor.
    kr 35,-
    +
    -
    3|5|34
    188
    Suitable for APS Gyro
    kr 82,-
    +
    -
    3|9|34
    188
    Apply to 450 Scale Fuselage 500E/500D,EC-135 450 Scale Fuselage.
  • EC-135 Skid pipe x 2(F4.5xF5.5x218mm)
  • Skid pipe end cap x 4
  • kr 25,-
    +
    -
    3|3|34
    188
    Use for AGUSTA A-109 450 scale fuselages

  • Front Retractable Landing Gear x 1
  • Rear Retractable Landing Gear(R) x 1
  • Rear Retractable Landing Gear(L) x 1
  • kr 89,-
    +
    -
    3|2|34
    188
    HFSSTQ05T Starter Rubber
    kr 69,-
    +
    -
    3|1|34
    188
    Apply for ALIGN Superior Starter STQ 100(For Helicopter/For Airplane)
    (1)
    kr 235,-
    +
    -
    3|1|34
    188
    Use for T-Rex 150
    kr 215,-
    +
    -
    3|12|34
    188
    Use for T-Rex 150
    kr 203,-
    +
    -
    3|1|34
    188
    HML15M12T T15 Tail Motor Assembly 1103 8000KV
    kr 242,-
    +
    -
    3|2|34
    188
    Made by alloy copper having high electrical conductivity. Surface dealing with high electrical conductivity gilt.
    kr 59,-
    +
    -
    3|1|34
    188
    460MX Main Shaft.
    kr 119,-
    +
    -
    3|2|34
    188
    Her er kulelagerne ferdig limt fast til akslingen. Passer på Align 500MX motoren
    kr 119,-
    +
    -
    3|2|34
    188
    HMP70M02T 700MX Motor Shaft
    kr 115,-
    +
    -
    3|1|34
    188
    HMP73M01T 730MX Motor Shaft
    kr 133,-
    +
    -
    3|2|34
    188
    Apply for RCM-BL750MX Motor.(HMP75M01)
    kr 115,-
    +
    -
    3|2|34
    188
    Apply for 850MX Brushless Motor
    kr 152,-
    +
    -
    3|6|34
    188
    HMP95M01T Motor Shaft for 950MX
    kr 335,-
    +
    -
    3|2|34
    188
  • Metal flybar control arm x 2
  • Flybar control rod x 2(F3.4x74.1mm)
  • Scoket screw x 4(M3x5mm)
  • M4 set screw x 2(M4x4mm)
  • kr 115,-
    +
    -
    3|8|34
    188
    HN6003T Clutch/Start shaft set
    kr 79,-
    +
    -
    3|17|34
    188
    HN6004T Engine Gear Set
    kr 79,-
    +
    -
    3|8|34
    188
    HN6005T Clutch Bell Set
    kr 137,-
    +
    -
    3|4|34
    188
    HN6007T Engine Bearing Block Set
    kr 73,-
    +
    -
    3|1|34
    188
    HN6010T-1 Engine Mount
    kr 115,-
    +
    -
    3|4|34
    188
    HN6011 Bearing Block
    kr 92,-
    +
    -
    3|4|34
    188
    HN6016T Canopy Support
    kr 69,-
    +
    -
    0|0|34
    188
    HN6018T Aluminum Hexagonal Bolt
    kr 82,-
    +
    -
    3|5|34
    188
    HN6020T-1 F5 Fuel Tube
    kr 49,-
    +
    -
    3|2|34
    188
    HN6021T Fuel Filter
    kr 47,-
    +
    -
    3|9|34
    188
    HN6022 3-vejs brændstoffilter fra justering leveres med ekstra filterindsats og klemme til lukning af brændstofforsyningen til påfyldningsslangen og karburatoren.
    kr 55,-
    +
    -
    3|18|130
    188
    HN6023 Hook And Loop Tape

  • Hook and loop tape x 2 (15x250mm)
  • Hook and loop tape x 3 (10x200mm)
  • kr 43,-
    +
    -
    3|5|1249
    188
    HN6024 Receiver Mount
    kr 59,-
    +
    -
    3|4|34
    188
    HN6025 Engine Fan Set
    kr 116,-
    +
    -
    3|10|34
    188
    HN6028T Clutch
    kr 159,-
    +
    -
    3|1|34
    188
    HN6029 Engine Fan Mount
    kr 152,-
    +
    -
    3|1|34
    188
    HN6031T Tail Boom
    kr 87,-
    +
    -
    3|1|34
    188
    HN6039T-1 F4 Fuel Tube
    kr 29,-
    +
    -
    3|3|34
    188
    JR Servo horn set 3stk runde
    kr 29,-
    +
    -
    3|2|34
    188
    HN6052T Linkage Ball-A Hardware Bag
    kr 69,-
    +
    -
    3|2|34
    188
    HN6061T-1 Feathering Shaft Sleeve Set
    kr 29,-
    +
    -
    3|3|34
    188
    HN6062T Plastic Servo Nut
    kr 36,-
    +
    -
    3|5|34
    188
    New design of one-way bearing for preventing locking.
  • Use for T-REX 550E/600E/600N.
  • Must with Autorotation Tail Drive Gear set (H60020A).
  • kr 189,-
    +
    -
    0|0|34
    188
    HN6064T New Main Gear Case Set
    kr 133,-
    +
    -
    3|1|34
    188
    HN6065TA Stainless Steel Linkage Rod(A)
    kr 33,-
    +
    -
    3|8|34
    188
  • 600N metal bearing cap x 2(F16xF21.5x2mm)
  • Metal bearing holder x 2
  • Bearing 6800ZZ x 2(F10xF19x5mm)
  • Socket screw x 8(M2x6mm)
  • Socket button head collar screw x 8(M3x10mm)
  • kr 175,-
    +
    -
    3|3|34
    188
    HN6072T High Strength Engine Fan
    kr 82,-
    +
    -
    3|2|34
    188
    -63%
    HN6074T Rotor Head Upgrade Assembly
    kr 95,-
    254|254,-
    +
    -
    3|3|34
    188
    HN6074T-84 Rotor Head Upgrade Assy / Blue
    kr 329,-
    +
    -
    3|3|34
    188
    HN6083 Fuel Tank Assembly
    kr 57,-
    +
    -
    0|0|34
    188
    HN6085T New Fuel Tank
    kr 95,-
    +
    -
    3|2|34
    188
    HN6088TA 600N Canopy Clip
    kr 46,-
    +
    -
    3|4|34
    188
  • Tail boom x 2(F20xF21.5x625mm)
  • Tail control guide x 2
  • Rudder control rod(B) x 1(F2x657mm)
  • Ball link x 2
  • kr 165,-
    +
    -
    3|3|34
    188
    HN6092QFT Metal Washout Control Arm/Silver

  • Metal washout control arm x 2
  • New radius arm x 2
  • Washer x 4(F3xF4.8x0.3mm)
  • Bearing 683ZZ x 4(F3xF7x3mm)
  • Bearing FMR52ZZ x 4(F2xF5xF6x2.3mm)
  • Collar x 2(F3xF4.9x1.5mm)
  • Socket scre
  • kr 137,-
    +
    -
    3|7|34
    188
    HN6100T Damper Rubber/Gray 70°
    kr 57,-
    +
    -
    3|2|34
    188
    HN6103CT V2 Metal Tail Rotor Holder
    kr 259,-
    +
    -
    3|2|34
    188
    HN6108T 600N Metal Canopy Mounting Bolt
    kr 18,-
    +
    -
    3|7|34
    188
    Use for T-REX 550E/600 3G Programmable Flybarless System
    kr 195,-
    +
    -
    3|1|34
    188
    Use for T-REX600 3G Programmable Flybarless System
  • Washer x 2
  • Radius arm x 2
  • FMR52ZZ Bearing x 4
  • Mixing arm bearing sleeve x 2
  • 683ZZ Bearing x 4
  • 600NFL Metal Washout Base x 1
  • 600NFL Metal control arm x 2
  • Socket button head sc
  • kr 195,-
    +
    -
    3|2|34
    188
    Use for T-REX600 3G Programmable Flybarless System
  • Use for T-REX600 3G Programmable Flybarless System
  • Pitch Gauge x 1
  • Socket button head screw(M3x8) x 1
  • kr 57,-
    +
    -
    3|7|34
    188
    Use for T-REX 600E 3G Flybaless System.
    Use for T-REX 600N 3G Flybaless System.
  • 600FL Main shaft x 2(F6*F10*191.8mm)
  • M4 Socket screw x 2(M4x4mm)
  • Socket collar screw x 2(M3x20mm)
  • M3 nut x 2
  • kr 112,-
    +
    -
    3|4|34
    188
    6061-T6 Aluminum alloy material and CNC processed
  • Use for T-REX 550E / 600E / 600N .
  • kr 122,-
    +
    -
    3|4|34
    188
    6061-T6 Aluminum alloy material and CNC processed.
  • Use for T-REX 550E / 600EFL PRO .
  • kr 122,-
    +
    -
    3|1|34
    188
  • Thrust bearing F5-10M x 2(5x10x4mm)
  • kr 86,-
    +
    -
    3|2|34
    188
    6061-T6 Aluminum alloy material and CNC processed
  • Use for T-REX 600N / 600NFL
  • kr 46,-
    +
    -
    3|5|34
    188
    HN7003T Thrust Bearing
    kr 99,-
    +
    -
    3|1|34
    188
    HN7009T Flybar Rod/570mm
    kr 52,-
    +
    -
    3|4|34
    188
    -59%
    HN7010T Main Shaft
    kr 39,-
    95|95,-
    +
    -
    3|28|34
    188
    Use for T-REX 700 Nitro and Limited
  • Metal washout control arm x 2
  • Radius arm x 2
  • Washer x 4(F3xF4.8x0.3mm)
  • Bearing 683ZZ x 4(F3xF7x3mm)
  • Bearing FMR52ZZ x 4(F2xF5x2.3mm)
  • Socket button head screw x 2(M3x12mm)
  • Collar x 2(F3xF4.9x1.
  • kr 137,-
    +
    -
    3|3|34
    188
    HN7016T Radius Arm
    kr 22,-
    +
    -
    3|4|34
    188
    Use for T-REX 700 Nitro and Limited
  • CCPM metal swashplate x 1
  • Linkage ball B(M3x4) x 7(F5x12mm)
  • Bearing(6706ZZ) x 1(F30xF37x4mm)
  • kr 303,-
    +
    -
    3|1|34
    188
    HN7018T One-Way Bearing Shaft
    kr 49,-
    +
    -
    3|2|34
    188
    Newly designed highly rigid 700 M0.7 main gear, manufactured through high precision CNC machining process, with wear resistant, low noise, and highly efficient energy transfer properties to dramatically increase power output.
  • Use for T-REX 700 Ni
  • kr 159,-
    +
    -
    3|1|34
    188
    Use for T-REX 700 Nitro Pro / 700E.
    kr 92,-
    +
    -
    3|2|34
    188
    HN7029T Carbon Stabilizer 2.0mm
    kr 216,-
    +
    -
    3|1|34
    188
    HN7030T Engine Mount
    kr 112,-
    +
    -
    3|1|34
    188
    6061-T6 Aluminum alloy material and CNC processed. Use for T-REX 700 Nitro Pro
    kr 245,-
    +
    -
    3|3|34
    188
    HN7032T 700 Carbon Fiber Tail Boom
    kr 319,-
    +
    -
    3|1|34
    188
    6061-T6 Aluminum alloy material and CNC processed?
  • Use for T-REX 700 Nitro Pro / 700E.
  • Metal aileron lever x 2(F11xF9x12mm)
  • Bearing MR95ZZ x 4(F5xF9x3mm)
  • Linkage ball C(M3x3.5) x 6(F5x8.5mm)
  • kr 145,-
    +
    -
    3|1|34
    188
    Use For T-Rex 700 Nitro and Nitro Pro
    kr 177,-
    +
    -
    3|4|34
    188
    HN7037AT M1 Engine Gear Set/14T
    kr 89,-
    +
    -
    3|3|34
    188
    HN7037T Engine Gear Set
    kr 89,-
    +
    -
    3|8|34
    188
    HN7039T Clutch
    kr 189,-
    +
    -
    3|3|34
    188
    HN7041T Metal Stabilizer Belt Set
    kr 139,-
    +
    -
    3|4|34
    188
    Use for T-REX 800 / 700 Nitro Pro / 700E.
    Must with 700 Metal Tail Rotor Holder(H70T001).
    Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Ef
    kr 159,-
    +
    -
    3|1|34
    188
    HN7044T Fuel Tank Guard
    kr 86,-
    +
    -
    3|1|34
    188
    HN7045T Fuel Tank
    kr 126,-
    +
    -
    3|2|34
    188
    HN7047T Tail Boom/Black
    kr 189,-
    +
    -
    3|2|34
    188
    HN7049QFT Skid Pipe Silver
    kr 59,-
    +
    -
    3|2|34
    188
    HN7049T Skid Pipe
    kr 59,-
    +
    -
    3|4|34
    188
    HN7050T Receiver Mount
    kr 76,-
    +
    -
    3|7|34
    188
    HN7051T Engine Fan Cover Set
    kr 116,-
    +
    -
    3|6|34
    188
    HN7052T Engine Fan
    kr 89,-
    +
    -
    3|2|34
    188
    HN7053BT Metal Tail Torque Tube Unit
    kr 635,-
    +
    -
    3|1|34
    188
    HN7054T 700 Tail Shaft Slide Bush
    kr 53,-
    +
    -
    3|7|34
    188
    HN7055AT Tail Boom Brace 700/700E
    kr 105,-
    +
    -
    3|9|34
    188
    HN7056AT 700N Torque Tube
    kr 156,-
    +
    -
    3|3|34
    188
    HN7058T-1 Ball Link
    kr 59,-
    +
    -
    3|3|34
    188
    HN7059T Canopy Nut
    kr 57,-
    +
    -
    3|2|34
    188
    HN7063T Main Blade Linkage Rod
    kr 39,-
    +
    -
    3|17|34
    188
    HN7064T Servo Linkage Rod
    kr 65,-
    +
    -
    3|4|34
    188
  • Bearing 6800ZZ x 4(F10xF19x5mm)
  • Use for metal main rotor holder.
  • kr 89,-
    +
    -
    3|2|34
    188
  • Bearing 6800ZZ x 2(F10xF19x5mm)
  • Bearing 695ZZ x 2(F5xF13x4mm)
  • Use for clutch
  • kr 107,-
    +
    -
    3|2|34
    188
  • Bearing F683ZZ x 2(F3xF7x3mm)
  • Use for elevator arm set.
  • kr 55,-
    +
    -
    3|6|34
    188
  • Bearing 6702ZZ x 2(F15xF21x4mm)
  • Use for one-way bearing set.
  • kr 63,-
    +
    -
    3|7|34
    188
    Kan også brukes til å låse passelstanga i korrekt posisjon for måling av pitch.
    kr 95,-
    +
    -
    3|3|34
    188
    Inneholder:
  • Main shaft spacer(1) x 1(F12xF16x1mm)
  • Main shaft spacer(1.2) x 1(F12xF16x1.2mm)
  • Main shaft spacer(0.8) x 1(F12xF16x0.8mm)
  • Main shaft spacer(0.5) x 1(F12xF16x0.5mm)
  • kr 55,-
    +
    -
    3|2|34
    188
    Use for T-REX 700 Nitro Pro /700E
    kr 66,-
    +
    -
    3|4|34
    188
    HN7077T Canopy Mounting Bolt
    kr 53,-
    +
    -
    3|22|34
    188
    HN7078T Canopy Support
    kr 82,-
    +
    -
    3|18|34
    188
    6061-T6 Aluminum alloy material and CNC processed, Use for T-REX 700X/700L/700E/700N/800E.
    kr 189,-
    +
    -
    3|2|34
    188
    HN7080T Linkage Ball-C Hardware Bag
    kr 76,-
    +
    -
    3|1|34
    188
    HN7081T Main Blade Screws Set
    kr 39,-
    +
    -
    3|2|34
    188
    HN7085T Bearing (6901ZZ) 2pc for Main Shaft Block
  • Bearing 6901ZZ x 2(F12xF24x6mm))
  • kr 73,-
    +
    -
    3|3|34
    188
    6061-T6 Aluminum alloy material and CNC processed
    Use for T-REX 700 Nitro Pro / 700E.
    Suitable for:700N Metal Tail Torque Tube Unit(HN7053A)
    Must be used with: HN7079A
    kr 163,-
    +
    -
    3|8|34
    188
    Hjelpemiddel slik at man kan montere flybar på flybarlesshodet til T-rex 700. Dette for å lettere kunne måle pitch
    Use for T-REX700 3G Programmable Flybarless System
  • Pitch Gauge x 1
  • Socket button head screw(M3x8) x 1
  • kr 63,-
    +
    -
    3|3|34
    188
    HN70B009XXT Front Driveshaft Bearing Housing TN70
    kr 252,-
    +
    -
    3|1|34
    188
    HN70F001XXT Landing Skid TN70
    kr 109,-
    +
    -
    3|10|34
    188
    HN70G004XXT 33T Belt Pulley Assembly Refit TN70
    kr 356,-
    +
    -
    3|1|34
    188
  • arm A x 2
  • Ball Link x 8
  • kr 67,-
    +
    -
    3|2|34
    188
    6061-T6 Aluminum alloy material and CNC processed?
  • Use for T-REX 700N/700E/550E.
  • kr 59,-
    +
    -
    3|1|34
    188
    Use for T-REX 700N / 700E.
  • Feathering Shaft Sleeve x 2 (F10.2xF17x21mm)
  • kr 57,-
    +
    -
    3|1|34
    188
    Use for T-REX 700N/ 700E.
  • 700 tailboom support rods reinforcement plates x 2(73X37X6mm)
  • Socket screw x 2(M3x10mm)
  • M3 nut x 2
  • kr 73,-
    +
    -
    3|2|34
    188
    Suitable for T-REX 700E / 700N.
    6061-T6 Aluminum alloy material and CNC processed.
    kr 446,-
    +
    -
    3|2|34
    188
    6061-T6 Aluminum alloy material and CNC processed.
  • Use for T-REX 700E / 700E F3C / 700N .
  • Use with 700 New Designed Main Rotor Head Assembly(HN7114) .
  • kr 137,-
    +
    -
    3|5|34
    188
    700N 104T M1 Helical Autorotation Tail Drive Gear Set.
    Gear Ratio 1:4.95 .Use for T-REX 700 Nitro.
    kr 189,-
    +
    -
    3|4|34
    188
    Use for T-REX 100
    kr 29,-
    +
    -
    3|30|34
    188
    Use for T-REX 150
    kr 55,-
    +
    -
    3|11|34
    188
    Use for T-REX 150
    kr 49,-
    +
    -
    3|15|34
    188
    Use for T-REX 150
    kr 49,-
    +
    -
    3|4|34
    188
    Use for T-REX 150
    kr 59,-
    +
    -
    3|4|34
    188
    Use for T-REX 150 - The new extension tail rotor can provide excellent tail lock performance whether its in general or extreme 3D flights!
    kr 52,-
    +
    -
    3|4|34
    188
    Use for T-REX 150 - The new extension tail rotor can provide excellent tail lock performance whether its in general or extreme 3D flights!
    kr 47,-
    +
    -
    3|3|34
    188
    Use for T-REX 150 - The new extension tail rotor can provide excellent tail lock performance whether its in general or extreme 3D flights!
    kr 57,-
    +
    -
    3|4|34
    188
    Use for T-REX 150 - The new extension tail rotor can provide excellent tail lock performance whether its in general or extreme 3D flights!
    kr 55,-
    +
    -
    3|2|34
    188
    Use for T-REX 150
    kr 33,-
    +
    -
    3|5|34
    188
    Use for T-REX 250
    kr 89,-
    +
    -
    3|2|34
    188
    Brug til T-Rex 300X, 2 sæt
    kr 63,-
    +
    -
    3|5|132
    188
    Use for T-REX 450
    The brand new extended tail rotor blades to match the 360mm main rotor blades also contributes to the tail locking performance. The new style paint scheme provides better visibility in midair.
    kr 45,-
    +
    -
    3|6|34
    188
    73mm plast haleblader, til eksempelvis T-Rex 500
    kr 47,-
    +
    -
    3|1|34
    188
    Use for T-REX 470L. New light-weight design, improve the efficiency of tail blade to make more precision on tail rudder control.
    kr 82,-
    +
    -
    3|5|34
    188
    Use for T-REX 470L. New light-weight design, improve the efficiency of tail blade to make more precision on tail rudder control.
    kr 76,-
    +
    -
    3|8|34
    188
    78mm plast haleblader, til eksempelvis T-Rex 500. 4stk/2par
    kr 99,-
    +
    -
    0|0|34
    188
    HS1003T Feather Spindle Shaft 3pcs
    kr 39,-
    +
    -
    3|25|34
    188
    HS1028 Bearings
    kr 52,-
    +
    -
    0|0|34
    188
    HS1029   Bearings
    kr 35,-
    +
    -
    3|14|34
    188
    HS1030   Bearings
    kr 42,-
    +
    -
    3|10|34
    188
    HS1031   Bearings
    kr 39,-
    +
    -
    3|3|34
    188
    HS1032   Bearings
    kr 39,-
    +
    -
    0|0|34
    188
    HS1033   Bearing Assembly (MR52ZZ)
    kr 29,-
    +
    -
    3|5|34
    188
    HS1102 Landing Skid (Yellow)
    kr 39,-
    +
    -
    0|0|34
    188
    HS1139T Upgrade Set
    kr 43,-
    +
    -
    3|7|34
    188
    HS1181T Main Blade Holder
    kr 45,-
    +
    -
    3|3|34
    188
    HS1184 Flybar Rod/220mm
    kr 25,-
    +
    -
    3|13|34
    188
    HS1193T Parts Bag
  • Washout linkage x 2
  • Collar screw(M1.4x6.5mm) x 2
  • Aluminum collar(F3XF5X2.5mm) x 2
  • Shaft ring(F6XF8X1.5mm) x 1
  • Collar(F1.4XF3X2.4mm) x 2
  • Canopy nut x 2
  • O-Ring(F3XF6.5X2mm) x 4
  • kr 29,-
    +
    -
    3|28|34
    188
    HS1212TA Canopy Mounting Bolt
    kr 27,-
    +
    -
    3|9|34
    188
    HS1217 High Carbon Steel Main Shaft
    kr 79,-
    +
    -
    3|9|34
    188
    This new main gear is great for the balance. New super strength plastic-steel material, multinational patent design, light weight, and special cooling blade design is good for lowering the temperature of electronic equipment and motors. It can effic
    kr 69,-
    +
    -
    3|2|34
    188
    This new main gear is great for the balance. New super strength plastic-steel material, multinational patent design, light weight, and special cooling blade design is good for lowering the temperature of electronic equipment and motors. It can effic
    kr 65,-
    +
    -
    3|3|34
    188
    HS1221T Tail Pitch Control Link
    kr 49,-
    +
    -
    3|3|34
    188
    HS1222 Bearing(MR74ZZ)
    kr 46,-
    +
    -
    3|1|34
    188
    Use for T-Rex 450 Pro
    kr 127,-
    +
    -
    0|0|34
    188
    HS1229 One-way Bearing. HF0612
    kr 59,-
    +
    -
    3|3|34
    188
    HS1232T Anti Rotation Bracket Spacer
    kr 25,-
    +
    -
    3|10|34
    188
    Use for T-REX450 Sport
  • Sport Anti rotation bracket x 1
  • Long linkage ball(M2x2.5) x 1(F4.75x19.68mm)
  • Socket button head self tapping screw x 2(T2x8mm)
  • kr 42,-
    +
    -
    3|5|34
    188
    HS1240 krog og sløjfe bånd til 450. 54x28mm.
    kr 26,-
    +
    -
    3|10|1249
    188
    HS1244T-00 450V2 Main frame black
    kr 139,-
    +
    -
    3|2|34
    188
    HS1250TA Metal Tail Servo Mount Set 450Sport
    kr 82,-
    +
    -
    3|1|34
    188
    HS1251 V2 Feathering Shaft
    kr 45,-
    +
    -
    3|15|34
    188
    HS1254 V2 Damper Rubber
    kr 20,-
    +
    -
    3|20|34
    188
    HS1264T Flybar Rod/220mm
    kr 49,-
    +
    -
    0|0|34
    188
    HS1265T Hook And Loop Fastening tape
    kr 45,-
    +
    -
    3|5|34
    188
    HS1266T Damper Rubber Set
    kr 36,-
    +
    -
    3|2|34
    188
    HS1267T Main Blade Holder/New
    kr 49,-
    +
    -
    3|5|34
    188
    HS1268T Thrust Bearing F3-8M
    kr 43,-
    +
    -
    3|5|34
    188
    HS1271T Tail Linkage Rod
    kr 25,-
    +
    -
    3|1|34
    188
    HS1273T Fiberglass Lower Frame Set/1.2mm
    kr 106,-
    +
    -
    3|3|34
    188
  • Linkage rod(A) x 2(F1.3x9mm)
  • Linkage rod(B) x 2(F1.3x12.5mm)
  • Linkage rod(D) x 2(F1.3x32mm)
  • Linkage rod(M) x 1(F1.3x19mm)
  • Linkage rod(N) x 1(F1.3x33mm)
  • Linkage rod(O) x 1(F1.3x28mm)
  • kr 25,-
    +
    -
    3|37|34
    188
    HS1285T Linkage Ball Set
    kr 63,-
    +
    -
    3|1|34
    188
    HS1291T V2 New Damper Rubber/Black 80°
    kr 43,-
    +
    -
    3|1|34
    188
    Use for T-REX 450 Sport / PRO / Sport V2
    kr 62,-
    +
    -
    3|1|34
    188
    Use for T-REX 450 Sport / PRO / Sport V2
    kr 63,-
    +
    -
    3|6|34
    188
    HS1293T-01 450 Landing Skid/White
    kr 47,-
    +
    -
    3|9|34
    188
    HS1296 450V3 Main Rotor Housing Set
  • Use for T-REX 450.
  • The new V3 main rotor housing is made based on high strength precision CNC processed aluminum alloy. The new extended design will increase its sability and sensitivity.
  • 450V3 Metal
  • kr 129,-
    +
    -
    3|2|34
    188
    HS1300T 450V3 Ball Link
  • Use for T-REX 450 SE/V2
  • 450V2 Ball link(A) x 2
  • 450V2 Ball link(B) x 2
  • kr 29,-
    +
    -
    3|35|34
    188
    Use for T-REX 450L/PLUS/PLUS DFC.
    kr 149,-
    +
    -
    3|1|34
    188
    HSD15006T T15M Digital Servo
    kr 415,-
    +
    -
    3|12|34
    188
    HSD15007T T15 Digital Servo
    kr 415,-
    +
    -
    3|2|34
    188
    HSP15003T DS150/DS155 Servo Horn Set
    kr 39,-
    +
    -
    3|10|34
    188
    HSP15006T T15 Servo Horn Set
    kr 73,-
    +
    -
    3|4|34
    188
    HSP15007T T15 Servo Gear Set
    kr 179,-
    +
    -
    3|2|34
    188
    HSP41502T DS415M/DS425M Upper/Lower Cover
    kr 39,-
    +
    -
    3|10|34
    188
    HSP42501T DS425M Servo Gear Set
    kr 99,-
    +
    -
    3|11|34
    188
    Use for ALIGN DS525 Servo
    kr 152,-
    +
    -
    3|6|34
    188
    3 servohorn til JR for bruk på 600E og 600EFL.
  • Use For JR Servo
  • Suitable for T-REX 600E / 600EFL PRO
  • kr 203,-
    +
    -
    3|3|34
    188
    Apply for ALIGN DS610/620/650 Servo
  • DS610/620 servo upper cover x 1
  • DS610/620 servo lower cover x 1
  • Screw x 4
  • O-Ring x 4
  • kr 29,-
    +
    -
    3|27|34
    188
    Use for ALIGN DS615 Servo
    kr 223,-
    +
    -
    0|0|34
    188
    Girsett til Align DS650 servo
    kr 159,-
    +
    -
    3|10|34
    188
    Use for ALIGN DS655 Servo
    kr 145,-
    +
    -
    3|7|34
    188
    Apply for ALIGN BL700H/750H
    kr 39,-
    +
    -
    3|5|34
    188
    Apply for ALIGN BL815H Servo
    kr 257,-
    +
    -
    3|4|34
    188
    HSP82003T DS820/DS820M Servo Circuit Board
    kr 126,-
    +
    -
    3|4|34
    188
    Apply for ALIGN BL855H Servo
    kr 183,-
    +
    -
    3|10|34
    188
    HT1003AT Drive Belt XL 397T
    kr 69,-
    +
    -
    3|2|34
    188
    HZ022AT Landing Skid Nut
    kr 27,-
    +
    -
    3|2|34
    188
    One-way Bearing Shaft
    kr 47,-
    +
    -
    3|1|34
    188
    HZ030T 347mm Tail Boom(XL)
    kr 49,-
    +
    -
    3|7|34
    188
    HZ053 Motor Pinion Gear 12T
    kr 52,-
    +
    -
    3|7|34
    188
    HZ054 Motor Pinion Gear 13T
    kr 42,-
    +
    -
    3|7|34
    188
    HZ055 Motor Pinion Gear 14T
    kr 35,-
    +
    -
    3|10|34
    188
    K10175TA børsteløs motorkølerplade
    kr 29,-
    +
    -
    3|33|128
    188
    K10383TA TP Balancer / Align Adapter
    kr 69,-
    +
    -
    3|10|205
    188
    K10384TA Juster Balancer / TP-adapter
    kr 69,-
    +
    -
    3|5|205
    188
    Use for T-REX 450 scale fuselages.
  • Wheel control arm(A) x3
  • Wheel control arm(A) x1
  • Front landing skid mount x2
  • Set screw x4(M3x3mm)
  • Self-tapping screw x4(M2x10mm)
  • M2 nut x4
  • kr 59,-
    +
    -
    3|8|34
    188
    Use for M424 Quadcopter.
    kr 63,-
    +
    -
    3|1|34
    188
    Use for M424 Quadcopter.
    kr 63,-
    +
    -
    3|7|34
    188
    Use for M424 Quadcopter.
    kr 73,-
    +
    -
    3|4|34
    188
    Use for M424 Quadcopter.
    kr 105,-
    +
    -
    3|1|34
    188
    Use for M424 Quadcopter.
    kr 105,-
    +
    -
    3|1|34
    188
    Use for M424 Quadcopter. 6061-T6 Aluminum alloy material and CNC processed.
    kr 49,-
    +
    -
    3|3|34
    637
    -54%
    Multicopter 3,5MM kvindelig terminal - Velegnet til M480L / M690L.
    kr 27,-
    59|59,-
    +
    -
    3|5|5